Waring MX1000R User Manual

Half Gallon

Hi-Power Blender

MX1000R

INSTRUCTION BOOKLET

IMPORTANT UNPACKING

INSTRUCTIONS

1. Place the box containing your Waring Pro® blender on a flat sturdy surface
before unpacking.

2. Open corrugated flaps.

3. Remove Instruction Book and any printed materials from top of box.

4. Pull up corrugated material and remove. Remove jar and padding.

CAUTION: Sharp blade inside blender jar.

5. Remove corrugated insert. Remove blender base from box and set aside.

6. Replace all corrugated inserts in the gift box and save the box for repacking.

REPACKING INSTRUCTIONS

1. Place blender on a large, sturdy flat surface.

2. Carefully place blender base in bottom of box.

3. Place long corrugated insert over base.

4. Insert blender jar and padding.

5. Close and seal box for shipping.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be
followed including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against electrical hazards, do not immerse the blender base
in water or other liquid.

3. Close supervision is necessary when any appliance is used by or
near children.

4. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.

5. Avoid contacting moving parts.

6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility for examination,
repair, or electrical or mechanical adjustment.

7. The use of attachments, including canning jars, not recommended by the
appliance manufacturer may cause hazards.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

10. Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and/or damage to the blender.
A rubber scraper may be used, but must be used only when the blender
is not running.

11. Blades are sharp. Handle carefully.

12. Always operate blender with cover in place.

13. When blending hot liquids, remove center piece of two-piece cover.
See Hot Blending Instructions.

14. The use of ear protection is recommended during extended
operating periods.

®

15. See Cleaning and Sanitizing Instructions for all Waring Pro
FOR WATERJET CLEANING.

Blenders. NOT

SAVE THESE INSTRUCTIONS

MX1000R (Model: MXMPBKP6

BLENDER SPECIFICATIONS

• Capacity: 64 oz working capacity

• Switch Settings: (2 Speeds) Hi Low Pulse

• Speed (RPMs) 30,000 26,000 30,000

• Rating: 120 Volts - 12.0 Amps

• Base Material: Polycarbonate

• Bearing: High Precision Ball Bearing

• Cord: 6 foot three-conductor ground cord with strain relief in base

• Overall Height: 19 inches

• Weight: 15 lbs

• UL, CUL, NSF listed

• Operating Cycle: 1 min. ON /3 min. OFF

)