Item # __________________________
C.S.I. Section 11420
VH3616E
ELECTRIC HEATED CONVECTION STEAMER
ON CABINET BASE
■■ VH3616E 36" wide base
STANDARD FEATURES
■ Two stainless steel cooking compartments with coved interior
corners. Each compartment accepts sixteen 1" deep, eight
1
2
/2" deep or four 4" deep 12" x 20" pans.
1
■ 1
/4" drain in each compartment.
■ Heavy duty stainless steel "slammable" doors can be opened
and closed at anytime during the cooking cycle. Steam shuts
off when door(s) are opened.
■ Steamer mounted on 28" high base cabinet with stainless
steel frame, front full height doors, slip-off stainless steel
sides and aluminized rear panel with 6" adjustable legs with
flanged feet for anchoring.
■ 42/48 KW electric steam boiler builds 4/4.6 BHP. Includes
CSD-1 compliant high pressure limit switch (15 psi), low
water cut-off, automatic water fill, automatic boiler blowdown,
15 psi pressure relief valve and 15 psi kettle connection.
1
■ Service connections include
boiler feed and
1
/2" cold water condenser and 11/4" drain
connection.
■ One year limited parts and labor warranty.
/2" cold water connection for
Vulcan-Hart Co.
ISO9001
A2780
MODEL: VHLE SERIES
SPECIFICATIONS:
Electric heated convection steamer, Vulcan-Hart Model No.
VH3616E. Two stainless steel cooking compartments with coved
interior corners. Each compartment accepts sixteen 1" deep,
1
eight 2
/2" deep or four 4" deep 12" x 20" pans. 11/4" drain in each
compartment. Heavy duty stainless steel "slammable" doors
can be opened and closed at anytime during the cooking cycle.
Steam shuts off when door(s) are opened. Steamer mounted on
28" high base cabinet with stainless steel frame, front full height
doors, slip-off stainless steel sides and aluminized rear panel with
6" adjustable legs with flanged feet for anchoring. 42/48 KW
steam boiler builds 4/4.6 BHP. Includes CSD-1 compliant high
pressure limit switch (15 psi), low water cut-off, automatic water
fill, automatic boiler blowdown, 15 psi pressure relief valve and
15 psi kettle connection. Service connections include:
connection for boiler feed and
1
1
/4" drain connection.
1
/2" cold water condenser and
1
/2" water
Exterior dimensions:
36"w x 35
7
/16"d x 66"h.
UL listed. UL classified to Canadian safety standards. Classified
by U L to NSF Std. #4. Meets ASME code.
OPTIONS
■■ Correction facility package:
a. Cabinet door with hasp (lock by others).
b. Security type tamper resistant fasteners.
c. Control cover (lock by others).
■■ Second year extended limited parts and labor warranty.
ACCESSORIES
■■ Water treatment system.
■■ Stainless steel back panels.
■■ Removable 12 x 20 sliding shelf (Qty.____).
Super Steamer, Electric Boiler
F-32614 (5-04)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
VH3616E
ELECTRIC HEATED CONVECTION STEAMER
ON CABINET BASE
SERVICE CONNECTIONS:
ELECTRICAL CONNECTION: Junction box for electrical con-
nection for boiler heat and controls.
DRAIN: Condenser box, compartment and boiler, 11/2" NPT.
(Provide an open air type drain within 12" of condenser box and
for best results at a distance so that steam vapors will not enter
the steamer from underneath the control area. Do not connect
solidly to any drain connections.)
COLD WATER CONNECTION: 1/2" NPT for boiler feed. Inlet
water pressure between 20 and 80 psi.
COLD WATER CONNECTION: 1/2" NPT for condensate box.
Inlet water pressure between 20 and 80 psi.
WATER: For swing faucet, (single) (dual) temperature 1/4" IPS
tailpiece.
STEAM TAKE-OFF CONNECTION: 3/4" NPT.
Total
Conn.
KW 208 240 480 380/50/60, 4 wire 208 240
42 118 N/A N/A N/A N/A N/A
48 N/A 116 58 62 N/A N/A
PAN CAPACITIES (Per compartment)
NOMINAL AMPS PER LINE
Three Phase Single Phase
1" deep 21/2" deep 4" deep
16 8 6
NOTE:
• Dimensions which locate the above connections have a tolerance of
+ or -3" (+ or -75 mm).
• Installation of backflow preventers, vacuum breakers and other specific
code requirements is the responsibility of the owner and installer. It is
the responsibility of the owner and installer to comply with local codes.
• Plastic drains are not recommended due to inherent limited temperatures of the plastic. Boiler purge temperatures may exceed 180°F. The
installer may be required to provide means to reduce boiler purge water
temperature to be that of the condensate temperature of 140°F or less.
• This appliance is manufactured for commercial installation only and is
not intended for home use.
WATER QUALITY STATEMENT:
The fact that a water supply is potable is no guarantee that it is suitable for
steam generation. Your water supply must be within these general
guidelines:
SUPPLY PRESSURE 20 - 60 psig
HARDNESS* less than 3 grains
SILICA less than 13 ppm
TOTAL CHLORIDE less than 4.0 ppm
pH RANGE 7-8
UN-DISSOLVED SOLIDS less than 5 microns
* 17.1 ppm = 1 grain of hardness
Other factors affecting steam generation are iron content, amount of
chloridation and dissolved gases. Water supplies vary from state to state
and from locations within a state. Therefore it is necessary that the local
water treatment specialist be consulted before the installation of any
steam generating equipment.
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32614 (5-04)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Printed On Recycled Paper