Vulcan-Hart 1T4024D Specifications

Item # __________________________

MODEL 1T4024D

C.S.I. Section 11420

40 QUART DIRECT STEAM TILTING
KETTLE ON CABINET BASE

STANDARD FEATURES

2

/3 jacketed direct steam tilting kettle, 40 quart capacity.

■

■ Steam jacketed kettle mounted on (18") (28") high base

cabinet with stainless steel frame, front full height door,
stainless steel side and aluminized rear panel with 6"
adjustable legs with flanged feet for anchoring.

■ Fully welded hemispheric bottom kettle with type 304 stain­less steel jacket and type 316 stainless steel liner. Jacket
tested to 50 psi (3.4 kg/cm
flow at 15 psi at the kettle.

■ 12" single temperature deck mounted faucet.

■ Includes safety pop-off valve, pressure reducing valve and

steam control valve on right trunnion leg.

■ One year limited parts and labor warranty.

OPTIONS

2

). Requires 22 lbs./hr. steam

Vulcan-Hart Co.

ISO9001

A2780

MODEL: 1T4024D

SPECIFICATIONS:

2

/3 jacketed direct steam tilting kettle, 40 quart capacity,
Vulcan-Hart Model No. 1T4024D. Steam jacketed kettle
mounted on (18") (28") high base cabinet with stainless steel
frame, front full height door, stainless steel side and alumi­nized rear panel with 6" adjustable legs with flanged feet for
anchoring. Fully welded hemispheric bottom kettle with type
304 stainless steel jacket and type 316 stainless steel liner.
Jacket tested to 50 psi (3.4 kg/cm

2

). Requires 22 lbs./hr. of
steam flow at 15 psi at the kettle. 12" single temperature
deck mounted faucet. Includes safety pop-off valve, pressure
reducing valve and steam control valve on right trunnion leg.

Exterior dimensions: 24"w x 35.4"d x (18") (28")h on 6" adjust­able legs.

Classified by U L to NSF Std. #4. Meets ASME code.

■■ Correction package.

- Cabinet door with hasp (lock by others).

- Security type tamper resistant fasteners.

■■ Tilting kettle strainer.

■■ Pressure reducing valve if steam supply exceeds 50 psi.

■■ 12" dual temperature faucet.

■■ Mount and interconnect kettle with boiler base at factory.

Includes steam supply piping. Shipped on one skid.

■■ Second year extended limited parts and labor warranty.

ACCESSORIES

■■ Stainless steel back panel.

■■ Lift-off cover.

■■ Contour measuring strip.

■■ Single perforated stainless steel basket.

■■ Ball float trap.

■■ Pressure reducing valve.

40 Quart Direct Steam Tilting Kettle on Cabinet Base

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

F-32385 (2-06)

502-778-2791 QUOTE & ORDER FAX: [phone]

MODEL 1T4024D

40 QUART DIRECT STEAM TILTING
KETTLE ON CABINET BASE

DIRECT STEAM DATA:

Steam supply to the kettle must:

1. Maintain a steady 13 psi flow under operating conditions.

2. Have a minimum flow rate of 22 lbs. (0.6 BHP)/hr., dry steam.

3. Be adequately trapped to provide dry steam. (See ball float trap.)

EQUIPMENT CLEARANCE:

Rear: 2" Right: 0" Left: 0"

CAPACITIES (in 4 oz. servings):

40 quarts / 10 gallons / 37.5 liters - 320 servings

SERVICE CONNECTIONS:
A Steam Supply Connection: 3/4".
B Drain: Condenser box, compartment and boiler,11/4" NPT. (Provide an

open air gap type drain within 12" of condenser box and for best results
at a distance so that steam vapors will not enter the steamer from
underneath the control area. Do not connect solidly to any drain
connection.)

C Water Supply Connection for Kettle Filler Faucet: 1/4" NPT.

NOTE:

• Dimensions which locate the above connections have a tolerance of
+ or -3" (+ or -75 mm).

• Installation of backflow preventers, vacuum breakers and other specific
code requirements is the responsibility of the owner and installer. It is
the responsibility of the owner and installer to comply with local codes.

• Plastic drains are not recommended due to inherent limited tempera­tures of the plastic. Boiler purge temperatures may exceed 180°F. The
installer may be required to provide means to reduce boiler purge water
temperature to be that of the condensate temperature of 140°F or less.

• This appliance is manufactured for commercial installation only and is
not intended for home use.

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.

F-32385 (2-06)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

Printed On Recycled Paper