How it Works
VTech
Loading...
B
C
Loading...
Loading...
Bugsby Reading System
System User Manual
10 pgs830.41 Kb0

VTech 80-103000 - Bugsby Reading, Bugsby Reading System System User Manual

Download
© 2009 VTECH
Printed in China
91-002371-000-000
INTRODUCTION
2
INTRODUCTION
Welcome to the wonderful world of reading with the Bugsby Reading System™! Bugsby is an adorable bookworm who will introduce your
Touch Reading
Sensor
Speaker
On/Off Button
Read the Whole
Story Button
Headphone Jack
Reset Button
Bugsby Book
Bugsby Cartridge
Volume Buttons
INCLUDED IN THIS PACKAGE
• 1 Bugsby Reading System™
• 1 interactive book - Bugsby’s Amazing Search
• 1 game cartridge – Bugsby’s Amazing Search WARNING: All packing materials, such as tape, plastic sheets,
packaging locks, wire ties and tags are not part of this toy, and should be discarded for your child’s safety.
Note: Please keep the user’s manual as it contains important
information.
GETTING STARTED
Step 1: Battery Installation
The Bugsby Reading System™ operates on 2“AAA” (AM-4/LR03) batteries.
1. Make sure the unit is turned off.
2. Locate the battery cover on the back of the unit and open it.
3. Insert 2 “AAA” batteries (AM-4/LR03) as illustrated. DO NOT USE RECHARGEABALE BATTERIES IN THIS UNIT.
4. Close the battery cover.
GETTING STARTED
3
Step 2: Take the cartridge out of the
storage slot on the book.
Step 3: Insert the cartridge into the back
of the Bugsby pen.
Step 4: Switch on the Bugsby pen.
FEATURES
ON/OFF BUTTON
To turn your Bugsby Reading System™ on, press the On/Off button. Press this button again to turn the system off.
AUTOMATIC SHUT-OFF
If the Bugsby Reading System™ is not active for several minutes, it will automatically shut off to save power. Press the On/Off button ( ) to turn it back on. We recommend turning the unit off when you finish playing with it.
FEATURES
4
READ THE WHOLE STORY BUTTON
Press this button to hear the whole story read aloud.
VOLUME BUTTONS
Use the volume buttons to adjust Bugsby’s volume level. Press the ( ) button to raise the volume, and the ( ) button to lower the volume.
HEADPHONE JACK
You can plug a set of headphones (not included) into Bugsby’s headphone jack to hear the sound individually.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon­zinc) or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be used for an extended period of time
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are to be used.
NOTE: If the sound becomes weak or the unit suddenly stops working,
turn the unit off for 15 seconds, then turn it back on. If the problem persists, it may be caused by weak batteries. Please install a new set of batteries and try the unit again.
BATTERY NOTICE
5
CARE AND MAINTENANCE
1. Keep the Bugsby Reading System™ clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from direct sources of heat.
3. Remove the batteries when the unit will not be used for a long period of time.
4. Do not drop the unit on hard surfaces or try to dismantle it.
5. Do not immerse the unit in water or get the unit wet.
6. For best performance, keep the reading sensor at the bottom of the pen free of dirt.
TROUBLESHOOTING
1. If your Bugsby pen stops working or does not turn on:
• Check your batteries. Make sure the batteries are fresh and
properly installed.
• Insert the tip of a paper clip (or a similar object without a
sharp tip) into the small hole at the left side of the unit labeled “Reset.”
NOTE: After resetting, default settings will be restored.
• If you are still having problems, visit our website at www.
vtechkids.com for troubleshooting tips.
2. If after pressing the On/Off button, nothing happens:
• Check to see that inserted batteries are aligned correctly.
Reminder:
respond, insert the tip of a paper clip into the Reset button.
CARE AND MAINTENANCE
6
TECHNICAL SUPPORT
If you have a problem that cannot be solved by using this manual, we encourage you to visit us online or contact our Consumer Services Department with any problems and/or suggestions that you might have.
A support representative will be happy to assist you. Before requesting support, please be ready to provide or include the information below:
• The name of your product or model number (the model number is typically located on the back or bottom of your product).
• The actual problem you are experiencing.
• The actions you took right before the problem occurred.
Internet: www.vtechkids.com Phone: 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada
COPYRIGHT NOTICES:
Copyright 2009 VTech Electronics North America, L.L.C. All Rights Reserved. VTech® and the VTech logo are registered trademarks of VTech. Bugsby Reading System is trademark of VTech Electronics North America, L.L.C. All other trademarks are property of their respective owners.
IMPORTANT NOTE:
Creating and developing Bugsby Reading System™ products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352­8697 in Canada, with any problems and/or suggestions that you might have. A service representative will be happy to help you.
TECHNICAL SUPPORT
7
OTHER INFO
DISCLAIMER AND LIMITATION OF LIABILITY
Address: 1155 West Dundee Rd., Suite 130, Arlington Heights, IL 60004 USA
Phone: 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada
OTHER INFO
8
Note:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-
003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
OTHER INFO
9
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use