Watts Pump Bilge Discharge Hose User Manual

For Commercial & Residential Applications

ES-PumpHose

Job Name

Job Location

Engineer

Approval

–––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––

Contractor

Approval

Contractor’s P.O. No.

Representative

Pump & Bilge Discharge Hose

This bilge and pump hose design incorporates corrugated, ultra-low density polyethylene that allows high operating temperature stability.

Attributes

• Excellent tear strength and high impact puncture resistance

• It features molded cuffs every 3' for easy use with additional fittings

Applications

• Marine applications

• Sump Pump

• Discharge operations where no vacuum is present

WARNING: Not intended for use with

potable water.

Operating Temperature Range . . . . . 5°F (-21°C) to 150°F (66°C)

Material . . . . . . . . . . . . . . . . Low Density Polyethylene

Color . . . . . . . . . . . . . . . . . . White

––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––

Packaging

Dispenser spools

Pressure Range

O.D. I.D. WALL WORKING PRESSURE INch INch (PSI @ 70°F)

1 3/4 1/8 N/A 1-5/8 1-1/8 1/4 N/A 1-3/4 1-1/4 1/4 N/A 2 1-1/2 1/4 N/A

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca

A Watt s Water Technolo gies Company