Watts ISCA-131-D User Manual

ISCA-131-D
Tag:
SPECIFICATION: Watts Drainage Products ISCA-131-D Industry Standard back-to-back vertical adjustable water closet
carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, 4"(102) no hub side inlet(s), epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.
Back-To-Back Vertical Adj.
Closet Carrier w/Side Inlet
6-1/2" (165)
5/16"
(8)
5/16" (8)
"X"
2-3/32 (53)
10-5/8" (270)
2-3/32 (53)
"X"
CAP FOR UNUSED INLET
15-1/2" (394) MIN.
25-1/2" (648) MAX.
7-1/2"
Options (Select One or More)
Suffix
CA-100-EXT
-HS
-M1
-M11
-M20
-US Buy American Compliant
-XH
Notes: Siphon jet (4 bolt) arrangement shown. Invert faceplate assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" (13) anchor bolts (by others).
Description
Aux. Support System w/Extended Nipple
Hub&SpigotConnections
ABS Extended Nipple (Up to 24") Tiling Frame Flush Valve Support
Extra-Heavy 500lb. Carrier (ASME A112.6.1M) with 3/4" - 10" Stainless Steel Studs
X = 5-3/4" (146) Maximum with Standard Nipple
15" (381)
9" (229)
(191)
(451)
17-3/4"
MIN.
MAX.
4-1/2" (114)
9-1/2" (241)
5" (127) MIN. 9" (229) MAX.
ES-WD-ISCA-131-D USA 1343 ISCA-131-D
1-3/4" (44) MIN. 5-3/4" (146) MAX.
(314)
12-1/2"
Loading...