Vulcan Hart V2FT36 General Manual
Item # C.S.I. Section 11420
HEAVY DUTY COOKING
HEAVY DUTY GAS RANGE
DUAL FRENCH TOP / 36" WIDE GAS RANGE
Model V2FT36C
shown on a standard oven base
SPECIFICATIONS
36" wide heavy duty gas range, Vulcan model No. V2FT36
(modular), V2FT36B (cabinet base), V2FT36S (standard oven base)
or V2FT36C (convection oven base). Modular construction for
ease of installation. Stainless steel front, plate ledge, front top
ledge with pull-out condiment rails, sides, base, stub back and
6" adjustable legs on all “B”, “S”, & “C” models. Stainless steel
extra deep crumb tray. Two 25,000 BTU/hr. cast 2 ring burners.
Individual pilots and controls for each burner. Heavy polished
cast iron French plate. Individual pilots and controls for each
burner. Standard Oven: 50,000 BTU/hr. with porcelain oven
bottom, sides, and interior door panel. Convection Oven: 32,000
BTU/hr with porcelain oven bottom, sides, and Interior door
panel (115v-1phase blower motor, 4 amps, 6' cord & plug).
Ovens measure 27"w x 27"d x 13"h. Standard oven thermostats
adjust from 150° – 550°F. Convection oven adjusts from
175° – 550°F; and the optional nishing oven for standard ovens,
300° – 650°F. Standard oven supplied with one rack, convection
oven with two. Both ovens allow for three rack positions.
Oven door is heavy duty with counter weight door hinges.
1
1
⁄4" diameter front manifold and 11⁄4" rear gas connection,
capped. Total input 50,000 BTU/hr.
Exterior Dimensions:
3
⁄4"d x 36"w x 36"h on 6" adjustable legs
36
V2FT36
V2FT36B
V2FT36S
V2FT36C
Dual French Top / Modular
Dual French Top / Cabinet Base
Dual French Top / Standard Oven
Dual French Top / Convection Oven
STANDARD FEATURES
Stainless steel front, front top ledge, burner box, sides, base, ■
exterior bottom and stub back
1
1 ■
⁄4" diameter front gas manifold with 11⁄4" rear gas connection
(capped)
Two 18" wide French Tops ■
25,000 BTU/hr. burners (2 each ring burner) ■
50,000 BTU/hr. standard oven burner ■
32,000 BTU/hr. convection oven burner ■
Porcelain oven cavity ■
Individual pilots and controls for each burner ■
Polished cast iron French Top ■
4" stainless steel stub riser ■
6" adjustable stainless steel legs for “S”, “C”, & “B” models ■
(no legs for modular model)
Stainless steel cabinet base doors ■
One year limited parts and labor warranty ■
OPTIONAL FE ATURES (Factory Installed)
1
⁄4" rear gas connection
1
Cap and cover front manifold
Stainless steel oven cavity
650°F oven thermostat and steel hearth. (“S” models)
Fan cooling package (“C” models)
4" adjustable anged feet for modular models
6" adjustable anged feet for “S”, “C”, & “B” models
Less legs for dolly mounting of cabinet base models
Set of 4 casters, 6" high (two locking)
3" high toe base for curb mounting
3
⁄4", 1", or 11⁄4" gas pressure regulator (specify gas type –
pack loose)
Common condiment type, telescoping plate rails
ACCESSORIES (Packaged & Sold Separately)
Extra removable shelves for use with Universal rack guides
(cabinet base)
Banking strip
Common condiment type, telescoping plate rails (starting
at 24" length)
Straight, diamondcast, rod, and wafe/sh grates
10", 22", or 34" high back risers (no shelf )
22" single deck solid or o-thru high shelf risers
34" double deck solid or o-thru high shelf risers
Dolly frames
Flexible gas hose with quick disconnect & restraining device
a divisi on of IT W Food Equ ipme nt Group L LC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F37432 (08/10)
HEAVY DUTY COOKING
36.750"
40.500"
36.000"
13.375"
28.750"
8.000"
36.000"
18.000"
26.500"
36.000"
DUAL FRENCH TOP / 36" WIDE GAS RANGE
INSTALLATION INSTRUCTIONS
A properly sized gas pressure regulator suitable for battery or 1.
single unit application must be furnished and installed. Natural gas
6.0" W.C., propane gas 10 W.C.
An adequate ventilation system is required for commercial cooking 2.
equipment. Information may be obtained by writing to the National
Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269,
www.NFPA.org. When writing, refer to NFPA No. 96.
These units are manufactured for installation in accordance with 3.
ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may
be obtained from The American Gas Association, 400 N Capitol St.
NW, Washington, DC 20001, www.AGA .org.
4. Clearances Rear Sides
Combustible 10" 10"
Non-combustible 0" 0"
HEAVY DUTY GAS RANGE
For proper combustion, install equipment on adjustable legs or 5.
casters. On curb or platform, allow 3
with leveling bolts are required for curb installation. Specify when
ordering.
Cannot be batteried with GH series equipment.6.
This appliance is manufactured for commercial installation only 7.
and is not intended for home use.
NOTE:
In line with its policy to continually improve its product, Vulcan
reserves the right to change materials and specications without notice.
Specify type of gas when ordering.
Specify altitude when above 2,00 0 feet.
1
⁄2" front overhand. Toe base
TOP
CONFIGURATION
MODEL
NUMBER
DESCRIPTION
TOTAL INPUT
BTU / HR
V2FT36 Dual French Top / Modular 50,000 404 / 183
V2FT36B Dual French Top / Cabinet Base 50,000 504 / 229
SHIPPING WEIGHT
LBS / KG
V2FT36S Dual French Top / Standard Oven Base 100,000 685 / 311
V2FT36C Dual French Top / Convection Oven Base 82,000 763 / 346
This appliance is manufactured for commercial use only and is not intended for home use.
a divisi on of IT W Food Equ ipme nt Group L LC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F37432 (08/10)
NOTE: In line with its p olicy to c ontinu ally im prove its products, Vulcan res erve s the rig ht to chan ge mate rials a nd spe cica tions without n otice.
Loading...