Wacom Co PTZL Users manual
U
ING
S
P
N
E
M
OUSE
A
T
BLET
C
STOMIZING
U
P
EN
M
OUSE
T
BLET
A
P
P
-
P
M
O
U
A
PLICATION
P
T
ROUBLESHOOTING
A
PENDIX
P
O
C
NTENTS
NU
E
-S
ECIFIC
S
P
TTINGS
E
I
NDEX
1
User’s Manual for Windows & Macintosh
®®
O
C
NTENTS
N
I
DEX
1
2
Wacom Intuos
®
3 User’s Manual for Windows
C
ONTENTS
®
& Macintosh
I
DEX
N
®
English version 2.0, August 26, 2005
Copyright © WACOM Company, Limited, 2005
All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves
the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to
provide current and accurate information in this manual. However, Wacom reserves the right to change any
specifications and product configurations at its discretion, without prior notice and without obligation to include such
changes in this manual.
Reuse, recycling, and recovery. You are urged to recycle this product when replacing it with a newer
product or when it has outlived its useful life by bringing it to an appropriate collection point for recyclable materials in
your community or region. By doing this, you can help improve the environment of your community as well as minimize
the potential negative effects created should any hazardous substance that may possibly be present within waste
material reach the environment during the disposal process.
Within the European Union, users are required not to dispose of Waste Electrical and Electronic Equipment (WEEE)
as unsorted municipal waste, according to the Directive 2002/96/EC of the European Parliament and of the Council of
27 January 2003, or the corresponding local laws of the Member States. Products for which this is applicable will be
marked with the WEEE symbol shown at the beginning of this note unless this is not feasible because of the size or the
function of the product. Wacom products are subject to the Directive 2002/96/EC and therefore you should always
collect them separately and bring them to the appropriate collection point in your community or region.
Watch for the Penabled logo to ensure you
are getting the natural feel and superior
performance of Wacom’s patented cordless
and battery-free pen technology.
Tool ID, QuickPoint, and DuoSwitch are trademarks, and Intuos, Penabled, and Wacom are registered trademarks of
WACOM Company, Limited.
Adobe, Reader, and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries. Microsoft and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Apple, the Apple logo, and Macintosh are registered
trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Any additional company and product
names mentioned in this documentation may be trademarked and/or registered as trademarks. Mention of third-party
products is for information purposes only and constitutes neither an endorsement nor a recommendation. Wacom
assumes no responsibility with regard to the performance or use of these products.
ExpressKey is a registered trademark of Ginsan Industries, Inc., and is used with permission.
O
C
NTENTS
N
I
DEX
2
O
C
NTENTS
CONTENTS
About the manual 5
Navigating the manual 6
WORKING WITH INTUOS3 7
Intuos3 tablet features 8
Intuos3 input tools 9
Intuos3 optional tools 10
Setting up your work area 11
Using the Grip Pen 12
Holding the pen 12
Pointing 13
Clicking 14
Dragging 14
Using the side switch 15
Drawing with pressure-sensitivity 16
Drawing with tilt 16
Erasing 17
Eye-hand coordination exercise 18
Using the mouse 19
Using the Airbrush and Art Pen 20
Working with the tablet 21
Using ExpressKeys 22
Using the Touch Strips 23
CUSTOMIZING 24
Opening the control panel 24
Control panel overview 25
Control panel settings 26
Customizing the pen 27
Adjusting tip feel and double-click 28
Adjusting eraser feel 29
Advanced tip and eraser pressure settings 30
Customizing tool buttons 31
Button functions 32
Customizing tilt sensitivity
35
I
NDEX
Customizing the mouse
3
36
Customizing mouse buttons 36
Customizing the mouse fingerwheel 37
Tablet to screen mapping 38
Pen mode 38
Mouse mode 39
Orientation 39
Screen area 40
Force proportions 41
Tablet area 42
Mapping to multiple monitors 43
Customizing the tablet functions 44
Customizing ExpressKeys 45
Customizing tablet Touch Strips 46
Advanced Touch Strip settings 49
Customizing the Pop-up Menu 50
Working with multiple tools 51
Working with application-specific settings 52
Creating an application-specific setting 53
Changing settings for a specific tool
and application 54
Removing application-specific settings 54
TROUBLESHOOTING 55
Testing your tablet 56
Testing your tools 57
Testing the ExpressKeys 58
Testing the tablet Touch Strips 58
Testing a pen 59
Testing a mouse 60
Troubleshooting tables 61
General problems 61
Windows-specific problems 64
Macintosh-specific problems 64
O
C
NTENTS
N
I
DEX
3
C
ONTENTS
O
C
NTENTS
Technical support options 65
Obtaining driver downloads 66
APPENDIX 67
Caring for your tablet and tools 67
Replacing the pen tip 68
Uninstalling the softw
Changing the tab
are 68
let mode 69
