Walker W52C4CTBL User Manual

Item #: W52C4CT

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 07/2012

General Assembly Guidelines

I. Ensure that all parts and hardware are available before beginning assembly.

II. Follow each step carefully to ensure the proper assembly of this product.

III. Two people are recommended for ease in the assembly of this product.

IV. The main types of hardware used to assemble this product are wood dowels, cam bolts
and locks, bolts and screws.

V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate
the appropriate hole for the dowel, place a small amount of glue in the hole and insert the
dowel. Wipe away excess glue immediately.

In future assembly steps when dowels are necessary to attach assembly parts together,
place a small amount of glue on the end of the dowel before attaching parts together.
Wipe away excess glue immediately.

VI. A Phillips head screwdriver is required for the assembly of this product.

VII. Power tools should not be used to assemble this product.

VIII. The hinges of this product can be adjusted three ways:

Horizontal

Forward and Back Vertical

P.2

Parts List

Hardware List

Wood dowel

Wood dowel

Handle

Drawer stopper

Insert dowels (A) into side panels (1,2). Screw cam bolts (C) into side panels (1,2).

Screw cam bolts (C) into top panel (10).

Insert dowels (B) into panels (7,8) and slats (3,9). Insert dowels (A) into slat (3). Attach drawer stopper (M) to
slat (9) using screw (P).

Insert dowels (A) into slats (6,23). Insert dowels (B) into panel (4) and slat (23). Screw cam bolts (D) into
panel (4), drawer fronts (17) and slat (6).

Attach slats (6,23) to panel (4) using cam bolts and dowels as guides.

Insert cam locks (E) into panel (4) and slat (23) and tighten with a screwdriver. This will secure slats (6,23) to

panel (4).