INSTRUCTIONS: Display Fixture
Model: DL-007
IMPORTANT SAFETY INSTRUCTIONS Lighted lamp is HOT:
WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV
RADIATION, and OR INJURY TO PERSONS:
1. Turn off/unplug and allow cooling before replacing bulb (lamp).
2. Bulb (lamp) gets HOT quickly! Only contact switch/plug when turning on.
3. Do not touch hot lens, or guard.
4. Do not remain in light if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that may burn.
7. Use only with a 50-watt or smaller bulb (lamp).
8. Do not touch the bulb (lamp) at any time. Use a soft cloth. Oil from skin may damage bulb
(lamp).
9. Do not operate the luminaire with a missing guard.
SAVE THESE INSTRUCTIONS
Installing Lamp:
1. Use a 12V MR16 lamp 50watt maximum (purchase
separately).
2. Align lamp pins with socket holes and gently press in.
3. Place Clear glass lens over lamp and secure with
retaining ring.
Installing Clamp:
1. Installs on a firm flat surface, such as wood,
particleboard, cubicle partition etc. Standard clamp
accommodates surfaces ” to 2 1/2” wide.
2. Use the angle adjustment knob on the side to change
the angle.
3. Adjust the height by sliding the telescoping rod.
Accessories:
1. Supplied with standard clamp that opens to 2 ’ wide.
2. An optional “DLC-4” clamp opens to 4”.
3. An optional DLC-P clamp works on 2 1/2” pipe
4. Fixture supplied with clear glass lens. Maybe
substituted with various accessory lenses consult
catalog for compatib ility .
12/21/05 Rev 1
Loading...