Watts LF3003 User Manual

For Residential and Commercial Applications
ES-LF3003
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series LF3003
Dielectric Unions
Sizes: 1⁄2" – 2" (15 – 50mm)
Series LF3003 dielectric unions feature a female iron pipe thread to female brass pipe thread connections. These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. The LF3003 features Lead Free* construction to comply with Lead Free* installation requirements.
Features
•   Female iron pipe thread to female brass pipe  threaded connections
•  Designed and manufactured to the highest quality standards
•   Individually factory certified to withstand a minimum of 600 
volts on a dry line with no flashover
•  Rated to 180°F (82°C) at 250psi (17.2 bar)
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
LF3003
Standards
Meets federal specifications for tensile strength and thread end connections
Pressure — Temperature
Maximum Pressure: 250psi (17.2 bar)
Maximum Temperature: 180°F (82°C)
Specifications
A dielectric union shall be installed where indicated on the plans. The union shall feature a female iron pipe thread to female brass pipe threaded connections. The union shall be a Watts Series LF3003. The dielectric union shall be constructed using Lead Free* materials. Lead Free* dielectric unions shall comply with state codes and standards, where applicable, requiring reduced lead content.
Dimensions — Weights
B
A
Materials
Size MATeRiALS DiMeNSiONS WeiGHT
in. mm in. mm in. mm oz. gm.
1
2 15 Lead Free Brass Steel Steel Polysulfone Buna-N 15⁄8 41 21⁄4 57 8 227
3
4 20 Lead Free Brass Steel Steel Polysulfone Buna-N 17⁄8 48 21⁄4 57 11.4 323
1 25 Lead Free Brass Steel Steel Polysulfone Buna-N 2
1
4 32 Lead Free Brass Steel Malleable Iron Polysulfone Buna-N 23⁄4 70 23⁄4 70 24 680
1
1
2 40 Lead Free Brass Malleable Iron Malleable Iron Polysulfone Buna-N 31⁄2 89 23⁄4 70 48 1361
1
2 50 Lead Free Brass Malleable Iron Malleable Iron Polysulfone Buna-N 4
† Steel and malleable iron components are zinc plated
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
TAIL PIECE ADAPTER † NUT † INSULATOR GASKET** A B
1
4 57 21⁄2 64 16 454
1
8 105 31⁄8 79 69.3 1965
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
USA:  Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
ES-LF3003   1325  © 2013 Watts
A Watts Water Technologies Company
Loading...