Wasp Bar Code WDT3250 RF User Manual
WDT3250 RF
Setup Guide
© 2008 Wasp Technologies
Wasp Technologies - WDT3250 RF Setup Guide
Table of Contents
Overview ..........................................................................................................................................................................1
Using the Summit Client Utility Software .........................................................................................................................2
Main Window ...............................................................................................................................................................2
Profile Window .............................................................................................................................................................3
Status Window .............................................................................................................................................................5
Diags Window ..............................................................................................................................................................6
Global Window.............................................................................................................................................................6
i
Wasp Technologies - WDT3250 RF Setup Guide
Overview
Thank you for choosing one of the following
products:
• SDC-CF10G compact flash radio module with
antenna connectors
• SDC-CF20G compact flash radio card with
integrated antennas
• SDC-PC10G PCMCIA radio module with
antenna connectors
• SDC-PC20G PCMCIA radio card with
integrated antennas
(If you are using the SDC-MCF10G miniature
compact flash radio module with antenna
connectors, contact Wasp for hardware
installation information and assistance. The
software is the same as for other Summit
products.)
When you install and use your Summit radio
module or card in a computing device, that
device can communicate to a computing network
using the IEEE 802.11g and IEEE 802.11b
protocols.
The software provided for these radio modules
runs on the computing device (your PC, for
example)that houses the module.
includes:
• A device driver
• An integrated IEEE 802.1X supplicant, which
supports the highest level of standards-based
WLAN
security with a broad range of options
• The Summit Client Utility (SCU), a configuration, monitoring, and management application designed
for Summit radio modules
• On Windows CE/Mobile, a service that displays a Windows System Tray icon that provides a visual
status for the Summit radio and enables the user to launch SCU by tapping the icon
This software runs on the following operating systems:
• Windows CE .NET 4.2 and Windows Mobile (or Pocket PC) 2003
• Windows CE .NET 5.0 and Windows Mobile 5.0 and 6.0
• Windows XP and Windows XP Embedded (XPe)
Your Summit radio module is Wi-Fi CERTIFIED
• Wi-Fi: The Wi-Fi Alliance certifies that Summit radio modules support 802.11b and 802.11g with
WPA and WPA2, both Personal and Enterprise. The tested EAP type was PEAP-MSCHAPv2. For
details, visit the Wi-Fi Alliance Web site at http://www.wi-fi.com
Products” link, and search for Summit Data Communications.
• CCX: Summit radio modules are certified to Version 3 of the CCX specification for applicationspecific devices (ASDs). For an overview of CCX, go to
http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_concept_home.html
the features in CCX V3 for ASDs, go to
http://www.cisco.com/warp/public/765/ccx/versions_and_features.shtml
That software
®
and certified for Cisco Compatible Extensions (CCX):
1
SDC-PC10G SDC-PC20G
SDC-CF10G SDC-CF20G
, click on the “Wi-Fi CERTIFIED
. For details on
.
®
Loading...