Item # __________________________
C.S.I. Section 11420
MODEL 1T2018D
24 QUART TILTING STEAM KETTLE ON CABINET BASE
■■ 1T2018D – 18" wide
STANDARD FEATURES
■ One 2/3 jacketed tilting steam kettle, 24 quart capacity.
■ Steam jacketed kettle mounted on 28" high base cabinet with
stainless steel frame, front full height door, stainless steel
side rear panel with 6" adjustable legs with flanged feet for
anchoring.
■ Fully welded hemispheric bottom kettle with type 304 stainless
steel jacket and type 316 stainless steel liner. Jacket tested
to 50 psi (3.4 kg/cm
hour at the kettle.
■ Steam control valve on right trunnion leg.
■ 12" single temperature deck mounted faucet.
■ One year limited parts and labor warranty.
2
). Requires 21 lbs./hr. of steam flow per
Vulcan-Hart Co.
ISO9001
A2780
MODEL: 1T2018D
SPECIFICATIONS:
One 24 quart
wide cabinet base, Vulcan-Hart Model No. 1T2018D. Steam
jacketed kettle mounted on 28" high base cabinet with stainless
steel frame, front full height door, stainless steel side rear panel
with 6" adjustable legs with flanged feet for anchoring. Fully
welded hemispheric bottom kettle with type 304 stainless steel
jacket and type 316 stainless steel liner. Jacket tested to 50 psi
(3.4 kg/cm
Steam control valve on right trunnion leg. 12" single temperature
deck mounted faucet.
Exterior dimensions: 18"w x 35.4"d x 28"h on 6" adjustable legs.
Overall height to the lip of the kettle 47
561/4".
2
/3 jacketed tilting steam kettle mounted on a 18"
2
). Requires 21 lbs./1 hr. of steam flow at the kettle.
1
/2", to the top of the handle
OPTIONS
■■ Correction package.
- Cabinet door with hasp (lock by others).
- Security type tamper resistant fasteners.
■■ Tilting kettle strainer.
■■ 12" dual temperature faucet.
■■ Mount and interconnect kettle with boiler base at factory.
Includes steam supply piping. Shipped on one skid.
■■ Second year extended limited parts and labor warranty.
ACCESSORIES
■■ Lift-off cover.
■■ Contour measuring strip.
■■ Single perforated stainless steel basket.
■■ Ball float trap.
■■ Pressure reducing valve.
24 Quart Tilting Steam Kettle on Cabinet Base
Classified by UL to NSF Std. #4. Meets ASME code.
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
F-31680 (2-06)
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
MODEL 1T2018D
24 QUART TILTING STEAM KETTLE ON CABINET BASE
DIRECT STEAM DATA:
Steam supply to the kettles must:
1. Maintain a steady 13 psi flow under operating conditions.
2. Have a minimum flow rate of 21 lbs. (.6 BHP)/hr., dry steam.
3. Be adequately trapped to provide dry steam. (See ball float trap).
EQUIPMENT CLEARANCE:
Rear: 2" Right: 0" Left: 0"
CAPACITIES (in 4 oz. servings):
24 quarts / 6 gallons / 22.5 liters - 192 servings.
SERVICE CONNECTIONS:
S Steam Supply Connection: 3/4" NPT.
D Drain: Condenser box, compartment and boiler, 2" NPT. (Provide an
open air gap type drain within 12" of condenser box and for best
results at a distance so that steam vapors will not enter the steamer
from underneath the control area. Do not connect solidly to any drain
connection.)
1
W Water Supply Connection for kettle filler faucet:
NOTE:
• Dimensions which locate the above connections have a tolerance of
+ or -3" (+ or -75 mm).
• Installation of backflow preventers, vacuum breakers and other
specific code requirements is the responsibility of the owner and
installer. It is the responsibility of the owner and installer to comply with
local codes.
• Plastic drains are not recommended due to inherent limited temperatures of the plastic. Boiler purge temperatures may exceed 180°F.
The installer may be required to provide means to reduce boiler purge
water temperature to be that of the condensate temperature of 140°F
or less.
• This appliance is manufactured for commercial installation only and
is not intended for home use.
/4" NPT.
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-31680 (2-06)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Printed On Recycled Paper
Loading...