Watts ISCA-101-D User Manual

ISCA-101-D

Tag:

SPECIFICATION: Watts Drainage ISCA-101-D Industry Standard back-to-back horizontal adjustable water closet carrier with

epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron patent
pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair
height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts.
Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.

Back-To-Back Horizontal
Adjustable Closet Carrier

Industry Standard

ASTM C564
COMPRESSION
GASKET

5/16" (8mm)

X

2-3/32" (53mm)

10-5/8" (270mm)

2-3/32" (53mm)

X

Suffix

-36

CA-100-EXT

-HS Hub & Spigot Connections

-M1-M1

-M11

-M20

-US Buy American Compliant

-XH

Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.

15-1/2" (394mm) MIN

25-1/2" (648mm) MAX

Anchor legs to concrete floor with minimum 1/2" anchor
bolts (by others).

X = 5-3/4" (146mm) Maximum with Standard Nipple

Options (Select One or More)

Description

36" Long Barrel Fitting
Aux. Support System w/Extended Nipple

ABS Extended Nipple (Up to 24")
Tiling Frame
Flush Valve Support

Extra Heavy 500lbs. Carrier
(ASME A112.6.1M) with 3/4”-10
Stainless Steel Studs

15" (381mm)

9" (229mm)

0" (0mm) MIN

4" (102mm) MAX

2-3/4"

(70mm)

ABS NIPPLE
W/INTEGRAL
TEST CAP

6"

(152mm)

10-1/4"

(260mm)

5/16" (8mm)

7-1/2"

(191mm)

17-3/4" (451mm)

Note: Extended nipple (-M1) option cannot be used with –XH carriers.

4-7/8" (124mm) MIN

9-1/2" (241mm) MAX

ES-WD-ISCA-101-D USA 1342 ISCA-101-D