Installing multiple tablets 69
Intuos3 lens cursor 70
Customizing the lens cursor 71
Testing the lens cursor 71
Working with AutoCAD 72
Configuring AutoCAD for a Wintab
compatible digitizer 72
Configuring tablet menus and screen pointing
areas in AutoCAD 73
Calibrating Intuos3 for AutoCAD 74
Product specifications 75
General specifications for all Intuos3 tablets 75
Intuos3 4x5 / A6 tablet (model PTZ-430) 75
Intuos3 6x8 / A5 tablet (model PTZ-630) 75
Intuos3 6x11 / A5 Wide tablet
(model PTZ-631W) 75
Intuos3 9x12 / A4-regular tablet
(model PTZ-930) 76
Intuos3 12x12 / A4 Oversize tablet
(model PTZ-1230) 76
Intuos3 12x19 / A3 Wide tablet
(model PTZ-1231W) 76
Intuos3 Grip Pen (model ZP-501E) 76
Intuos3 mouse (model ZC-100) 76
Intuos3 Airbrush (model ZP-400E) 76
Intuos3 Ink Pen (model ZP-130) 77
Intuos3 Art Pen (model ZP-600) 77
Intuos3 Classic Pen (model ZP-300E) 77
Intuos3 lens cursor (model ZC-210) 77
I
NDEX
4
Product information 78
Ordering parts and accessories 78
Other parts and accessories 80
Radio and television interference 81
FCC notice 81
CE declar
License and
ation 81
Warranties
(Worldwide, Except for Europe, Africa
and Middle East) 82
Software License 82
Limited Warranty (U.S.A. and Canada) 82
Warranty Service in the U.S.A. and Canada 83
Warranty on Sales Outside of U.S.A.
and Canada 84
License and Warranty
(Europe, Africa and Middle East) 85
Software License Agreement 85
Entitlement to Use the Software 85
Limited Warranty 85
GLOSSARY 87
INDEX 89
O
C
NTENTS
N
I
DEX
4
C
ONTENTS
I
DEX
N
5
About the manual
This interactive User’s Manual provides quick access to information about Intuos3. Just click on a navigation
button or highlighted word to move through the document. The information is common to Windows and
Macintosh computers, and Windows screen captures are shown unless otherwise noted.
• In the contents
• Working with Intuos3 is the learning chapter, and introduces you to the many capabilities of your Intuos3
pen tablet. It describes the various tablet models, the features and functions of each Intuos3 tool, and
includes exercises for new users.
• Customizing
and tools for the way you like to work.
• Want to test your tablet and tools? Need troubleshooting guidelines? T
find the answers to most common questions.
• The appendix
uninstalling the software, your license and warranty, and more. Also included are tips on working with
AutoCAD. If you are using more than one tablet on your computer, you will find instructions on adding
and working with multiple tablets.
Note: This manual does not contain information on installing your tablet. Please refer to your product Quick
Start Guide and to the automated software installer (located on the Wacom Tablet CD) for details on
installing your Wacom tablet.
If you are new to electronic documentation, be sure to read na
Here are some other points to keep in mind:
• The tablet size descriptions shown within this manual reflect usage for both the USA and European
markets, and are separated by a “/ “. For example, in the descriptor “4x5 / A6”, “4x5” is the tablet sizing
descriptor for markets in the USA. “A6” is the descriptor for European markets. Within this manual, USA
tablet size descriptors are always shown before the “/ “.
MALL
•S
CAPITAL
options.
• Remember that you can always use the Adobe Reader zoom-in tool to increase the size of the manual
on your display screen.
• The following kinds of information are not included with this product: information about your specific
computer hardware or operating system, or information about your application software. Your best
source for this information is the set of manuals and disks that came with your hardware, operating
system, or application.
• Many graphics applications have built-in support for Intuos3 features (such as pressure-sensitivity, tilt,
airbrush simulation, and fingerwheel input for the Intuos3 mouse). You can find a listing of applications
that support these features at Wacom’s web site (see product inf
to use Intuos3 features within a specific application, refer to the instructions in that application’s
manuals.
you can go directly to a topic by clicking on it.
describes how you can change the control panel settings to optimize your Intuos3 tablet
roubleshooting is where you will
includes a variety of information: tips on caring for your tablet and tools, a how-to on
vigating the manual.
LETTERS
are used to identify the names of keyboard keys, dialog boxes, and control panel
ormation). For information on how best
O
C
NTENTS
N
I
DEX
5
C
ONTENTS
Navigating the manual
Use the navigation controls to move through the manual:
Go to front page.
CONTENTS
INDEX
HEADING TEXT
topic
Go to table of contents.
Go to index.
Go back to previous view.
Page back, or page forward.
Go to beginning of section.
Go to topic.
Topic continued.
I
DEX
N
6
Adobe Reader provides you with additional tools for using and printing the manual. Refer to the Adobe
Reader help for more information.
