Watts LF223S User Manual

For Commercial, Institutional and Industrial Applications
ES-LF223
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Series LF223, LF223S
High Capacity Water Pressure Reducing Valves**
Sizes: 1⁄2" – 21⁄2" (15 – 65mm)
Series LF223 and LF223S High Capacity Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. The LF223/LF223S features Lead Free* construction to comply with Lead Free* installation requirements. This series is suitable for water supply pressures up to 300psi (20.7 bar) and may be adjusted from 25 – 75psi (172 – 517 kPa). The standard setting is 50psi (345 kPa). Series LF223 features an enlarged diaphragm, spring cage and seat orifice for high capacity performance. Series LF223S has the same options as the LF223, except it is furnished with a strainer. All parts are quickly and easily serviceable without removing the valve from the line. The optional bypass feature permits the flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main supply.
Contractor
Approval
Contractor’s P.O. No.
Representative
High temperature resisting diaphragm for hot or cold water.
Large stainless steel perforated strainer screen.
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
Available with or without separate strainer
––––––––––––––––––––––––––––––––––
LF223S
Sealed spring cage
Sensitive spring
and large dia-
phragm area for
accurate
pressure control
Features
•   Enlarged diaphragm, spring cage and seat orifice for super capacity performance
•  Lead Free* brass body construction (except 2
•   Serviceable in line
•   Series LF223S furnished with separate strainer
•   Optional bypass feature controls thermal expansion pressure***
•   Sealed spring cage on all models for accessible outdoor or pit instatllations.
1
2” (65mm) which is iron)
Models
LF223 NPT threaded female inlet x NPT threaded female outlet
LF223-S
For 21⁄2" – 3" (65 – 80mm) bronze threaded valves,
refer to literature ES-LFN223B.
For 3" (80mm) flanged connections, refer to literature ES-LFN223F.
* The wetted surface of this product contacted by consumable
* *A water saving test program concluded that reducing the supply
*** The bypass feature will not prevent the pressure relief valve from
NPT threaded female inlet with strainer x NPT threaded female outlet
water contains less than 0.25% of lead by weight.
pressure from 80-50psi (551-345 kPa) resulted in a water savings of 30%.
opening on the hot water supply system with pressure above 150psi (10.3 bar).
Lead Free*
brass body
construction
1
2" – 2"
Replaceable Disc holder removable for replacement of disc without dismantling the valve — no special tools required.
stainless seat
Specifications
A Lead Free Water Pressure Reducing Valve shall be installed on the water service pipe near its entrance to the building where supply main pressure exceeds 60psi (413 kPa) to reduce it to 50psi (345 kPa) or lower. The water pressure reducing valve shall be constructed using Lead Free* materials. Lead Free* regulators shall comply with state codes and standards, where applicable, requiring reduced lead content. Sill cocks and outside wall hydrants may be left on full main pressure at the option of the owner. Provision shall be made to permit the bypass flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main supply. Pressure reducing valves with builtin bypass check valves
and strainer will be acceptable. Approved valves shall comply with ASSE 
1003. Valve shall be a Watts Series LF223 or LF223S (with strainer).
NOTICE
Inquire with governing authorities for local installation requirements
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with­out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Materials
223
223
0 5 10 15 20
PRESSURE FALL OFF - PSI
223
Body:    1⁄2" – 2" (15 – 50mm) Lead Free* Brass 
Spring cage:  Iron Bottom plug:  Lead free brass Bottom plug gasket:  Buna-N Seat:   Stainless steel Seat gasket:  Buna-N Adjusting screw:  Steel Locking nut:  Brass Spring button:  Cast Iron Spring:  Zinc-plated wire O-Ring:  Buna-N Diaphragm plate:  Cast Iron Diaphragm:  Reinforced Buna-N Disc holder:  Lead free copper silicon alloy Nameplate:  Aluminum
1
2
2" (65mm) Cast Iron
Pressure – Temperature
Temperature Range: 33°F – 160°F (0.5°C – 71°C) Maximum Working Pressure: 300psi (20.7 bar) Adjustable Reduced Pressure Range: 25-75psi (172 – 517 kPa) Standard Reduced Pressure Setting: 50psi (345 kPa)
Standards
1
2" – 2" (15 – 50mm) meets requirements of ASSE Standard 1003; 
(ANSI A112.26); CSA Standard B356; Southern Standard Plumbing Code,  Military Standard MIL-V-18146B and listed by IAPMO.
Options
B  Builtin bypass feature
LP  Low pressure range 10-35psi (69 – 241 kPa)
HP  High pressure range, reduced range shown below:
REDUCED PRESSURE RANGE - SUFFIX HP
Size Range
in. mm psi bar
1
2 15  50-145  3.4-10.0
3
4 20  50-145  3.4-10.0
  1  25  50-145  3.4-10.0
1
4 32  50-120  3.4-8.3
1
1
2 40  50-95  3.4-6.6
1
  2  50  50-95  3.4-6.6
1
2 65  50-95  3.4-6.6
2
Dimensions — Weights
SIZE (DN) DIMENSIONS WEIGHT
A (LF223) As (LF223S) C D N (LF223S) LF223 LF223S
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
1⁄2 15 41⁄4 108  9  229  61⁄4 159  2  50  21⁄2 64 4.5 2.0 6 2.7
3
4 20 41⁄4 108  9  229  61⁄4 159  2  50  21⁄2 64  5  2.3  6.5  2.9
1 25 4
1
1
4 32 5 127 1115⁄16 287 63⁄4 172 23⁄4 70  3  76  9  4.1  12  5.4
1
1
2 40 63⁄4 171 143⁄4 375  97⁄8  251  23⁄4 70 37⁄16 87  19.5  8.8  23.5  10.7
2 50 8 203 16
1
2
2 65  9  229  201⁄8 511 103⁄4 273 33⁄8 86  5  127  32.5  14.8  59  26.8
3
4 121 1015⁄16 262 61⁄2 165 21⁄8 54 215⁄ 16 75  7  3.2  9.5  4.3
3
4 425 103⁄4 273 33⁄8 86 4 102 30 13.6 37.5 17.0
Capacity
lpm gpm
304 80
266 70
227 60
  190  50
151 40
114 30
Flow
76 20
38 10
0 0
lpm gpm
  950  250
760 200
570 150
Flow
  379  100
  190  50
0 0
N
Series LF223 sizes 1⁄2", 3⁄4", 1" (15, 20, 25mm)
1"
3
4"
1
2"
0 5 10 15 20 psi 0  34  69  103  138 kPa
Pressure Drop
Series LF223 sizes 1
0 5 10 15 20 25 30 psi 0  34  69  103  138  172  207 kPa
1
4", 11⁄2", 2", 21⁄2" (32, 40, 50, 65mm)
21⁄2"
2"
11⁄2"
1
1
4"
Pressure Drop
As
C
D
A
A Watts Water Technologies Company
ES-LF223 1412 © 2014 Watts
USA: Tel. (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel. (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Loading...