VTech DS6421-3, DS6421-4, DS6421-2 User Manual

Bluetooth quick start guide

DS6421-2/DS6421-3/DS6421-4

Bluetooth setup

To use a Bluetooth enabled cell phone or headset with your

DS6421, you must rst pair and connect your Bluetooth

device(s) with the telephone base. All DS6421 handsets can be used to make or answer calls on the cell phone line.

Bluetooth wireless technology operates within a short range (a maximum of approximately 30 feet). When you pair a Bluetooth cell phone or Bluetooth headset to the telephone base, make sure your Bluetooth device is close to the

telephone base to maintain sufcient signal strength.

Keep your Bluetooth device close to the telephone base to maintain a reliable connection.

Refer to your user’s manual for complete feature instructions.

•

The pairing process may take up to one minute. If the pairing

• process fails, try again.

If you put the handset back in the telephone base or charger

• while pairing, the process stops and the handset returns to idle mode.

Pair and connect your rst Bluetooth cell phone

Before you begin, make sure you have cellular

coverage and your Bluetooth enabled cell phone is not connected to any other Bluetooth device.

To pair and connect your rst Bluetooth cell phone:

Press MENU.

Answering sys

Press or to highlight Bluetooth,

2. then press SELECT.

Press SELECT to choose Add device.

Press SELECT to choose Add cellular.

When the screen displays 1. If cell

is connected to BT device, please disconnect it., press NEXT.

When the screen displays 2. Place

cell phone next to base., press

NEXT to set the telephone base to

discoverable mode.

The handset displays Set cell to search

base: VTech DS6421 discoverable PIN:0000. Promptly turn on the

Bluetooth feature of your cell phone and search for or add new devices.

Directory Caller ID log Intercom

Blu etooth BACK

BLUETO OTH

Add device

Device list Download dir Chang e PIN

BACK

ADD DEVICE

Add cellular

Add hea dset

BACK

1. If cell is connected to BT device, please disconnect it.

2. Place cell phone n ext to base.

BACK

Set cell to searc h base: VTech DS6421

discoverable

PIN:0000

SELECT

Once your cell phone nds your VTech phone, press

8. the appropriate key on your cell phone to continue the pairing process.

Enter the PIN of the telephone base (the default PIN is

0000) into your cell phone.

When successfully connected, the handset displays

10.

briey Adding Cell Phone A to device list... and then Cell Phone A is added and connected to base., and

then returns to idle mode.

Adding

Cell Phone A

to device

list...

Cell Phone A

is added

and connected

to base.

HANDSET

12:3 0pm 12/25

The corresponding device light (D1 or D2) on the telephone base turns on.

If you have trouble pairing your cell phone, it may not be compatible with your DS6421. Check the Bluetooth compatibility list at www.vtechphones.com.

The steps for the pairing process may vary for different cell

• phones. If this happens, follow the prompts on your cell phone and your DS6421 to complete the pairing process.

Refer to the user’s manual of your cell phone on how to search

• for or add a new Bluetooth device.

Pair and connect your rst Bluetooth

headset

Before you begin, make sure your Bluetooth

enabled headset is not connected to any other Bluetooth device.

Bluetooth headsets can only be used for calls on the home line.

To pair and connect your rst Bluetooth headset:

Press MENU.

Press or to highlight Bluetooth

2. then press

Press SELECT to select Add device.

SELECT

Answering sys Directory Caller ID log Intercom

Blu etooth BACK

Add device

Device list Download dir Chang e PIN

BACK

SELECT

BLUETO OTH

SELECT

Press or to highlight Add headset

4. then press SELECT.

When the screen displays If headset

is connected to cell, please disconnect it., press NEXT.

When the screen displays Pls set

6. headset to discoverable mode, press NEXT.

Set your headset to discoverable mode

ADD DEVICE Add cellular

Add hea dset

BACK

If headset is connected to cell, please disconnect it.

Pls se t headset to discoverable mode

BAC K NEXT

(refer to the user’s manual of your headset).

Press NEXT to search for your headset.

8. The handset displays Searching for Bluetooth headsets...

Once the telephone base nds your

9. headset, press or to select a headset (if necessary) and then press SELECT.

Enter the PIN of your headset. The PIN for most Bluetooth

10.

Searc hing for

Blu etooth

heads ets...

FOUND D EVICES

Heads et A

Heads et B

BACK

devices is 0000 (refer to the user’s manual of your headset).

Press NEXT. When successfully connected, the handset

11.

displays briey Headset A is added and connected to base. and then returns to idle mode.

Heads et A

is added

and connected

to base.

HANDSET

12:3 0pm 12/25

The corresponding device light (D1 or D2) on the telephone base turns on.

SELECT

If you have trouble pairing your headset, it may not be compatible with your DS6421. Check the Bluetooth compatibility list at www.vtechphones.com.

The pairing process may take up to one minute. If the

• pairing process fails, try again.

If you put the handset back in the telephone base or

• charger while pairing, the process discontinues and the handset returns to idle mode.

Download directory

You can download up to four cell phone directories to your DS6421 via Bluetooth wireless technology.

Place your cell phone next to the telephone base when you

• download a cell phone director y to your DS6421.

Make sure the cell phone is paired to your DS6421, on the

• device list and connected to the base before you download a cell phone directory.

For certain cell phones, you may need to press a key on your

•

cell phone to conrm the directory download.

To download a cell phone directory:

Press MENU.

Press or to highlight Bluetooth

2. and then press SELECT.

Press or to highlight

3. Download dir, then press SELECT.

Press or to select a desired device

4. (if necessary), then press SELECT.

Press or to highlight

Phone memory, SIM card only or Phone and SIM.

Answering sys Directory Caller ID log Intercom

Blu etooth BACK

Add device Device list

Download dir

Chang e PIN

BACK

DOWNLOAD DIR

D1: Cell Phone A

D2:C ell Phone B

BACK

DOWNLOAD FROM

Phone m emory

SIM card only Phone a nd SIM

BACK

SELECT

BLUETO OTH

SELECT

Press SELECT. During the download

6. process, the handset displays the progress. All other idle system handsets display Downloading dir.

When the downloading process

7. completes, the handset displays Download ended xxxx entries saved.

Press OK to return to the download

Cell Phone A

Downloading entry #X XXX

STOP

Download ended

XXXX

entries saved

directory menu.

The Bluetooth® word mark and logos are owned by Bluetooth

SIG, Inc. and any use of such marks by VTech Holdings Limited is under license. VTech Holdings Limited is a member

of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

96-007997-020-100