Watts ISCA-101-LR User Manual

ISCA-101-L/R
Tag:
Industry Standard
Adjustable Closet Carrier
SPECIFICATION: Watts Drainage Products ISCA-101-L/R Industry Standard single horizontal adjustable water closet
carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb.(136 kg.) static load.
2-3/4" (70)
1-1/2" (38)
2-3/16" (56)
5-5/16"
(135)
2-3/32" (53)
11-1/2" (292mm) MIN
16-1/2" (419mm) MAX
X"
5/16"
(8)
6" (152)
10-1/4" (260)
Options (Select One or More)
Suffix
-36
CA-100-EXT
-HS
-M1
-M11
-M20
-US Buy American Compliant
-XH
Notes: Siphon jet (4 bolt) arrangement shown. Invert faceplate assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" (13) anchor bolts (by others).
Description
36" Long Barrel Fitting Aux. Support System w/Extended Nipple Hub & Spigot Connection ABS Extended Nipple (Up to 24") Tiling Frame Flush Valve Support
Extra-Heavy 500lb. Carrier (ASME A112.6.1M) with 3/4" - 10" Stainless Steel Studs
X = 5-3/4" (146) Maximum with Standard Nipple
15" (381)
9" (229)
(191)
7-1/2"
0" MIN
4" (102) MAX
Note: Left hand carrier shown; right hand carrier is mirror image.
ES-WD-ISCA-101-LR USA 1342 ISCA-101-L/R
(451)
17-3/4"
4-7/8" (124)
MIN
MAX
9-1/2"(241)
Loading...