Vulcan Hart 1VK85D, 1VK85C General Manual
FRYERS
Model 1VK85C
SPECIFICATIONS
85 - 90 lbs. capacity free standing gas fryer, Vulcan-Hart Model
No. (1VK85A) (1VK85D) (1VK85C). 90,000 BTU/hr. input. Stainless
steel cabinet. Set of four 6" adjustable casters (2 locking).
Stainless steel fry tank with FivePass™ heat transfer system
yielding 65% cooking and 78% thermal efciency and “V” shaped
cold zone. SoftStart™ ignition system using 35,000 BTU/hr.
to extend oil life during start up. Idle rate of 6,298 BTU/hr. to
maintain cooking temperature. 11⁄4" full port ball type drain valve.
Twin fry baskets with plastic coated handles. Solid state analog
knob control, digital, or programmable computer control systems
all standard with electronic matchless ignition. Tank brush and
clean-out rod included.
Overall dimensions:
21"w x 343⁄8"d x 471⁄8"h. Working height 361⁄4".
CSA design certied. NSF listed.
SPECIF Y TYPE OF GAS WHEN ORDERING
Natural Gas.
Propane Gas.
SPECIFY ALTITUDE
Item # C.S.I. Section 11420
1VK85 SERIES
FREE STANDING GAS FRYER
1VK85A: Solid state analog knob control behind the door. Accu-
rate temperature control 200° to 390°F. User selectable
fat melt modes. Electronic ignition.
1VK85D: Accurate temperature control 200-390°F with digital
display. Fast recovery. Cook with compensating time
or actual time. Electronic ignition. Digital temperatures:
Fahrenheit or Celsius. Three melt modes. Two countdown timers. Auto boil-out mode.
1VK85C: Programmable computer controls with digital character
display. 10 menu timers display product name and
cook times. Ofine programming of menu items
uploaded through USB interface, software included.
Accurate temperature control 200-390°F with digital
display. Fast recovery. Cook with compensating time
or actual time. Electronic ignition. Digital temperatures:
Fahrenheit or Celsius. Three melt modes.
STANDARD FEATURES
■ 90,000 BTU/hr. input.
■ Maintains idle temperature setting with only 6,298 BTU/hr. to
save ene rgy.
■ Energy saving SoftStart™ ignition system extends oil life while
requiring lower BTU’s.
■ Energy efcient FivePass™ heat transfer system yielding 65%
cooking and 78% thermal efciency.
■ Stainless steel fry tank, 85 - 90 lb. capacity. Includes 10 year
limited tank warranty.
1
■ 1
⁄
" full port ball type drain valve.
4
■ Stainless steel cabinet.
■ Set of four 6" adjustable (2 locking) casters.
■ Twin fry baskets with plastic coated handles.
■ Hi-limit shut-off.
■ Electronic matchless ignition.
■ Tank brush and clean-out rod.
■ One year limited parts and labor warranty.
ACCESSORIES
FRYMATE-VX21S add-on frymate.
Stainless steel tank cover – doubles as a work surface top.
Connecting Kit(s) – Connects two fryers together (brackets,
grease strip and hardware included).
Single large basket – 183⁄4"w x 171⁄4"d x 51⁄2"h.
Set of twin baskets – 83⁄4"w x 163⁄4"d x 6"h.
3
⁄4" Flexible gas hose with quick disconnect.
10" high stainless steel removable splash guard.
The 1VK85 Series fryer does not require any special adjustments
OPTIONS
for varying altitudes ranging from 0 - 10,000 feet for either Natural
or Propane gas.
a divisi on of ITW F ood Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F4 5 3 67 (10 /11 )
Second year extended limited parts and labor warranty
INSTALLATION INSTRUCTIONS
FRYERS
1VK85 SERIES
FREE STANDING GAS FRYER
1. A combination valve with pressure regulator is provided with
this unit. Natural Gas 4.0" (102 mm) W.C. Propane Gas 10.0"
(279 mm) W.C.
2. An adequate ventilation system is required for Commercial Cooking
Equipment. Information may be obtained by writing to the National
Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
When writing refer
to NFPA No. 96.
3. All models require a 6" (152 mm) clearance at both sides and rear
adjacent to combustible construction. All models require a 16"
(407 mm) minimum clearance to adjacent open top burner units.
4. This appliance is manufactured for commercial installation only and
is not intended for home use.
SERVICE CONNECTIONS:
1⁄2" (13 mm) ID and 3⁄4" (19 mm) OD rear gas connection.
NEMA 5-15P 120 Volt cord & plug supplied with fryers.
NOTE: In line with its policy to continually improve its product,
Vulcan reserves the right to change materials and specications
without notice.
MODEL Width Depth
1VK8 5A
1VK8 5D
1VK85C
21" 343⁄8" 471⁄8" 361⁄4" 19.5" x 18" 90,000 85 - 90 lbs. 265 lbs.
Overall
Height
Working
Height Tan k Si z e BTU/hr.
Fry Comp.
Capacity
Approx.
Shipping Weight
This appliance is manufactured for commercial use only and is not intended for home use.
a divisi on of ITW F ood Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F4 5 3 67 (10 /11 )
Loading...