VTech PULL-N-PLAY PHONE User Manual

Dear Parent:

At VTech® we know that a child has the ability to do great things.

That’s why all of our electronic learning products are uniquely

designed to develop a child’s mind and allow them to learn to the

best of their ability. Whether it’s introducing numbers and letters,

identifying colors and shapes, or stimulating senses with lights

and music, all VTech® infant and toddler learning products

encourage your child’s natural growth and discovery skills.

When it comes to providing electronic learning products that

enlighten, entertain and develop minds, at VTech® we see the

potential in every child.

1

INTRODUCTION

Thank you for purchasing the VTECH® Pull 'n Play™ Phone learning
toy! We at VTECH® are committed to providing the best possible products
to entertain and educate your child. Should you have any questions or
concerns, please call our Consumer Services Department at 1-800-521­2010 in the U.S. or 1-800-267-7377 in Canada.

The VTECH® Pull 'n Play™ Phone is an interactive pull toy for toddlers
12 months and up. Your toddler will be dialin’ and smilin’ while learning
numbers and counting as well as strengthening motor skills. Press the
phone button and surprise, up pops the puppy! Packed with realistic
phone sound effects and friendly phone phrases your little one will put
you “on hold” for hours.

POP-UP PUPPY

NUMBER BUTTONS

PULL CORD

HANDSET

LIGHT-UP PHONE
BUTTON

ON/OFF/ MODE
SELECTOR
SWITCH

2

INCLUDED IN THIS PACKAGE

- One VTECH® Pull 'n Play™ Phone learning toy

- One instruction manual

WARNING: All packing materials, such as tape, plastic sheets, wire

ties and tags are not part of this toy, and should be
discarded for your child’s safety .

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.

2. Locate the battery cover on the bottom of the
unit. Use a coin or screwdriver to loosen the
screw.

3. Install 2 new “AA” (UM-3/LR6) batteries
following the diagram inside the battery box.
(The use of new alkaline batteries is
recommended for maximum performance.)

4. Replace the battery cover and tighten the screw to secure the battery
cover.

BA TTERY NOTICE

• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.

• Do not mix old and new batteries.

• Do not use batteries of different types.

• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.

• Do not dispose of batteries in fire.

• Do not attempt to recharge ordinary batteries.

3

• The supply terminals are not to be short-circuited.

WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
NOTE: If for some reason the program/activity stops working, please

follow these steps:

1. Please turn the unit OFF.

2. Interrupt the power supply by removing the batteries.

3. Let the unit stand for a few minutes, then replace the batteries.

4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services

Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada and a service representative will be happy to help you.

TO BEGIN PLAY

1. T o turn the unit ON, slide the ON/OFF/
MODE SELECTOR SWITCH to the

TALKING MODE ( ) or the
MELODY MODE ( ) position.

2. To adjust the volume, locate the
VOLUME CONTROL SWITCH on the
bottom of the unit. Slide it to the ( )

position for LOW VOLUME or the ( )
position for HIGH VOLUME.

4

3. To use the phone as a pull toy,
remove the pull cord from the battery
compartment and thread it through
the eyelet on the bottom of the phone.
We suggest you store the pull string
in the compartment until your child
is walking.

4. If there is no input to the phone after
30 seconds you will hear a ringing
sound effect followed by “It’s for you”.
If there is no input after another 30
seconds you will hear “See you soon”
and a hang up sound effect, then the
unit will power-down. The unit can
be turned on again by pressing any
button or by rolling the phone.

5. To turn the unit OFF, slide the ON/
OFF/MODE SELECTOR SWITCH to
the OFF ( ) position.

“See you soon!”
+ hang up sound
effect

5

ACTIVITIES

T ALKING MODE

1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the TALKING MODE

( ) position. Y ou will hear a dialing
and a ringing sound effect followed
by “Hello!”. The light will flash with
all the sounds.

2. Press the NUMBER BUTTONS to
hear the numbers identified and the
corresponding number of music
notes. After any three number
buttons have been pressed you will
hear one of two sound effect
sequences. The light will flash with
all the sounds.

3. Press the “ ” BUTTON to hear a
dialing and a busy signal sound
effect followed by one of five random
melodies. The light will flash with all
the sounds.

Dialing & ringing
sound effect +
“Hello!”

“Two”+

Dialing & busy
signal sound effect

6

4. Press the “#” BUTTON to hear a
ringing sound effect and “Hello!”
followed by one of five random
melodies. The light will flash with all
the sounds.

5. Press the PHONE BUTTON and see
the puppy pop up. You will hear a
ringing sound effect or “It’s for you!”
and a laughing sound effect. The
light will flash with all the sounds.

6. Press the puppy back into the phone
to hear “See you soon!” and a hang
up sound effect. The light will flash
with all the sounds.

7. Pull or push the phone when the
puppy is popped up to hear a sung
song or a random phrase and a
random sound effect. If the puppy is
hiding in the phone, you will hear a
random sound effect or a sung song.
The light will flash with all the
sounds.

7

Ringing sound
effect +“Hello!”

“It’s for you!”
+laughing
sound effect

“See you soon!”
+ hang up sound
effect

MELODY MODE

1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the MELODY MODE

( ) position. You will hear “It’s for
you!” followed by a short tune. The
light will flash with all the sounds.

2. Press the NUMBER BUTTONS to
hear a random sound effect followed
by a pre-programmed melody. The
light will flash with all the sounds.

3. Press the “ ” BUTTON to hear a
dialing and a busy signal sound effect
followed by one of five random melodies.
The light will flash with all the sounds.

“It’s for you!”+

Ringing sound
effect

Dialing & busy
signal sound
effect

8

4. Press the “#” BUTTON to hear a
ringing sound effect and “Hello!”
followed by one of five random
melodies. The light will flash with all
the sounds.

Ringing sound
effect + “Hello!”

5. Press the PHONE BUTTON and see
the puppy pop up. You will hear a
ringing sound effect or “It’s for you!”
followed by a sung song. The light will
flash with all the sounds.

6. Press the puppy back into the phone
to hear "See you soon!" and a
random melody. The light will flash
with all the sounds.

7. Pull or push the phone when the
puppy is popped up to hear a sung
song or a random melody. If the
puppy is hiding in the phone you will
hear a random melody. The light will
flash with all the sounds.

9

“It’s for you!”

“See you soon!”

SUNG SONG L YRICS:

The buttons on the phone go beep, beep, beep
Beep, beep, beep; Beep, beep, beep
The buttons on the phone go beep, beep, beep
When you call your friends

CHEERFUL MELODIES:

1. B-I-N-G-O

2. Baa Baa Black Sheep

3. Three Blind Mice

4. Three Little Kittens

5. Turkey in the Straw

6. Farmer in the Dell

7. Old Grey Mare

8. Glow Worm

9. On Top of Old Smokey

10. Teddy Bears’ Picnic

CARE AND MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.

2. Keep the unit out of direct sunlight and away from any direct heat
source.

3. Remove the batteries when the unit is not in use for an extended
period of time.

4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.

10

IMPORTANT NOTE

Creating and developing toddler products is accompanied by a
responsibility that we at VTECH® take very seriously. W e make every
effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products and
encourage you to call our Consumer Services Department at 1-800­521-2010 in the U.S. or 1-800-267-7377 in Canada with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.

Note:

This equipment generates and uses radio frequency energy and if not
installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply within
the limits for a Class B computing device in accordance with the
specifications in Sub-part J of Part 15 FCC Rules, which are designed to
provide reasonable protection against such interference in a residential
installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference with
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• reorient the receiving antenna

• relocate this product with respect to the receiver

• move this product away from the receiver

11