O
C
NTENTS
N
I
DEX
6
7
WORKING WITH
O
C
NTENTS
INTUOS3
I
NDEX
This section introduces you to the Intuos3 professional pen tablet. Intuos3 consists of a tablet that serves as
your work area and the Intuos3 input tools
you use on the tablet. The quickest way to learn about Intuos3 is
to become familiar with its appearance and features. If you are new to using a pen tablet, read the following
sections to learn about your Intuos3 tools and how to use them with the tablet.
Note: Intuos3 tools will only work on an Intuos3 tablet. They will not work on an Intuos or Intuos2 series
tablet. Likewise, older Intuos or Intuos2 input tools will not work on your Intuos3 tablet.
Intuos3 tab
let features
Intuos3 input tools
Setting up your work area
Using the Grip Pen
Using the mouse
Using the Airbrush and Art Pen
Working with the tablet
O
C
NTENTS
N
I
DEX
7
Intuos3 tablet features
Cable.
Recessed cable
tracks on the back
of the tablet allow
the cable to exit
the top or left of
the tablet.
Customizable
ExpressKeys.
O
C
NTENTS
Status LED.
I
NDEX
ORKING
W
Pen stand.
WITH
NTUOS
I
8
3
Touch Strip controls.
Note: 4x5 / A6 tablet
models come equipped
with ExpressKeys and a
single Touch Strip
located to the left of the
tablet’s active area.
Note: Intuos3 6x8 / A5 tablet shown. To learn more about your
tablet, see working with the tablet. For a complete listing of Intuos3
tablets, see ordering parts and accessories.
Tablet work surface.
Identifies the tablet
active area.
O
C
NTENTS
N
I
DEX
8
O
C
NTENTS
I
NDEX
ORKING
W
WITH
NTUOS
I
9
Intuos3 input tools
Various input tools are available for your tablet. All Intuos3 tools are cordless, batteryless, and
ergonomically designed. Each tool also features a unique T
tools and to customize each tool differently.
The Intuos3 Grip Pen is a pressure-sensitive freehand tool for image editing and creating natural-looking
pen and brush strokes.
If you prefer to use a mouse for general navigation, pointing, and clicking, just set aside your Intuos3 pen
and place the Intuos3 mouse on the tablet – the mouse is cordless and symmetrically designed so you can
use it just as easily in your left or right hand.
Eraser.
Rubberized
grip area.
Fingerwheel. An integrated
middle button and rolling
wheel that can be used for
up and down scrolling in the
active window. It can also
be customized to perform a
variety of button functions.
ool ID, which enables you to work with multiple
3
DuoSwitch (rocker style).
Replaceable nib
(standard or stroke tip).
Intuos3 Grip Pen.
Programmable buttons can be
customized for the way you like to work.
Note: Some product configurations may not include the Intuos3 mouse.
Intuos3 mouse.
O
C
NTENTS
N
I
DEX
9
O
C
NTENTS
I
NDEX
ORKING
W
WITH
NTUOS
I
10
Intuos3 optional tools
Like the Intuos3 Grip Pen, the optional Airbrush is a pressure-sensitive freehand tool for image editing and
creating natural-looking pen and brush strokes.
Er
aser.
Side switch.
Fingerwheel.
3
Replaceab
le nib.
Intuos3 Airbrush (optional accessory).
Intuos3 Art Pen (optional accessory).
The pressure-sensitive Art Pen also responds to the tilt and rotation you
apply to the pen. With practice you can create almost any type of brush
effect or marker stroke. The Art Pen comes with chisel-shaped nibs in both
hard plastic and felt material for simulating different pen and brush feels.
Replaceable nib
(standard or inking tip).
Intuos3 Ink Pen (optional accessory).
The Ink Pen is pressure-sensitive and comes with
replaceable inking cartridges. With the Ink Pen you
can write or draw as you do with a regular pen – just
place a sheet of paper on your tablet and everything
you write will be captured on paper and on your
computer.
For information on these and other available Intuos3 tablets, tools, or parts and accessories, see order
ing
parts and accessories. Visit Wacom’s web site for a list of applications supporting the Art Pen rotation and
Airbrush fingerwheel features. See product inf
ormation.
O
C
NTENTS
N
I
DEX
10
O
C
NTENTS
I
NDEX
ORKING
W
WITH
NTUOS
I
11
Setting up your work area
To minimize fatigue, organize your work area so you can work comfortably. Position your tablet, input tools,
and keyboard so they are easily accessible without unnecessary reaching. Your monitor should be
positioned so you can view it comfortably with a minimum of eyestrain. For best results, orient the tablet so
the screen cursor follows the same direction as your hand movements on the tablet.
Here are some other points to keep
in mind:
• Take short breaks between
tasks to stretch and relax your
muscles.
• Use a gentle grip when working
with your tools.
• Alternate tasks and tools
throughout the day.
