Waring JEX328 User Manual
Model JEX328
JUICE EXTRACTOR
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
CONTENTS
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Important Unpacking Instructions . . . . . . . . . . . . . . . . . . .3
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
A Unique Nutritional Experience . . . . . . . . . . . . . . . . . . . .4
Using the Juice Extractor . . . . . . . . . . . . . . . . . . . . . . . . . .5
Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . .5
Important Facts You Should Know About
Your Waring Pro
®
Juice Extractor . . . . . . . . . . . . . . . . . . . .6
Most Popular Juices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Suggestions for Juice Combinations . . . . . . . . . . . . . . . . .8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
IMPORTANT: Always unplug the Waring Pro
®
Juice Extractor from outlet when disassembling
and assembling.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following.
1.
READ ALL INSTRUCTIONS:
2. To protect against risk of electrical shock, do not
immerse the Waring Pro®Juice Extractor base
housing in water or other liquid.
3. Close supervision is necessary when any appliance is
used by or near children.
4. Unplug from outlet when not in use, before putting on
or taking off parts and before cleaning.
5. Avoid contact with moving parts.
6. Do not operate the Waring Pro
®
Juice Extractor or any
other electrical equipment with a damaged cord or
plug, which must be replaced by the nearest authorized
service facility for examination, repair or adjustment in
order to avoid a hazard. If the unit malfunctions or is
dropped, return it to the nearest authorized service
1
facility for examination, repair, or adjustment.
7. Do not operate the Waring Pro
®
Juice Extractor if the
strainer basket is damaged.
8. The use of any attachments not recommended or sold
by Waring may cause fire, electric shock, or injury.
9. Do not let power cord hang over edge of table or
counter, or touch hot surfaces.
10. Always make sure the Waring Pro
®
Juice Extractor
cover is secure before motor is turned on. If cover is
not secure, safety interlock will not
turn on. Do not
loosen cover while the Waring Pro®Juice Extractor
is in operation.
11. Be sure to turn switch to OFF position and unplug
from outlet after each use of your Waring Pro
®
Juice Extractor. Make sure the motor stops completely
before disassembling.
12. Never put your fingers or other objects into the
Waring Pro
®
Juice Extractor Feed Chute while
it is in operation. If food becomes lodged in opening,
use pusher or another piece of fruit or vegetable to
push food down. When this method is not possible,
turn the switch off, unplug from outlet and disassemble
the Waring Pro
®
Juice Extractor to remove the
remaining food.
13. Do not use outdoors.
14. Do not use unit for other than intended use.
This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will
fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any
way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2
IMPORTANT UNPACKING INSTRUCTIONS
Remove your new Waring Pro® Juice Extractor from the
box. With the unit facing you, unlock cover by turning
cover clockwise.
• Remove cover and take out any packaging material
used to protect the shredder disc (Part #3).
• Lift and remove strainer basket (Part #3).
• Unlock and remove pulp collector (Part #4) by turning it
clockwise, then remove.
ASSEMBLY
• Fit the pulp collector bowl (4) on top of the motor
housing (5) and lock into place.
• Place strainer basket with shredder disk (3) inside pulp
collector (4) over drive coupling.
• Place cover and feed tube (2) over pulp collector bowl
(4) with the nose just left of the juice spout.
• Lock cover and feed tube (2) by twisting
counterclockwise until it snaps shut and the nose lines up
with the juice spout.
PAR TS
1. Pusher
2. Feed tube and cover
3. Strainer basket with
shredder disk
4. Pulp collector with juice spout
5. Motor housing
6. Power switch
7. 32 oz. Stainless steel
juice collector cup
8. Cleaning brush for
strainer basket
3
7.
6.
5.
1.
2.
3.
4.
8.
Loading...