Watts ISCA-101-LR-AUX User Manual

ISCA-101-L/R-AUX

Tag:

Industry Standard Single

Horizontal Adjustable Closet

Carrier w/Aux Inlet

SPECIFICATION: Watts Drainage Products ISCA-101-L/R-AUX Industry Standard single horizontal adjustable water closet

carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, 2" 1/8 bend auxillary
inlet, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports
adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket,
plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.)
static load.

1" (25)

2-3/16" (56)

5-5/16"

(135)

2-3/32" (53)

"X"

2-3/4" (70)

5/16" (8)

6" (152)

10-1/4" (260)

Options (Select One or More)

Suffix

CA-100-EXT

-HS

-M1

-M11

-M20

-XH

Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.

Anchor legs to concrete floor with minimum 1/2" (13) lag
bolts (by others).

X = 5-3/4" (146) Maximum with Standard Nipple

Description

Aux. Support System w/Extended Nipple

Hub&SpigotConnections

ABS Extended Nipple (Up to 24")
Tiling Frame
Flush Valve Support
Extra-Heavy 500lb. Carrier (ASME A112.6.1M)

with 3/4" - 10" Stainless Steel Studs

15" (381)

9" (229)

(191)

7-1/2"

0" MIN.

4" (102) MAX.

Note:
Left hand carrier shown; right hand carrier is mirror image.

ES-WD-ISCA-101-LR-AUX USA 1343 ISCA-101-L/R-AUX

(451)

17-3/4"

4-7/8" (124)

MIN.

MAX.

9-1/2" (241)