• Maintain a good posture at all
times. Minimize awkward
postures and repetitive
movements that cause
discomfort.
• Change your position if you feel
any discomfort due to your work
position.
3
Note: Wacom makes no representation, promise or guarantee that Wacom products will cure or prevent, in
whole or in part, mouse-induced repetitive stress symptoms, injuries or conditions. Individual results may
vary. Always obtain competent medical advice to determine the most appropriate treatment for your specific
situation.
See w
orking with the tablet for additional information.
O
C
NTENTS
N
I
DEX
11
O
C
NTENTS
I
NDEX
ORKING
W
WITH
NTUOS
I
12
Using the Grip Pen
The Intuos3 Grip Pen is cordless, batteryless, and pressure sensitive. There are four basic techniques for
using the pen: pointing, clicking, double-clicking, and dragging. With a bit of practice, using the pen will
become second nature to you. If you are unfamiliar with using the pen, try the exercises on the following
pages.
Holding the pen
ointing
P
Clicking
Dragging
Using the side switch
Drawing with pressure-sensitivity
Drawing with tilt
Erasing
Eye-hand coordination exercise
3
Holding the pen
Hold the Intuos3 pen like you would a normal pen or pencil. Make sure the DuoSwitch is in a convenient
location where you can toggle it with your thumb or forefinger, but not accidently press the switch while
drawing. You can tilt the pen in any way that feels most comfortable for drawing.
Position for drawing.
Your tablet comes with a free-standing pen stand that is used to
hold your pen when it is not in use. Position the pen stand within
easy reach of your tablet. When you are between tasks, store the
pen either horizontally or vertically in the pen stand; this makes the
pen available for quick, easy access when you are working.
Important: When the Intuos3 pen is not in use, place it in
the pen stand or lay it flat on your desk. To maintain the
sensitivity of your pen tip, do not store the pen in a container
where it will rest on its tip or eraser. Leaving an Intuos3 tool
on the tablet may interfere with screen cursor positioning
when using other pointing devices. Also, leaving the pen on
the tablet when not in use can prevent your computer from
going to sleep.
Position for erasing.
CONTENTS
N
I
DEX
12
WORKING WITH INTUOS3
CONTENTS
INDEX
13
Pointing
The Intuos3 pen positions the pointer (or cursor) on your screen. You can position the screen cursor two
different ways, like a pen (P
• In PEN mode, the tablet’s active area is a mapped representation of your computer screen where every
point on the active area corresponds to exactly one point on the display screen; wherever you place the
pen on the tablet, the screen cursor will jump to the corresponding point on the screen. This is the
default setting for the pen.
• In M
OUSE mode, the default setting for the Intuos3 mouse, you move the cursor with a “pick up and slide”
action similar to using a traditional mouse.
EN mode) or like a mouse (MOUSE mode).
Try moving the screen cursor by lifting the pen and
placing the pen tip in a new location on the tablet.
The cursor instantly jumps to the new location.
When positioning the screen cursor and operating the side
switch, the pen tip needs to be within 6 mm (0.25 inch) of
the tablet surface. You do not need to touch the tablet with
the pen tip in order to move the screen cursor or use the
side switch.
All Intuos3 tools, including the mouse, work only over the
active area of the tablet.
Hints:
• If you are used to working with a mouse and find that using a pen is somewhat difficult,
try the eye-hand coordination exercise.
• Pointing is easier when you orient the tablet so the screen cursor follows the same
direction as your hand movements on the tablet.
6 mm (0.25 inch)
CONTENTS
INDEX
13
WORKING WITH INTUOS3
CONTENTS
INDEX
14
Clicking
You typically click to highlight or select something on the screen, and double-click to open it.
Clicking. To click, tap the pen tip once on the tablet, or press the pen tip on the tablet with enough force to
register a click. (There is no audible pen tip “click” sound.) Try clicking on a folder icon by moving the screen
cursor over the icon and pressing down on the pen tip. The folder should highlight when you press.
Double clicking. To double-click, quickly tap the tablet twice in the same place with the pen tip. This is like
clicking twice with a mouse button. Try double-clicking on a folder icon to open it.
Hints:
• Press the upper side switch to double-click. This is easier than
tapping twice with the pen tip, and is the preferred method of
double-clicking with a pen.
• Windows: You can make navigating with the pen easier by
configuring Windows to select when the pen is over an icon and
to launch the icon with a single click. To turn on this feature:
Open a folder, select the TOOLS pull-down menu, and FOLDER
OPTIONS.... From the GENERAL tab select the option SINGLE-
CLICK TO OPEN AN ITEM (POINT TO SELECT).
Dragging
Dragging is used to select and move objects on the screen. To drag, first point to an object. Then press the
pen tip to the tablet and slide it across the tablet surface. The selected object will move across the screen.
To select text, move the screen cursor to the beginning of a text line, then drag the pen across the tablet until
the text is highlighted.
