Watts PWFCTTM User Manual

For Residential and Light Commercial Applications

ES-WQ-PWFCTTM

Job Name

Job Location

Engineer

Approval

–––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

Series PWFCTTM

Top Mount Faucets

Size: 3⁄8" (10mm)

Features

• Top mount design – you’ll never need to crawl below the
sink again!

• Reduces installation labor

• Components touching water are stainless steel or non-

metallic

• Wide range of finishes, including chrome, brushed nickel, oil
rubbed bronze, white & black

• Models with filter change monitors are available to remind
customers when to change cartridges for water quality
assurance

• Ceramic disc for durability

• One style works for air gap and non-air gap installations

• NSF certified for material requirements

Contractor

Approval

––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

Contractor’s P.O. No.

Representative

––––––––––––––––––––––––––––––––––––––––

PURE WATER

Top mount faucets available in wide range of finishes.

––––––––––––––––––––––––––––––––––

Models with monitors are available.

Top Mount Faucet Models

Model No. FiNish iNstallatioN type tubiNg size Filter ChaNge MoNitor

PWFCTTMMCH Chrome Air gap or non air gap
PWFCTTMCH Chrome Air gap or non air gap
PWFCTTMMBN Brushed Nickel Air gap or non air gap
PWFCTTMBN Brushed Nickel Air gap or non air gap
PWFCTTMMWH White Air gap or non air gap
PWFCTTMWH White Air gap or non air gap
PWFCTTMMBK Black Air gap or non air gap
PWFCTTMBK Black Air gap or non air gap
PWFCTTMMOB Oil Rubbed Bronze Air gap or non air gap
PWFCTTMOB Oil Rubbed Bronze Air gap or non air gap

Fittings for ¼" connections available. Please inquire.

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with­out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

3

⁄8" Yes

3

⁄8" No

3

⁄8" Yes

3

⁄8" No

3

⁄8" Yes

3

⁄8" No

3

⁄8" Yes

3

⁄8" No

3

⁄8" Yes

3

⁄8" No

Installation

Install Tubing

Watts top mount faucets come with quick
connect fittings for both air gap and non­air gap installations. To start the installa­tion process, install tubing for feed water
and air gap connections, if an air gap is to
be used.

Monitor faucets eliminate
guesswork and remind
customers when cartridge
replacements are necessary
to provide top water
quality assurance!

How they work:

• Monitors track time and estimate gal­lons based on time.

• LED flashes red after six months or
after it estimates 2,000 gallons of water
have been used by the system.

• Each time cartridges are replaced a
new battery is recommended.

• New battery will reset the monitor and
LED indicator is again blue.

Battery Replacement: WTMFBAT

Certified by NSF International

against NSF/ANSI Standard 42

for material requirements.

Install Faucet

A. Place the O-ring (provided) around the

hole, drilled in the counter top.

B. Working from the top, push tubing

through the hole in the counter top;

C. Squeeze the wings of the toggle bolt

so it drops through the hole in the
counter top.

Two Faucet Types

Monitor and Standard

Secure Faucet To Counter Top

Finally, remove spout from faucet, and
tighten the Phillips head screw inside the
faucet with a Phillips head screwdriver.

The top mount faucet installation is now
complete, without the need to crawl
below the sink!

Faucet with battery operated

Filter change monitor

A Watts Water Technologies Company

ES-WQ-PWFCTTM 1225 © 2012 Watts

USA: Tel. [phone] • www.watts.com

Canada: Tel. [phone] • www.watts.ca