Vu 60 cms (24”) LED TV
Model: 24D2100
www.vutvs.com
Before using the TV, please read this manual
thoroughly and retain it for future reference. For
more detailed instructions, please see the User Manual.
USER GUIDE
English
Warning
REGULATORY INFORMATION
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
CAUTION
DO not attempt to modify this product in any way without written authorization
from supplier. Unauthorized modification could void the user's authority to operate
this product.
It is not recommended to keep a certain still image displayed on the screen for a
long time as well as displaying extremely bright images on screen.
Figures and illustrations in this User Manual are provided for reference only
and may differ from actual product appearance. Product design and
specifications may be changed without notice.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1
Warning
WARNING
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To
Rain Or Moisture.
The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
The Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Attention should be drawn to the environmental aspects of battery disposal. Don’t
throw used batteries in dustbin. Please contact your retailer in order to protect the
environment.
When you install your TV, maintain a distance of at least 4 inches between the TV
and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to
maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
The device may be malfunction when under electrostatic discharge. It can be
manually resumed by power off and power on again.
CAUTION connecting the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that appliance and has no additional outlets
or branch circuits.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits the appliance.
The MAINS plug is used as the disconnect device, and the disconnect device shall
remain readily operable.
Operating Temperature: 5°C to 35°C Operating Humidity: ≤80%
Storage Temperature: -15°C to 45°C Storage Humidity: ≤90%
This equipment is a Class Ⅱ or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to
electrical earth.
2
Safety instructions
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
7. Do not block any of the ventilation
openings. Install in accordance with
the manufacturer's instructions.
5. Do not use this apparatus near water.
8. Do not install near any heat source
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
6. Clean only with a dry cloth.
9. Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong is provided for your
safety. When the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
3
Safety instructions
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles,
and the point where they exit from
the apparatus.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
11. Only use the attachments/
accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been
dropped.
ON DISPOSAL
-Do not dispose of this product with general household waste.
-Disposal of this product must be carried out in accordance to the regulations of
your local authority.
NOTE
-If the TV feels cold to the touch, there may be a small "flicker" when it is turned
on. This is normal; there is nothing wrong with TV.
-Some minute dot defects may be visible on the screen, appearing as tiny red,
green, or blue spots. However there has no adverse effect on the monitor's
performance.
-Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effect on the screen.
4
Getting Started
Stand Installation
5
Getting Started
Using the remote control
When using the remote control, aim it at remote sensor on the television. If there is an
object between the remote control and the remote sensor on the unit, the unit may not
operate.
Point the remote control at the REMOTE SENSOR located on the television.
When using this television in a very brightly lit area, the infrared REMOTE CONTROL
SENSOR may not work properly.
The recommended effective distance for using the remote control is about 7 meters.
Installing Batteries in the Remote Control
1. Open the cover at the back of the remote control.
2. Install two AAA size batteries. Make sure to match
the “+” and “-” ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Battery replacement
You will need to install the batteries into the remote control to make it operate following
the instruction below.
When the batteries become weak, the operating distance of the remote control will be
greatly reduced and you will need to replace the batteries.
Notes on Using Batteries:
The use of the wrong type of batteries may cause chemical leakage and/or explosion.
Please note the following:
Always ensure that the batteries are inserted with the + and - terminals in the correct
direction as shown in the battery compartment.
Different types of batteries have different characteristics. Do not mix different types.
Do not mix old and new batteries. Mixing old and new batteries will shorten battery
life and/or cause chemical leakage.
Replace batteries as soon as they do not work.
Chemicals which leak from batteries may cause skin irritation. If any chemical matter
seeps out of the batteries, wipe it up immediately with a dry cloth.
The batteries may have a shorter life expectancy due to storage conditions. Remove
the batteries whenever you anticipate that the remote control will not be used for an
extended period.
The batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
It may result in an explosion if batteries are replaced incorrectly.
Only replace batteries with the same or equivalent type.
6
Connection and setup
Cable Installation
installation and use.
1. Take out the TV from the package and put it in a drafty and flat place.
NOTE:
signal cable, please hold the plug (the insulated part), do not draw the body
of the cable.
2. The RF output terminal can be connected with the RF input port of the TV.
3. The output AV terminal of DVD can be connected with the AV input port of the TV
through
AV cable.