First, try moving an icon on the screen. Then, within a
document, select some text by pressing and dragging
the pen tip across the text.
CONTENTS
INDEX
14
WORKING WITH INTUOS3
CONTENTS
INDEX
15
Using the side switch
The Intuos3 Grip Pen is equipped with a DuoSwitch. This switch has two programmable functions that can
be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is
within 6 mm (0.25 inch) of the tablet’s active area. You do not have to touch the pen tip to the tablet in order
to use the switch.
The upper switch position is set to DOUBLE CLICK, and
the lower switch is set to RIGHT CLICK by default.
Hint:
• Press the upper side switch to double-click. This is easier than tapping twice with the
pen tip.
• Use a right-click to bring up application-specific or icon-specific menus.
Note: The DuoSwitch on the Grip Pen can be removed if you do not need the switch
functionality. See other parts and accessories for information on ordering an alternate pen
grip for use with the side switch removed.
To assign new switch functions, see customizing tool b
uttons.
CONTENTS
INDEX
15
WORKING WITH INTUOS3
CONTENTS
INDEX
16
Drawing with pressure-sensitivity
The Intuos3 pen responds to the nuance and inflection of your hand movements, enabling you to create
natural-looking pen and brush strokes. Many graphics applications have drawing tools that respond to the
pressure you place on the pen. For example, in some drawing programs sliders are used to vary brush
characteristics (width, color, and opacity). These characteristics can be controlled much better by the pen’s
pressure-sensitivity – you can vary line width, blend colors, and change opacity with the pressure you exert
upon the pen.
To draw with pressure-sensitivity, first select a pressuresensitive tool from your application’s tool palette. Then draw
along the surface of the tablet while applying various amounts
of pressure downward on the tip of the pen. Press hard for
thick lines or dense color. Press gently for thin lines or softer
color. To adjust the tip feel, see adjusting tip feel and double-
click.
Visit our web site for a list of graphics applications that support
pressure. See product information.
Drawing with tilt
As with pressure-sensitivity, the tablet recognizes when you tilt the pen from vertical to inclined positions.
In some drawing applications, tilt can be used to control line shape and thickness. This is like working with
an airbrush where tilt can be used to make a line thin when the tool is vertical, or wide when the tool is tilted.
In other applications, you can adjust tilt to define brush characteristics such as width, color and opacity.
To test tilt, draw a curve in a graphics application (such as
Painter) that supports tilt. Be sure that the tilt function in
your application is active, then change the tilt of the pen as
you draw to vary the shape and thickness of the brush
stroke.
As an example, when the brush shape dynamics in
Photoshop have been configured for tilt operation, tilting
the pen results in an elongated pattern. This simulates
the effects of an airbrush spray that is angled away from
the paint surface.
To adjust the amount of pen tilt required to produce a desired tilt effect in your application, see customizing
tilt sensitivity. Visit our web site for a list of applications that support tilt. See product information.
CONTENTS
INDEX
16
WORKING WITH INTUOS3
CONTENTS
INDEX
17
Erasing
The eraser on the Intuos3 pen works like the eraser on a pencil. In graphics applications that support the
pen’s eraser, you can erase intuitively and naturally. When you use the pen’s eraser, the application will
automatically switch to the eraser tool. In applications that support pressure-sensitivity, you can select
pressure-sensitive tools in an application’s tool palette to vary the width and depth of your erasures as you
change the amount of pressure you exert upon the pen.
For Windows, you can also use the eraser in many standard office applications. The eraser will not be
pressure sensitive in these applications, but you can use it to select and delete text or spreadsheet cells.
For information on customizing your eraser, see adjusting er
aser feel.
Visit our web site for a list of graphics applications that support the eraser (see product information). If the
eraser is not supported in an application, you can still use the eraser for navigating and drawing.
CONTENTS
INDEX
17
WORKING WITH INTUOS3
CONTENTS
INDEX
18
Eye-hand coordination exercise
If you use a mouse, you may remember how long it took to get used to positioning the screen cursor.
Your Intuos3 Grip Pen, likewise, will take a bit of practice to master the technique of positioning the screen
cursor in P
This exercise is designed to retrain your eye-hand coordination for using the pen:
1. Open any graphics application. Use the line tool to draw a rectangular grid with line spacings of about
20-25 mm (3/4 to 1 inch). You can use your traditional mouse to do this.
2. Choose a free-hand tool in your application and use the pen to draw a dot at each grid intersection.
3. Draw an X at each grid intersection.
4. Now draw a circle around each intersection. Your screen should look like this:
EN mode. This may seem difficult at first, but it is more natural and faster than in MOUSE mode.
5. Clear your screen and make a simple drawing of your own. The more you use your Intuos3 pen, the
easier drawing and navigation will become.
CONTENTS
INDEX
18
WORKING WITH INTUOS3
CONTENTS
INDEX
19
Using the mouse
The Intuos3 mouse is a cordless, batteryless, maintenance-free mouse that works on any Intuos3 tablet.
