Watlow EZ-ZONE PM Quick Start Guide

QUICK START GUIDE

Identify a Bluetooth®-Enabled Unit (P/N or Display)

Connect to a Controller with the App

Turn Bluetooth® On/Off in the Controller

1.

1.

2.3.4.

5.

2.

3.

APP for

1.

For Part Numbers:
PM6_ _ _ _ -(B,E,F,G,H,J,K,)_ _ _ _ _ _ _

For assistance contact Watlow: www.watlow.com

1-800-WATLOW2 (1-800-928-5692)

[e-mail]

1952-8909 Rev B

WATLOW EZ-ZONE

68

Z
O
N

75

1

E

WATLOW EZ-ZONE

Z
O
N

1

E

WATLOW EZ-ZONE

Z
O
N

1

E

°F

WATLOW EZ-ZONE

Z
O
N

1

E

http://www.watlow.com/EZLINK

WATLOW EZ-ZONE

Z
O
N

1

E

PM Express

WATLOW EZ-ZONE

Z
O
N

1

E

WATLOW EZ-ZONE

Z
O
N

1

E

March 2018

Starting at the Home Page:

To enter the setup page press and

1.

hold and until appears in
lower display.
( will appear for PM Express)

Press several times until

2.

appears in the upper display.

(skip this step for PM Express)

To enter the global menu press .

3.

(skip this step for PM Express)

Press several times until

4.

appears in the lower display.

Press to turn Bluetooth® or

5.

.

To exit the setup page press or

6.

RESET

twice.

PM 6 _ _ _ _ -B _ _ _ _ _ _ _

WATLOW EZ-ZONE

Z
O
N

1

E

3.2.

74%

10:58 AM

74%

10:58 AM

Choose a device to connect, or ping to locate

1 EZ-ZONE PM

This mobile application simplifies setting up and
monitoring Watlow EZ-ZONE PM controllers that
are equipped with Bluetooth communications by
making it easier to navigate the menu structure
and presenting the full names of parameters and
settings and descriptions for each parameter.

• The EZ-LINK app supports:

• Browsing and editing settings on the
controller’s home and setup pages

• Monitoring and displaying alarms and errors

• Limiting access according to the EZ-ZONE
PM’s password protection settings

2 OVEN 2

Contact Us

For technical assistance contact your
or Watlow. Phone support hours are
5 p.m. USA Central Time.

Note:

When more than one controller is installed nearby, use
the device view in the app to give each controller a
unique name to make it easy to find the right one.

PING

PING

PING

PINGING DEVICE

1 EZ-ZONE PM

The device is being pinged. Look for

the device with the ping animation

as pictured above.

CONNECT

DONE

The EZ-ZONE® PM controller or
limit controller includes Bluetooth®
wireless technology when:

• Part number includes one of

the following designations:
B,E,F,G,H,J or K

• The display indicates is

or as shown at the left
when you turn power on to the
EZ-ZONE PM immediately after
displaying the firmware version.

Note:

If Bluetooth

®

is off, see section 2

to turn it on.

1.

Download EZ-LINK™
from the app store for
your mobile device and
open it.

74%

10:58 AM

2. If more than one

controller is in range,
tap one of the PING
buttons to identify the
controllers. Otherwise
tap the name of the
controller to connect.

3. If the controller

displaying the pinging
animation is the one you
want, tap CONNECT.
Otherwise, tap DONE
and try another.

4.

Limiting EZ-LINK™ User’s Access

Compliance Information

FCC Compliance

Use the EZ-ZONE PM
controller’s security lock
features to determine
which parameters users
can access.

To allow user’s to read but not change parameters:

• On the controller’s factory page, in the lock menu,

set the write security parameter to zero (0).

To prevent user’s from accessing the Setup Page via
the All Parameters link in the app:

• On the controller’s factory page, in the lock menu,

change the password enable to on and set the
locked access level to three (3) or less.

To change which parameters are listed on the
controller’s home page and on the dashboard in
EZ-LINK:

• On the controller’s factory page, in the custom

setup menu, select the parameters you want to
appear for as many of the custom setup menu
options (1 to 20) as needed.

• Set unneeded menus to None.

Hints:

• The settings discussed above affect

both the EZ-ZONE PM’s built-in user
interface and the EZ-LINK app.

• When password protection is

enabled, the password must be
entered via the EZ-ZONE PM’s built­in user interface or using Watlow
COMPOSER® software in order to
access the protected items.

• Change and make note of the user

and administrator passwords so that
you can access these features via the
controller’s user interface or Watlow
COMPOSER software in the future.

• COMPOSER software offers an

easier-to-use and more flexible way
to edit what is listed on the EZ-ZONE
PM controller’s home page.

Access to
setup page

Custom
home page
parameters

Connected Device

1 EZ-ZONE PM

All Parameters

250°F

Active Process

Value

Auto

Control Mode

No

Control Mode

74%

250°F

Active Set Point

0.0%

Heat Power

0.0%

Heat Power

10:58 AM

ContactDeviceAlertsDashboard

The transmitter module is mounted on the top of the display PC board partially under the LED display
module and is visible when display removed from bezel.

Module FCC ID: VPYLBZY Part 15C 2.

Unit is assembled from tested components, complete system not tested.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help

Bluetooth® Enabled Product

Models PM6_ _ _ _ _-(B,E,F,G,H,J or K)_ _ _ _ _ _ _ contain an embedded Bluetooth® module.
Output Power: Frequency Range 2402.0 MHz - 2480.0 MHz Output Power 0.001 Watts
Antenna Gain: -0.6 dBi PCB antenna

Industry Canada

Contains IC: 772C-LBZY
Specification: RSS210

Japan

Japanese Radio Law

Type Certification

R 001-P00500

CE See current Declaration of Conformity for full details.

2014/53/EU Radio Equipment Directive (RED)

EN 61010-1:2010 Article 3.1(a) Safety Requirements
EN 61326-1:2013 EMC requirements (Industrial Immunity, Class A Emissions).
EN 301 489-1 V2.1.1 Article 3.1(b)
EN 301 489-17 V3.1.1 Article 3.1(b)
EN 300 328 V1.9.1 Article 3.2 of the R&TTE Directive
EN 300 328 V2.1.1 Additional receiver blocking test to cover requirements for 2014/53/EU

Bluetooth® Declaration ID 38479
Controls are Class A industrial emissions. Not for use in commercial or residential application without further filtering.