NOTE:
4. The output COMPONENT (YPbPr) terminal of DVD can be connected with the
COMPONENT (YPbPr) input port of the TV through AV cable.
5. Connect one end of the VGA cable with the VGA port on computer, connect the other
end
each end of VGA cable.
NOTE:
the pin might be broken.
HDMI cable with the HDMI port on the TV.
NOTE:
the pin might be broken.
8. Sending the TV's audio signal to external audio equipment via the Digital Audio
Output port.
9. Check and make sure that all AV cables are connected with the corresponding ports
correctly.
10. Connect the power cable with 100-240V~ power supply.
NOTE:
The range of power input for the TV is 100-240V~ 50/60Hz; do not connect the TV
power input port with the power cable out of the above range.
not touch directly the metallic part of the cable.
7. The AV output of the TV can be connected with the input port of other AV equipment
through AV cable.
NOTE:
Please read the relevant content in “Warning and Safety instructions” carefully before
the
When you plug or unplug the TV, computer or other equipment, you must make
sure
that the power cable has been already shut down; when unplugging the power
cable or
Component and AV can not be used at same time for they share of one audio
channel.
of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on
the
While connecting the 15-pin VGA, please do not insert the plug overexerted, for
fear
6. Connect one end of the HDMI cable with HDMI output port; connect the other end of
the
While connecting the HDMI, please aim at carefully, do not insert overexerted, for
fear
Please hold the insulated part of the plug when you are unplugging the power cable,
do
If COMPONENT (YPbPr) and AV works as mini terminal, and shared same audio,
please choose to use a one-to-three audio&video cable.
¾ AV OUT can output only TV channels' audio/video signal.
7
Remote Control
The buttons of the original remote control are as following:
NOTE:
All pictures in this manual are examples, only for reference, actual product may differ
from the pictures.
The buttons not mentioned here are not used.
1
2
3
4
5
I/II
i
?
6
7
8
11
12
13
16
17
18
19
20
9 9
10
10
14
15
Definition of the buttons on remote control:
1. POWER: Enter or quit the standby mode.
2. INFO: Show info of current program.
3. : Mute or restore sound.
5. SOURCE: Select signal source.
screen menus or to quit some operations.
6. MENU: Press to display/disappear the on
4. NUMBER BUTTONS: C hoose
channels or password importation.
7. EXIT:
Quit the current interface.
8. ENTER: Select or confirm menu item.
9. ◄/►: Select direction.
10. ▲/▼: Select direction.
11. REPEAT: Press to select the repeat play
mode. (in USB mode)
13. VOL+/VOL-: Increase/Decrease audio
volume.
15.
: Press to display the Favourites
your favourite channels in Program Edit
menu)
16.
source.
Red/green/yellow/blue key navigation link.
: Fast reverse (in USB mode)
: Previous (in USB mode)
: Next (in USB mode)
18. STILL: Freeze or activate the current
picture.
: Stop (in USB mode)
19.
: Play / Pause (in USB mode)
: Adjust displayable aspect ratio.
20.
12. CH+/CH-: Scroll to next/previous channel.
14. SLEEP: Set the sleep timer.
program in TV mode.(You should setup
: Return to last viewed program/signal
17. COLOR BUTTONS:
: Fast forward (in USB mode)
Press again to exit.
LIST: Press to call up the channel list.
8
Main Unit Control
Front & Sides Panel
CH+/CH-: Change the TV channels.
VOL+/VOL-: Adjust the volume level.
: To switch among the signal source.
Open the menu.
: Turns the unit on and off.
MENU:
9
Main Unit Control
Rear Panel
HDMI: HDMI input.
PC/ PC/DVI AUDIO: PC input.
COMPONENT: Component input.
AV: AV audio/video signal input .
AV OUT: AV audio/video signal output.
ANT: Antenna input.
USB: USB port.
:
Ear phone output.
10
Basic Operation
Turning on and off the TV
• Turn on the TV
Connect the power cable. If TV has a power switch, turn it on firstly. Press the
button on remote control can turn on TV from standby mode.
• Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control
Press CH+ to increase channel number.
Press CH- to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In TV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume adjustment
• Press the VOL+/- button to adjust the volume.
• If you want to switch the sound OFF, press the
.
• You can release mute by pressing the or increase the volume.
Changing the Input Source
You can select the input source by pressing the SOURCE button on the remote control.
