Vulcan GH45S User Manual

Model GH45

Shown with 17" backguard and casters

SPECIFICATIONS

Heavy duty four burner gas range with oven, Vulcan-Hart Model
No. GH45. Stainless body and 6" adjustable legs. 1
front gas manifold. Four 30,000 BTU/hr. heavy cast two piece “Flame
Retention” burners with individual pilots and control valves.
Heavy cast iron aeration plates with deep bowls and removable
cast top grates. Oven interior measures 26"w x 28"d x 14"h.
Porcelain enamel on steel hearth, door and side liners. One
oven rack and two rack positions. 50,000 BTU/hr. heavy cast
“Flame Retention” burner with pilot ignition. Thermostat adjusts
from 150° to 500°F. Controls located in the cool zone.

Exterior dimensions: 34"w x 39
6" legs.

CSA design certied. NSF listed.

SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.

SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.

1

⁄8"d x 36" working height on

1

" diameter

4

⁄

Item # __________________________

MODEL GH45

OPEN BURNER HEAVY DUTY GAS RANGE

GH45 Standard Oven
GH45C Convection Oven
GH45S Storage Base

STANDARD FEATURES

Stainless steel body and 6" adjustable legs.

1

1

⁄4" diameter front gas manifold.

Four 30,000 BTU/hr. "Flame Retention" burners. Individual
pilot for each burner.

Heavy cast iron aeration plates with deep bowls and
removable cast top grates.

Oven controls located in the cool zone.

Oven interior measures 26"w x 28"d x 14"h. Porcelain
enamel on steel hearth, door and side liners. One oven rack
and two rack positions. 50,000 BTU/hr. "Flame Retention"
burner with pilot ignition. Thermostat adjusts from 150° to
500°F.

One year limited parts and labor warranty.

OPTIONS

SnorkelTM convection oven in place of standard oven. Add
sux “C” to the model number. Porcelain enamel on steel
interior measures 261/8"w x 223/32"d x 141/8
racks and ve rack positions. 32,000 BTU/hr. burner with pilot
ignition. Thermostat adjusts from 200° to 500°F. 1⁄4 H.P.
blower motor with 7 foot power cord and plug. 120/60/1,
5 amps.

Cabinet storage base in place of standard oven. Add the
sux “S” to the model number.

Stainless steel back nishing panel.

Common front top ledge up to 68" wide. (Not for use on
griddle tops, spreader plates and deep fat fryers.)

Cap and cover manifold end(s). (No charge.)

5

1

⁄8" stainless steel toe base - 315⁄8" working height.

Set of four 5" diameter casters, two locking.

Stainless steel dolly frame with casters, up to 102" wide.

Cooling fan for Snorkel

when unit is installed with a nishing panel or on a toe base.

3

Rear gas connection (Refer to spec sheet F-31525).

⁄4

Second year extended limited parts and labor warranty.

TM

convection oven motor. Required

C.S.I. Section 11420

"h. Three oven

.oC traH-nacluV

M
O
D

E
L

:

G
H

4
5

O
p

e
n

B
u

r
n

e
r

H
e

a
v

y

D
u

t
y

G
a

s

R
a

n
g
e

0872A

1009OSI

F-31511 (05/06)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

MODEL GH45

OPEN BURNER HEAVY DUTY GAS RANGE

ACCESSORIES

17" high stainless steel backguard. (Common backguards
available up to 102" wide.)

23" high stainless steel single deck high shelf. (Common
high shelves available up to 72" wide.)

35" high stainless steel double deck high shelf. (Common
high shelves available up to 72" wide.)

Additional oven rack(s).
Gas pressure regulator (specify size and type of gas).
Flexible gas hose with quick disconnect and restraining

device. Consult price book for available sizes.

LESS LEGS

IMPORTANT

1. A gas pressure regulator suitable for battery or single unit
application must be furnished and installed. Natural gas 6.0"
W.C., propane gas 10.0" W.C.

2. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing
to the National Fire Protection Association, Batterymarch
Park, Quincy, MA 02269. When writing refer to NFPA No. 96.

3. These units are manufactured for installation in accordance
with ANSZ223.1a (latest edition), National Fuel Gas Code.
Copies may be obtained from the American Gas Association,
1515 Wilson Blvd., Arlington, VA 22209.

4. All models require a 6" (152 mm) clearance at both sides and
rear adjacent to combustible construction.

5. For proper ueing a backguard or high shelf must be installed
with each unit. Please refer to spec sheet F31537 for specic
styles and sizes.

6. This appliance is manufactured for commercial installation
only and is not intended for home use.

TOP VIEW

GH45 & GH45C

FRONT VIEW

GH45 SIDE VIEW

GH45S

FRONT VIEW

GH45C SIDE VIEW

MODEL GAS RATED INPUT BTU/hr.

GH45

GH45C TOP: 120,000

GH45S

TOP: 120,000 OVEN: 50,000 TOTAL: 170,000

OVEN: 32,000

TOP: 120,000

______

TOTAL: 152,000

TOTAL: 120,000

WIDTH DEPTH WKG. HEIGHT APPX. SHP. WT.

570 lbs./299 kg

1

⁄

34” 39

8

" 36” 630 lbs./326 kg

420 lbs./199 kg

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specications without notice.

F-31511 (05/06)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

Printed On Recycled Paper