Watts ISCA-131-LR2 User Manual
ISCA-131-L/R/2
Tag:
SPECIFICATION: Watts Drainage ISCA-131-L/R Industry Standard single vertical adjustable water closet carrier with epoxy
coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, 4"(102) no hub side inlet(s), epoxy
coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports reversible inlet
cap, adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket,
plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.)
static load.
6-1/2"
(165mm)
1-1/2"
(38mm)
2-3/16" (56mm)
5-5/16"
(135mm)
11-1/2" (292mm) MIN
16-1/2" (419mm) MAX.
2-3/32" (76mm)
"X"
5/16"
(8mm)
ABS NIPPLE
W/INTEGRAL
TEST CAP
Note: Extended nipple (-M1) option cannot be used with –XH carriers.
5"
(127mm)
3-1/2"
(89mm)
2"
(51mm)
REVERSIBLE
INLET CAP
ASTM C564
COMPRESSION
GASKET
7-1/2"
(191)
17-3/4"
(451)
4-1/2" MIN.
(114 MIN.)
9-1/2" MAX.
(241 MAX.)
5" (127) MIN.
9" (229) MAX.
Single Vertical Adjustable
Closet Carrier w/Side Inlet(s)
Options (Select One or More)
Suffix
-36
CA-100-EXT
-HS Hub & Spigot Connections
-M1
-M11
-M20
-US Buy American Compliant
-XH
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" anchor
bolts (by others).
For –XH option, rear anchor support must be used.
X = 5-3/4" (146) Maximum with Standard Nipple
15" (381)
Description
36" Long Barrel Fitting
Aux. Support System w/Extended Nipple
ABS Extended Nipple (Up to 24")
Tiling Frame
Flush Valve Support
Extra Heavy 500lbs. Carrier
(ASME A112.6.1M) with 3/4”-10
Stainless Steel Studs
9" (229)
1-3/4" (44) MIN.
5-3/4" (146) MAX.
DUAL SLOTTED
LEGS
REMOVABLE LUGS
FOR SHALLOW ROUGH-IN
FACEPLATE
ASSEMBLY
W/COMPRESSION
SEAL
12-1/2"
(318)
Industry Standard
NO HUB FITTING
ES-WD-ISCA-131-LR-2 USA 1344 ISCA-131-L/R/2
Loading...