Item #: WQ52C4DR
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 09/2010
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The four main types of hardware used to assemble this product are: wood dowels,
cam bolts and locks, bolts and screws.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
P.2
Hardware List
Wood dowel
Cam bolt
Cam lock
Door stopper
Door stopper
Medium screw
Large bolt
Handle
Small bolt
Door stopper plate
W
Small screw
Plastic pivot
Standard door hinge
Extra-large screw
Door hinge
Door hinge
Shelf support pin
Plastic wedge
Large screw
Wrench
Glue tube
*
*Stickers (X) can be used to cover all visible cam locks after the stand is assembled.
Sticker
Screw cam bolts (B) into top panel (1). Attach door stoppers (D,E) to top panel (1) usng medium
screw (F).
Attach legs (14) to bottom panel (2) using large bolts (G) and wrench (V). Insert dowels (A) into slats
(11,12,13). Screw cam bolts (B) into slat (11).