The left and right side buttons are set for BACK and
FORWARD functionality within your Internet browser.
The right button is set to RIGHT
CLICK by default, and displays
a context menu when pressed.
The left button is set to CLICK by default, and
is the primary button used for selecting.
The fingerwheel can be rolled, or pressed down for an
additional button function.
• Rolling. By default, rolling the fingerwheel will scroll in
most windows and applications. Move the fingerwheel
forward to scroll up, and back to scroll down. You can also
set the fingerwheel to issue a custom keystroke for each
notch of wheel movement. This is useful when working
with repetitive functions, such as zooming in Photoshop or
moving forward and backward within your Internet
browser.
• Wheel button. Press down on the wheel to perform a
button click. The wheel button is set to middle-click by
default.
Hint: For MS Office applications that support
a wheel mouse, press the CTRL key and move
the fingerwheel to zoom in and out.
Note: Some product configurations may not include the Intuos3 mouse.
Important: When the Intuos3 mouse is not in use, place it on your desk. Leaving an Intuos3 tool on
the tablet may interfere with screen cursor positioning when using other pointing devices, or may
prevent your computer from going to sleep.
To learn how to adjust the mouse behavior for your preferences, see customizing the
CONTENTS
INDEX
mouse.
19
WORKING WITH INTUOS3
CONTENTS
INDEX
20
Using the Airbrush and Art Pen
The optional Intuos3 Airbrush works like the pen, but also includes a fingerwheel for an additional degree of
control. With proper software support, you can simulate realistic airbrushing. For example, tilting the
Airbrush can cause the spray pattern to elongate and feather out. Rolling the fingerwheel can adjust the
spray intensity, and pressure on the tip can control the brush size.
All other functions work similarly to the pen. For additional information, see using the
Important: When the Airbrush is not in use, lay it flat on your desk. To maintain the sensitivity of
your Airbrush tip, do not store the Airbrush in a container where it will rest on its tip. Leaving an
Intuos3 tool on the tablet may interfere with screen cursor positioning when using other pointing
devices.
Hold the Airbrush with your thumb and middle finger. The fingerwheel should be in a convenient location for
you to roll it with your index finger. Tilt the Airbrush to find a comfortable position that allows you to paint and
draw with pressure-sensitivity.
For Windows, the side switch is set for a RIGHT CLICK by
default. For Macintosh, the switch is set for DOUBLE CLICK.
Grip Pen.
Roll the fingerwheel backwards to increase ink flow
or brush size, and forward to reduce it.
Your index finger should operate the wheel
independently of the pressure you apply to the tip.
The optional Intuos3 Art Pen responds to the pressure, tilt, and rotation you apply to the pen.
The Art Pen supports 360 degrees of rotation around the pen axis. As you
draw within an application that supports rotation-sensitivity, simply twist
the Art Pen to create lines that narrow or broaden. For example, while
painting you can vary the rotation of a non-circular brush to change the
stroke thickness.
Depending on the brush shape characteristics you have selected in your
application, you can simulate calligraphy pens, broad felt tip markers, and
any other non-circular brushes or tools.
Be sure to see the Intuos3 Tips and Tricks located on the Wacom Tablet
CD for more information on using the Art Pen.
Visit Wacom’s web site to learn where to purchase an Intuos3 Airbrush or Art Pen, and which applications
currently support the Airbrush fingerwheel or Art Pen rotation. See product inf
CONTENTS
INDEX
ormation.
20
WORKING WITH INTUOS3
CONTENTS
INDEX
21
Working with the tablet
The middle area of the Intuos3 tablet is the working, or active, area for the pen and mouse. Rest your hand
on the tablet and then work with the pen on the active area of the tablet just as if you were using a ball point
pen on a piece of paper. Wherever you place your pen on the tablet active area, the screen cursor will jump
to the corresponding point on the screen. See using the
about using your input devices on the tablet.
To speed up your workflow in graphics and other applications, all Intuos3 tablets feature ExpressKeys and
Touch Strip(s) located next to the tablet’s active area. While using the pen with your dominant hand on the
active area, you can simultaneously use your other hand to operate the ExpressKeys or Touch Strip.
For example, you can change the properties of your tool without removing your hands from the Intuos3
tablet. (Note that 4x5 / A6 tablet models come with ExpressKeys and a single Touch Strip located to the left
of the tablet’s active area.)
Touch Strip.
ExpressKeys. Press the customizable
ExpressKeys to perform frequently used
functions or keystrokes. By default, the
keys emulate keyboard modifier keys.
In Photoshop, this provides quick access
to the grabber hand and alternate tools.
Grip Pen and using the mouse for more information
ExpressKeys.
6x8 / A5 tablet shown.
