Watts ISCA-141 User Manual

ISCA-141

Industry Standard Vertical

Tag:

Thin Wall Closet Carrier

SPECIFICATION: Watts Drainage ISCA-141 Industry Standard single vertical thin wall water closet carrier with epoxy coated cast iron fitting, no hub waste and vent connections (specify size) epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.

	15"
	(381)			Options (Select One or More)
	9"
			Suffix	Description
	(229)		-M1	ABS Extended Nipple (Up to 24")
			-M11	Tiling Frame
			-M20	Flush Valve Support
			-M23	2"(51) RH Auxiliary Inlet
			-M24	2"(51) LH Auxiliary Inlet
	7-1/2"		-3	3"(76) NH Waste, 2" (51) NH Vent
			-4-V2	4"(102) NH Waste, 2" (51) NH Vent
	(191)	1" (25)
			-4-V4	4"(102) NH Waste, 4" (102) NH Vent
		MIN
			-US	Buy American Compliant
		3" (76)
			-XH	Extra-Heavy 500lb. Carrier
		MAX
				(ASME A112.6.1M)
	17-3/4"
				with 3/4”-10” Stainless Steel Studs
	(451)
	4-1/2" (114)	Notes:
	MIN	Anchor legs to concrete floor with minimum 1/2" (13) anchor
	9-1/2" (241)	bolts (by others).
	MAX
			X = 5-3/4" (146) Maximum with Standard Nipple
			4"(102) Fitting = 2-11/16” (68)		1-1/2"
			3“ (76) Fitting = 2-3/16” (56)		(38)
		5" (127)
		2-3/32"	(53)
		9" (229)*
		MIN
		14" (356)
		MAX
		x"		5/16"
				(8)
		*8 1/2” (216) MIN. With 3” Waste

ES-WD-ISCA-141 USA 1405

ISCA-141