Vulta FA-P1 User manual

TAIL CAP AND

PRESSURE SWITCH

FA-P1

USER MANUAL

Thank you for choosing Vulta.

The FA-P1 Tail Cap and Pressure Switch
assembly delivers reliable, easy-to-use
remote power for your Vulta Tornado-series
flashlight. The Pressure Switch is a wired
remote that plugs into the Tail Cap and
provides temporary-on functionality. It has
five parallel internal switches for multiple
points of activation, so you can press nearly
anywhere on the Pressure Switch to power
your flashlight. The FA-P1 Tail Cap functions
exactly like your flashlight’s tailcap, replacing
it to provide temporary-on and constant-on
power. The FA-P1 Pressure Switch cable can
be unplugged from the Tail Cap, enabling
you to use the FA-P1 with your flashlight for
normal handheld operation.

The FA-P1 carries a waterproof rating of IPX­8, and the Tail Cap is crafted from MIL-SPEC
Type III hard anodized aluminum alloy to
withstand harsh environments. The Pressure
Switch wire’s outer layer is made from high­tension silicone to handle large-current flow
for continuous use.

02

VULTA ACCESSORIES

PRECAUTIONS ⚠

• Please read and follow these instructions and
keep this manual in a safe place.

• Do not attempt to disassemble or repair this
product.

• Keep this product away from children.

• Use only parts provided by the manufacturer.

• Make sure that this product is intact and that
there are no missing parts.

• To avoid damage to this product, be careful
not to overtighten or improperly thread any of
the threaded fittings.

• All photos are for illustrative purposes only.

VULTA ACCESSORIES

03