Touch Strip. Slide your finger over the Touch Strips to zoom,
scroll, or perform custom keystroke actions. By default, the
Touch Strips enable you to zoom in most graphics applications
and to scroll in other applications. You can also set them to
issue custom keystrokes. For example, you might set a Touch
Strip function to change brush sizes when working in
Photoshop.
CONTENTS
INDEX
21
WORKING WITH INTUOS3
CONTENTS
INDEX
22
Using ExpressKeys
Press the ExpressKeys with your secondary hand to toggle between tools or change tool properties while
you are using your primary hand to work with your pen on the Intuos3 tablet. The default settings were
chosen to optimize your workflow in Photoshop and other graphics applications, using the following modifier
keys:
Button 1: C
Button 2: SHIFT modifier key.
Button 3: ALT modifier key for Windows. OPTION modifier key for Macintosh.
Button 4: SPACE key (spacebar).
TRL modifier key for Windows. COMMAND (Apple key) for Macintosh.
2
1
3
4
2
3
4
6x8 / A5 tablet shown.
1
The ExpressKeys are chordable. For example, pressing keys 3 and 1 together
simulates ALT+CTRL in Windows, or OPTION+COMMAND on Macintosh systems.
Tips:
• In Photoshop, pressing the spacebar (key 4 on your Intuos3 tablet) switches the
currently selected tool to the hand tool and lets you pan (move) the image within
the application window.
• In Photoshop and many other graphics applications, the ALT, CTRL, and SHIFT
modifier keys modify a tool or switch to a complementary tool while the modifier
key is pressed.
The ExpressKeys are fully customizable, enabling you to make the best possible use of them. You may want
to consider the following ways of working with the ExpressKeys:
• Set a pair of keys to commonly used keystrokes, such as [ and ] to decrease and increase your brush
size in Photoshop.
• Set a key to a commonly used keyboard shortcut in order to open files or start an application.
• If you prefer not to (or cannot) use the side switches on your Intuos3 pen, then set a key to right- or
double-click.
• Choose from any of the other available functions.
See customizing
ExpressKeys for more details on the available key settings.
If you require different key functions in different applications, you can easily set up application-specific
settings for the tablet controls. See creating an application-specifi
c setting for more information.
CONTENTS
INDEX
22
WORKING WITH INTUOS3
CONTENTS
INDEX
23
Using the Touch Strips
Slide your finger over the Touch Strip to quickly zoom in or out, scroll up or down, or perform other functions
with your secondary hand while using your dominant hand to work with your pen or mouse. You can also set
each Touch Strip to issue custom keystrokes. For example, you might set a Touch Strip action to cycle
through layers when working in Photoshop. You can use the Touch Strips in three different ways:
• Standard operation: Slide your finger up or down to zoom, scroll, or issue the assigned keystroke
function.
• Continuous operation: Press and hold your finger at either end of the Touch Strip to continuously
scroll. This is useful for scrolling through long documents or web pages.
• Single step operation: Press and release your finger at either end of the Touch Strip to zoom, scroll, or
issue the assigned keystroke function one step at a time.
Press and hold here for
continuous operation, or
press and release for
single step operation.
6x8 / A5 tablet shown.
To use the tip of your Intuos3 pen to operate the Touch Strip, rest the pen tip against
the edge of the Touch Strip adjacent to the tablet’s active area. Then press hard
enough to issue a click and move the pen tip up or down along the Touch Strip edge.
(Only the inside edge of the Touch Strip responds to pen input.)
By default, the Touch Strips enable you to zoom in most graphics applications and to scroll in other
applications. Each Touch Strip can be independently customized to meet your needs.
Tip: Photoshop users who frequently change brush sizes may want to assign the [ and ] keys to a Touch
Strip. Sliding your finger up or down the Touch Strip will then change the brush size without the need to
reach for the keyboard or access the Photoshop B
RUSHES palette.
See customizing tablet Touch Strips and advanced Touch Strip settings if you would like to customize the
way your tablet Touch Strip(s) work.
CONTENTS
INDEX
23
CONTENTS
INDEX
24
CUSTOMIZING
After you master the basics of using your Intuos3 professional pen tablet, you may want to customize the
way Intuos3 works. This chapter describes how to use the Wacom Tablet control panel to adjust your
Intuos3 tablet and tool settings.
Advanced users can learn how to further optimize Intuos3 by creating application-specifi
Opening the control panel
Control panel o
Control panel settings
verview
Opening the control panel
To open the control panel, use the Intuos3 tool you wish to customize on the tablet:
• Windows. Click on the Windows START button and choose ALL PROGRAMS. (For Windows 2000, choose
ROGRAMS group.) Then select WACOM TABLET and choose the WACOM TABLET PROPERTIES option.
the P
• Macintosh. Open SYSTEM PREFERENCES from either the Dock, the Apple menu, or from the
PPLICATIONS folder. Then double-click on the WACOM TABLET icon.
A
c settings.
After you have opened the Wacom Tablet control panel, you can begin customizing Intuos3.