Press the▲/▼button to cycle through the input source, and press the ENTER button to
confirm your choice.
if there is no signal in 5 minutes, the TV will turn off automatically. In PC mode, the TV
set will automatically turn off in 30 seconds if no input signals. When VGA cable is
There is No Signal menu on screen when there is no input signal. In TV mode,
11
Basic Operation
How to Navigate Menus
Please before using the TV follow the steps below to learn how to navigate the menu in
order to select and adjust different functions. The access step may differ depending on
the selected menu.
1. Press the MENU button to display the main menu.
2. Press the▲/▼button to select the desired sub item.
3. Press the ► button to access the submenu.
4. Press the ▲/▼/◄/► button to select the desired value. The adjustment in the
OSD may differ depending on the selected menu.
5. Press the MENU button to return to the previous menu.
6. Press the EXIT button to exit from the menu.
NOTE:
When an item in MENU is displayed gray, it means that the item is not available or
cannot be adjusted.
Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or couldn’t work, you may use the buttons on the
TV to select menus. This manual focuses on operation of the remote control.
Some items in the menus may be hidden depending on modes or signal sources
used.
Configuring the Picture Menu
• Picture Mode
You can select the type of picture
which best corresponds to your
viewing requirements.
Color
adjusted when the picture mode is
set to User.
The manufacture's
recommendation mode is
• Brightness
Adjusts the base level of the signal in the picture.
• Contrast
Adjusts the signal level between
black and white in the picture.
Brightness,
Contrast,
Sharpness
,
and
Tint (NTSC)
can be
• Color
Adjusts intensity of all colors.
• Tint (Only in the NTSC mode)
Adjusts the balance between red and green levels.
Standard.
12
Menu Operation
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the
picture.
• Aspect Ratio
You can select the picture size which best corresponds to your viewing requirements.
• Backlight
To control the brightness of the screen, adjust the brightness of panel.
• Color Temperature
press the
▲
/
▼
• Noise Reduction
Press the
▲
/▼ button to select the Low, Middle,High,Off.
Configuring the Sound Menu
• Sound Mode
You can select a sound mode to
suit your personal preferences.
when the sound mode is set to
User.
• Balance
• Auto Volume
Press the
▲
/
▼
• SPDIF MODE
Press the
▲
/
▼
Select the color temperature of the picture, and
button
to select
the Cool,Medium,Warm.
can be adjusted
Items
You can adjust the sound balance
of the speakers to preferred levels.
button to select On
or Off.
button to select
PCM,Auto,Off.
13
Menu Operation
• OSD Language
• OSD Transparency
Select your preferred On Screen
Display language.
Configuring the Menu
• OSD Timer
Option
Select On-Screen Menu
displaying time.
Press the
▲
/▼ button to set the
OSD Transparency.
• Timer setting
▼
Press the ENTER or button
to access the submenu.
Clock:
Press the
▲
/▼ button to select Date,Month,Year,Hour,Minute.
Off Time:
When the Off Time is set to "Off", Hour,Minute can not to be adjusted.
Note:
On Time:
▼
Press the ENTER or
button
to access the submenu.
▲/▼
Set the time for the TV to switch off.
Set the time for your TV to turn on.
– Hour : Press the
▲/▼
button to select 00-23.
▲/▼
– Minute : Press the button to select 00-59.
▲/▼
– Source : Press the button to select the source.
– Volume:
▲/▼
Press the button to select the voice volume.
Sleep Timer:
Press the
▲
/▼ button to set On or Off.
• Reset
Press the
▼
button to reset.
• Software update(USB)
– On Time Sunday :
Press the
Note:
Select the time to turn the TV to standby mode automatically.
Update the TV with the latest software by USB.
button to select : Once,
Every Day,
Mon.~Fri. etc.
can not to be adjusted.
When the On Time is set to "Off", Hour,Minute, Source, Channel, Volume,
▲/▼
Press the button to select channel number.
– Channel.
Press the ENTER or button
to access the submenu.
▼
ENTER
or
• Dynamic Backlight
14
Menu Operation
Configuring the
Menu
Channel
• Auto Tuning
Press the ENTER
Auto tuning
which
automatically
scan and
store all available
programmes.
analog scan.
Fine Tune: Press the ◄/► button to
select fine tune.
Color System: Press the
▲/▼
Sound System: Press the ▲/
▼
button to select Sound System.
the submenu.
