V-Tech C5-IPC User Manual

Product Information

CAT5 Accessories

C5-IPC

DESCRIPTION FEATURES

CAT5 system IP network converter

DIMENSION

60 mm

150mm

140 mm

► Only one C5-IPC is required in one block.

► Built-in watchdog circuit in case of crash.

► LED Indicators to show system status

► RJ45 Standard connection port

► IP address setting & store

► Support T C P / I P network a n d fiber

tra n smi s sion or b r oadh a nd n etwo rk
access.

► Adopt MPEG4 video protocol and G.729

audio protocol.

► Include 100Mbit Ethernet LAN and RS485

connection port.

1. Parts and Funcons

S1

*PA: Reset button. Press and hold for 3s to

initialize C5-IPC; If initialization complete
successfully, power off, and re-power C5-

JTAG

POWER PA

LINK

IN-USE

IPC, LINK&IN-USE indicators will flicker
once simultaneously, then INK indicator will
icker till IN-USE indicator is always ON

*S1: DIP Switch. Refer to DIP Switch Setting

*JTAG: PC Port. Update C5-IPC program by

PC that is connected by RS232 convertor

JP1/2/3 SW1

*RS485: PC Port. Set parameters update

the rmware of C5-IPC by PC RS485-USB
convertor

RS485POWER

JWB(IN)

JWB(OUT)

*JWP: Power Input P+: Positive,18V; P-:

Negative

*JWB (IN): Bus Signal Input. RJ45 port includes audio, data & video. It can be connected to door

station only

*JWB (OUT): Bus Signal Output. RJ45 port includes audio, data & video. It can be connected to

distributor.

*CN-MDS: Bus Signal Input. RJ45 port,connected to MDS only

*CN-NET: RJ45 Network Port, connected to LAN

*JP1/JP2/JP3: Jumper. Removed if C5-MDS connected

*SWI: Distributor Setting. Match different distributor

VR600

CN(MDS) ETHERNET

2. Unit Mounng

124mm

109mm

Direct Wall Mounting DIN Rail Mounting