Watts WHT115 User Manual
Watts Model WHT115
High Temperature Shutoff Device
Added Safety, Easy to Install and High
Temperature Protection
Watts’ new high temperature shutoff device is designed to provide thermostatic protection for the shower. If the temperature
during the shower reaches 115˚F ±3˚F (46˚C) this device
instantly reduces the flow to less than 0.25 gpm (from 2.5
gpm). Once the temperature drops below 115˚F (46˚C), the
WHT115 automatically resets and resumes full flow within seconds. It is ideal for use with two handle, single handle, pressure balance and temperature control valves. It is easy to install
and can be used for new or existing applications.
Features
• Factory set at 115˚F (46˚C) shutoff limit for safety
• New ATA (Advanced Thermal Actuation) technology improves
performance
• Solid brass construction enhances durability
• Maximum flow rate 4.0 gpm (15.2 l/min)
• Easy to Install
Superior design ensures long-term reliability and
it is ideal for:
• Hospitals
• Hotels/Motels
• Private Residences
• Healthcare
• Schools
• Anywhere shower safety is a concern
Materials
Finish: Polished Chrome
Housing Material: Brass
Approvals
Certification: CSA
Listing: ASSE 1062
Flow — Temperature
Maximum Flow: 4.0 gpm (15.2 l/min)
Temperature Activation: 115°F (46°C) ± 3°F (1.6°C)
For Residential and Commercial Applications
ES-WHT115
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
–––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
WHT115
1062
ES-WHT115 0815 © Watts, 2008
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Water Safety & Flow Control Products
Dimensions — Weights
SIZE DIMENSIONS WEIGHTS
AB
in. mm in. mm in. mm lbs. kgs.
1
⁄2 13
15
⁄16 24 111⁄16 43 0.25 0.11
A
1
⁄2"
NPSM
1
⁄2"
NPSM
1
⁄2"
NPSM
B
Note:
Dimensions are shown ±1/2"
Dimensions in parentheses are in mm
Loading...