Current CH: Press the
▼
button to
select current channel.
button
to select Color System.
Search: Press the ◄/► button to select
AFC
: Press the
▲/▼
button to select On or Off.
Press the ENTER button to access
the submenu.
Press ▲/▼ button select items.
Press red button to delete the channel.
Press green button to rename the chan
Press yellow button to move the channel.
Press blue button to skip the channel.
Press
button to set the favorite channel.
The CH+/CH- button can be used to sel
ect the following or
preceding page.
Press the ENTER or the
button to
▼
or
• TV Manual Tuning
button
to access
▼
start
• Programme Edit (Only In TV mode)
15
Menu Operation
Configuring the
Menu
PC
•
•
•
•
•
Key Lock
▲/▼
Lock System
▲/▼
Block Programme
Configuring the
Menu
Set Password
You can set your
private password .
Press the
number buttons on the
remote
control to set the new
password
.
When the new password has been
input
twice, the setting is finished
Press green button to Lock or
Unlock the programme.
•
button to select
•
•
•
Press the
Lock
When the Lock System is On,
Parental Guidance can be adjusted
by users.
successfully.
Press the ENTER button to access
the submenu.
button to select On or Off.
Press the
number buttons on the
remote
control to enter the
password
. Then press the
Lock System
On or Off.
Press the ENTER button to access
the submenu.
Press the
▲/▼
button to select
the programme.
Press the MENU button can exit current interface
.
the ima
ge flickers.
Reset Position
Select to reset.
•
Auto Adjust
Adjust the image automatically.
Size
Adjust the screen size.
Phase
Adjust when characters have low
contrast or when
Horizontal Pos.
Vertical Pos.
Centre the image by moving it up
or down.
Press the ENTER button to access
the submenu.
(In PC mode)
Centre the image by moving it left
or right.
16
• To Access/Quit USB mode
Press the SOURCE button to call up the signal source selection menu. Use the ▲/▼
the signal source selection menu to exit from the USB mode.
NOTE:
Special USB device may not be well supported.
• The formats supported
It can play PHOTO, MUSIC, MOVIE or TEXT files.
Music Format Support: MP3, MP4, M4A（AAC）.
Text Format Support: TXT.
NOTE:
Special algorithm documents may not be well supported by the USB.
The USB supports the format mentioned above, if the file format is not supported,
change it to the given format.
Movie Format Support: MPEG4, AVI,H.264,H.265.
Using USB mode
The USB function can support the USB device with USB memory.
USB max. Load: DC5V 500mA.
Video decoder supports H.264&H.265.
Menu Operation
to highlight Media, and the ENTER button to access the USB mode. You may also
use
Channel List
Press LIST button to display the Channel List.
Press ▲/▼ to select the items. Press the ENTER button to enter the channel.
Press CH+/CH- button to page up or down the Channel list.
Press EXIT button to exit.
• Main Operating Interface
Photo Format Support: JPG, BMP, PNG.
17
Menu Operation
1. Use the ◄/► button to select PHOTO, MUSIC, MOVIE or TEXT. Press ENTER
button enter into sub-menu.
2. Use the arrow buttons and ENTER button to enter the desired disk. Press ENTER
to open the folder.
3. Use the arrow buttons to highlight the file. Use the ENTER button to mark or
unmark a file. Press
button to play the selected files. If no file is marked, all the
files in the folder will be played in sequence after you press
button.
4. Press the INFO button to display the menu screen in playing.
5. Press the
to stop the playing files.
6. Press the EXIT button to return to the previous menu screen.
• Basic operation
1. Play/ Pause
Start playing the selected file of a folder or pause.
2. Stop
Stop the playing files.
3. / Fast Reverse/Fast Forward
You can press / to skip fast reverse or forward.
4. / Previous/Next
You can select the desired files manually in normal condition.
5. Red button
Select a file you want to delete，press the red button to open corresponding menu，
then press
7. CH+/CH- on the TV
In the USB mode, use the CH+/CH- button on the TV as you would use the
Press the CH+/CH- button on the TV for more than 3 seconds to start playing the
selected file.
8. VOL+/VOL- on the TV
When selecting files, use the VOL+/VOL- button on the TV as you would use the ◄/►
button on the remote control.
When playing files, use the VOL+/VOL- button on the TV as you would use the
VOL+/VOL- button on the remote control.
button on the remote control.
