Warwick Blue Cab 60, Blue Cab 15, Blue Cab 30 User Manual

OFFICIAL WARWICK

AMP OWNER MANUAL

BLUE CAB 15 - BLUE CAB 30 - BLUE CAB 60

EENNGGLLIISSHH

Getting started 6

Blue Cab 15 7
Blue Cab 30 8
Blue Cab 60 9

Suffix

Technical Data 10

Schematic Diagrams

Blue Cab 15 11
Blue Cab 30 12
Blue Cab 60 13

IINNDDEEXX

Congratulations on the purchase of your new Warwick combo. Please read through these instructions be­fore connecting and operating the device. Following the guidelines you will soon will benefit from your new
Warwick amplifier. Please keep this instruction booklet handy in case you need to consult it again. Please
send the PASSPORT to the address indicated therein.

4

EENNGGLLIISSHH

SAFETY HINTS

- Please read these instructions

- Please heed all warnings

Caution: To reduce the risk of electric shock, do
not open the amplifier’s case. Avoid exposure to
rain or moisture. No user serviceable parts inside,
refer all service to a qualified technician. No ves­sel filled with liquids, such as vases shall be pla­ced on top of the unit.

This symbol, wherever it appears, alerts you to
the presence of dangerous non-insulated voltage
inside the case. Risk of electric shock!

This symbol, wherever it appears, indicates to
important operating and maintenance instruct­ions in this user manual. Please read the manual.

This recycling logo informs the end user that it is
forbidden to throw away the product in the trash.
It has to be disposed of accordingly.

Weee-Nr.: DE93670540

CB Approved

!

5

EENNGGLLIISSHH

GENERAL INFORMATION

For safe and reliable operation please follow these instructions:

•DO NOT open the amplifier case! You might receive an electrical shock. For any repair refer to qualified service personnel.

•Avoid dust, excessive moisture, direct sunlight and extremely high or low temperatures.

•Safeguard the device from impact. Always place the unit on a stable and horizontal surface.

•Do not block any of the ventilation openings.

•Avoid leaving the unit near radiators or other heat producing devices.

•Internal components should be adjusted or cleaned by qualified service technicians only. Make sure no object or liquid pene­trates the device through its cooling vents.

•Fuse must be replaced with one of the same type and value to avoid damaging the amplifier.

•the mains cable or mains switch have been damaged,

•objects or liquids have penetrated the device,

•it has been exposed to excessive moisture,

•malfunctions or abnormal operating conditions have occurred,

•the device has been dropped or the case has been damaged.

Have the device examined by a qualified service technician in the following cases:

- Make sure the unit is plugged into a socket outlet with a protective grounding connection.

- Mains plug must be accessible at any time to disconnect it from mains in case of abnormal operation.

- If the device shows any malfunction, immediately disconnect the mains cable from the mains socket.

- Use effects pedals only between the instrument and the amplifier since these devices do not meet the electrical specifications
of the effects loop.

- Unplug the unit whenever changing a fuse.

- Replace fuse only with one of the same type and value. Never bridge defective fuses.