CONTENTS
INDEX
24
CUSTOMIZING
CONTENTS
Control panel overview
Use the Wacom Tablet control panel to customize Intuos3.
The upper portion of the control panel displays icons representing your
TABLET, TOOLs, and the APPLICATIONs with customized tool settings.
Tabs display
customizable settings
for the selected tool.
INDEX
25
Choose FUNCTIONS to
customize your tablet
control and Pop-up
Menu settings.
Choose PEN to
customize your
Intuos3 pen settings.
Choose MOUSE to
customize your
Intuos3 mouse
settings.
Displays a dialog
box containing
information about
the tablet and tablet
software, including
an option to access
the DIAGNOSTICS
dialog box.
Displays advanced options.
Displays this User’s Manual.
The DEFAULT button
resets the selected
tab to its default
settings.
As you explore the control panel, experiment with different settings to find what works best for you.
Any changes you make will take effect immediately, but you can always click D
factory settings. See control panel settings
for more information on the features and functions of each tab.
EFAULT to return a tab to the
Tool Tips are available for most control panel items. Simply position the screen cursor over an item and let it
rest there; in a few moments the Tool Tip will pop up.
Additionally, your keyboard tab and arrow keys can be used to navigate the control panel.
CONTENTS
INDEX
25
CUSTOMIZING
CONTENTS
INDEX
26
Control panel lists and tabs: The control panel TABLET, TOOL, and APPLICATION lists allow you to select the
tablet, tool, or application for which you want to change settings. To change tool settings, open the control
panel using the tool you wish to customize. The tool will be automatically selected in the T
appropriate tabs will be displayed. To customize settings for a different tool, select it from the T
clicking on its icon (the appropriate tabs will be displayed). See customizing the
pen, customizing the
OOL list, and the
OOL list by
mouse, and customizing the tablet functions for more information.
The TABLET list displays an icon for any
supported tablet that has been installed on
your system. All settings shown below this
list apply to the selected tablet.
The TOOL list displays an icon for the tablet
FUNCTIONS, and for each Intuos3 tool that has
been used on the tablet. When a new tool is
first used on the tablet it is automatically
added to the tool list, and functions with the
default settings. See also working with
multiple tools.
The APPLICATION list lets you define tool
settings that only apply to a specific
application. See working with application-
specific settings.
Your current selections are highlighted.
Note: The control panel A
PPLICATION list is for advanced users; it is not necessary to select or add
applications in order to customize your Intuos3 tool(s).
Control panel settings
Use these sections as a reference when working with the Wacom Tablet control panel; they provide detailed
information about each tab and some of the more complex topics. Many of the sections also contain useful
customizing tips.
Customizing the pen
Customizing the mouse
Tablet to screen mapping
Customizing the tablet functions
Customizing the Pop-up Menu
Working with multiple tools
Working with application-specific settings
CONTENTS
INDEX
26
CUSTOMIZING
CONTENTS
INDEX
27
Customizing the pen
Customizing your Intuos3 pen is easy. First open the Wacom Tablet control panel using the pen. The pen
will be selected in the T
available options.
Customizing tool buttons
OOL list and the appropriate tabs will be displayed. Select a tab and choose from the
Adjusting eraser feel
Customizing tilt sensitivity
Tablet to screen mapping
Adjusting tip feel and double-click
Working with application-specific settings
CONTENTS
INDEX
27
CUSTOMIZING
CONTENTS
INDEX
28
Adjusting tip feel and double-click
To adjust the tip sensitivity of your Intuos3 pen, select the PEN tab. To create broad brush strokes or to click
with a light touch, use a soft tip setting. For maximum control while drawing thin lines, use a firm tip setting.
Customizes the amount of pressure
needed to click or draw. Drag the
slider to a softer or firmer setting.
Displays the tip FEEL DETAILS dialog
box where you can further
customize the tip sensitivity.
Press down on the tablet with your
pen tip to test the current tip feel
setting. You can use the CURRENT
PRESSURE bar to determine how
hard you must press on the pen to
reach maximum pressure.
Adjusts the size of the double-click area.
A larger setting makes double-clicking
easier.
Drag the slider to the OFF position if you
do not want double-click assist.
Hints:
• Use a soft TIP FEEL for a wider range of pressure values with most pressure-sensitive
applications.
• In some applications a soft pressure setting can make the pen overreact – any small
press on the pen is magnified on the screen. If you experience this, try a firmer TIP
FEEL setting.
• Double-clicking: To make double-clicking easier, expand the tap area that accepts a
double-click (the double-click distance).
Note: A large double-click distance may cause a delay at the beginning of your
brushstrokes in some drawing applications. If you notice such effects, try setting a
smaller double-click distance and using the side switch to double-click (see using the
side switch). You can also set one of the ExpressKeys to double-click.
Returns the tab settings
to their factory default
conditions.
CONTENTS
INDEX
28
Loading...