◄
/
►
When view the TEXT files, press to change pages up and down.
◄/►
6.
◄/►
◄
► button to retain.
button to delete it, or press
18
Troubleshooting Guide
Troubleshooting
Before contact the service technician, perform the following simple checks. If any
program still persists, unplug the TV and calling for serving.
Symptoms Possible Reason Solutions
No picture, no sound,
and no indicator light on
1.The power cord is not plugged in
2.The power is off
1.Plug the power cord in
2.Turn the power on
Picture and sound with
abnormity
1.Contrast, sharpness, and color
are set improperly
2.Color system is set improperly
3.Sound system is set improperly
1.Adjust the value of
Contrast, sharpness, and
color
2.Set the Color system to
the country broadcasting
standard
3.Set the Sound system to
the country broadcasting
standard
Picture is spotted or with
snow
Signal source is low-grade or the
signal cord is in a lower quality
Use the qualified signal cord
Volume is in the minimum value or
TV is in mute mode.
Adjust the value of volume
No picture, no sound
and indicator light is
green/blue
The signal cable is not correctly
connected.
Connect the signal cable
correctly
There is no signal input or the video
cable is not connected or
incorrectly connected
Connect the video cable
correctly
Picture is unclear or
shaking or with black
horizontal strips (in PC
mode)
PC picture is not
centered
PC picture is not correctly adjusted.
Enter into Screen menu,
select Auto Adjust item to
perform automatic
calibration and adjust Phase
to solve the problem
No sound
There is no audio signal input or
audio cable is not connected
correctly
Connect the audio cable
correctly
PC picture display with
improper color
The color temp is adjusted
incorrectly by user
Readjust the color temp, or
select the original color
setting
HDMI source, with snow
pixel of full screen
The source generate is not
standard
Plug the HDMI cable again
Blue screen, AV is
displayed
19
Troubleshooting Guide
The remote control does
not work
Batteries are improperly installed or
exhausted
1. Make sure the positive
and the negative
polarities are correct.
2.Check if there is a loose
contact between the
batteries and the springs
3.Replace the batteries
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the
amount of time you will have your new TV. Be sure to turn the power off and unplug the
power cord before you begin any cleaning.
Cleaning the screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a
mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring
the cloth until it’s almost dry, and then use it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn
on your TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a
good idea to unplug the power cord to protect against possible damage from
lightning or power surges.
Disposal of old electrical appliances
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery
and recycling of the materials they contain, and reduce the impact on human
health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
20
Note: Specifcations to change without notice. Pictures for reference only, the products
are subject to material object, the power of interpretation belongs to our company.
Specifications
Model Name
24D2100
Dimension
Without Stand
(mm)
Width: 552.6
Height: 338.3
Depth: 50.8
With Stand(mm)
Width: 552.6
Height: 365.9
Depth: 153.1
Weight
Without Stand (kg)
3.2
With Stand(kg)
3.4
Active Screen Size(Diagonal)
23.8inches
Screen resolution
1920 x 1080
Audio power
5W+5W
Power consumption
Please refer to the rating label
Power supply
100-240v~ 50Hz/60Hz
Receiving
systems
Analog
PAL-D/K,B/G,I NTSC-M/N
Digital
None
Environmental
conditions
Temperature:5℃-45℃
Humidity:20%-80% RH
Atmospheric pressure:86kPa-106 kPa
Component Input
480 I/60Hz, 480 P/60Hz, 576I/50HZ,
576P/50Hz,720P/50Hz,720p/60Hz,1080 I/50Hz,
1080 I/60Hz,1080P/50Hz,1080P/60Hz
HDMI Input
60 Hz (640x480, 1024x768)
60Hz(480 I,480P,720P,1080I,1080P)
50Hz(576I,576P,720P,1080I,1080P)
ACCESSORIES:
x1
2. Remote Control x1
3. Stand x1
x1
x1
4. User Manual
5. Stand Setting Paper
1. LED TV
21
Vu 60 cms (24”) LED TV
Model: 24D2100
Vu Technologies Pvt. Ltd.
Vu Center, 29 MIDC Central Road, Andheri (E), Mumbai - 400 093. Maharashtra. India
Helpdesk: Landline: +91-22 - 28305930 Mobile No: +91 - 9322999917 Toll Free No.: 1-800-22-8455
Email: warranty@vutvs.com
w w
www.vutvs.com
Loading...