Vulcan GH60TS User Manual

Model GH60

Shown with single deck high shelf

SPECIFICATIONS

Heavy duty griddle top gas range with oven, Vulcan-Hart Model
No. GH60. Stainless steel body and 6" adjustable legs.
Sides nished in heat resistant paint. 1
manifold.
splashers and 5
Front grease trough with removable grease collector. Pilot
ignition system. Heat absorbent ceramic re brick and griddle
leveling bolts. Oven interior measures 26"w x 28"d x 14"h.
Porcelain enamel on steel hearth, door, adn side liners. One rack
and two rack positions. 50,000 BTU/hr. heavy cast “Flame
Retention" burner with pilot ignition. Thermostat adjusts from
150° to 500°F. Controls located in the cool zone.

Exterior dimensions: 34"w x 39
6" legs.

CSA design certied. NSF listed.

SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.

SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.

3

⁄4" polished steel griddle plate with 4" side

5

⁄8" rear splasher. Four 20,000 BTU/hr. burners.

1

⁄4" diameter front gas

1

⁄8"d x 36" working height on

Item # __________________________

MODEL GH60T

GRIDDLE TOP HEAVY DUTY GAS RANGE

GH60T Standard Oven, Thermostatic Control
GH60TC Convection Oven
GH60TS Storage Base

STANDARD FEATURES

Stainless steel body and 6" adjustable legs.

1

1

⁄4" diameter front gas manifold.

3

⁄4" polished steel griddle plate with 4" side splashers and

5

⁄8

" rear splasher. Four 20,000 BTU/hr. burners.

5
trough with removable grease collector. Pilot ignition
system. Heat absorbent ceramic re brick and griddle levening
bolts.

Oven controls located in the cool zone.

Oven interior measures 26"w x 28"d x 14"h. Porcelain
enamel on steel hearth, door and side liners. One oven rack
and two rack positions. 50,000 BTU/hr. "Flame Retention"
burner with pilot ignition. Thermostat adjusts from 150° to
500°F.

One year limited parts and labor warranty.

OPTIONS

Snorkel
sux "C" to the model number. Porcelain enamel on steel
interior measures 26
racks and ve rack positions. 32,000 BTU/hr. burner with pilot
ignition. Thermostat adjusts from 200° to 500°F. 1⁄4 H.P.
blower motor with 7 foot power cord and plug. 120/60/1,
5 amps.

Cabinet storage base in place of standard oven. Add the
sux "S" to the model number.

Stainless steel back nishing panel.

Cap and cover manifold end(s). (No charge.)

15⁄8" stainless steel toe base - 315⁄8" working height.

Set of four 5" diameter casters, two locking.

Stainless steel dolly frame with casters, up to 102" wide.

Cooling fan for Snorkel
when unit is installed with a back nishing panel

Rear gas connection. (Reference spec sheet F-31525.)

Second year extended limited parts and labor warranty.

TM

convection oven in place of standard oven. Add

or a toe base.

1

⁄8"w x 223⁄32 "d x 141⁄8"h. Three oven

TM

convection oven motor. Required

C.S.I. Section 11420

Front grease

.oC traH-nacluV

M
O
D

E
L

:

G
H

6
0
T

G
r

i

d
d
l

e

T
o

p

H
e

a
v

y

D
u

t
y

G
a

s

R
a

n
g
e

0872A

1009OSI

F-31514 (05-06)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

MODEL GH60T

GRIDDLE TOP HEAVY DUTY GAS RANGE

ACCESSORIES

17" high stainless steel backguard. (Common backguards
available up to 102" wide.)

23" high stainless steel single deck high shelf. (Common
high shelves available up to 72" wide.)

35" high stainless steel double deck high shelf. (Common
high shelves available up to 72" wide.)

Additional oven rack(s).
Gas pressure regulator (specify size and type of gas).
Flexible gas hose with quick disconnect and restraining

device. Consult price book for available sizes.

LESS LEGS

IMPORTANT

1. A gas pressure regulator suitable for battery or single unit
application must be furnished and installed. Natural gas 6.0"
W.C., propane gas 10.0" W.C.

2. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing
to the National Fire Protection Association, Batterymarch
Park, Quincy, MA 02269. When writing refer to NFPA No. 96.

3. These units are manufactured for installation in accordance
with ANSZ223.1a (latest edition), National Fuel Gas Code.
Copies may be obtained from the American Gas Association,
1515 Wilson Blvd., Arlington, VA 22209.

4. All models require a 6" (152 mm) clearance at both sides and
rear adjacent to combustible construction.

5. For proper ueing a backguard or high shelf must be installed
with each unit. Please refer to spec sheet F31537 for specic
styles and sizes.

6. This appliance is manufactured for commercial installation
only and is not intended for home use.

FRONT VIEW

GH60 & GH60L

SIDE VIEW GH60

TOP VIEW

CABINET BASE

MODEL

GH60T

GH60TC

GH60TS

GH60S

TOP: 80,000

TOP: 80,000

TOP: 80,000

GAS RATED INPUT BTU/hr.

OVEN: 50,000

OVEN: 32,000

_________

SIDE VIEW GH60L

TOTAL: 130,000

TOTAL: 112,000

TOTAL: 80,000

WIDTH DEPTH

1

34

"

⁄

39 36

WKG. HEIGHT APPX.SHP.WT.

720 lbs./327kg

8

"

"

790 lbs./354kg

535 lbs./243kg

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and

specications without notice.

F-31514 (05-06)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

Printed On Recycled Paper