Vtech 9161 User Manual

SELECT

PHONE

HOLD

FLASH

1 2 3

ABC DEF

4 5 6

GHI JKL MNO

7 8 9

PQRS TUV WXYZ

TONE OPER

MEM PROG

NEW CHAN PAUSE

CID

OFF

REDIAL

PROG/CHAN

OFF

HOLD

PHONE

REDIAL

MEM

MEMORY DIALING

To store a number in memory:

1. Press MEM .

2. Enter the name. Then press

3. Enter the phone number . Then press SELECT. The number is now stored. To dial a number from memory:

1. Press until you see the desired number.

2. Press PHONE. The displayed number will be dialed. Press OFF to end your call.

CHANGING CHANNELS

If you experience noise or interference during a conversation, press PROG/CHAN to switch to a clear channel.

FLASH

You can use your VT9161 cordless telephone with services such as Call Waiting. Press PHONE/FLASH to swith to the incoming call.

PAGE

From the base unit, press PAGE to signal the person at the handset.

VTECH COMMUNICATIONS LTD.

SELECT

PHONE

HOLD

FLASH

1 2 3

ABC DEF

4 5 6

GHI JKL MNO

7 8 9

PQRS TUV WXYZ

TONE OPER

MEM PROG

NEW CHAN PAUSE

Quick Reference Guide

FOR VT 9161

CID

OFF

MHz

900

VT 9161

ANSWER

ON/OFF

REC/MEMO

REDIAL

IN USE/CHARGE

MESSAGE

NEW CALL

MAILBOX

PLAY/STOP

SELECT

TIME/SET

VOL

DELETE

SKIP/QUICK

REPEAT/SLOW

PAGE

MIC

VTECH COMMUNICATIONS LTD.

900

VT 9161

IN USE/CHARGE

MAILBOX

DELETE

REPEAT/SLOW SKIP/QUICK

MIC

1. POWER UP: ANSWER ON/OFF LED illuminates at power up

2. ITAD Programing Overview

1.Set Outgoing Message.

2.Set Security Code

MHz

ANSWER

REC/MEMO

ON/OFF

MESSAGE

NEW CALL

MAILBOX

PLAY/STOP

TIME/SET

SELECT MENU

VOL

PAGE

ANSWER ON/OFF

REC/MEMO

DELETE

TIME/SET

SELECT

SKIP/QUICK

REPEAT/

SLOW

PAGE

3.Set Day and Time

4.Set Audible Message Alert

5.Set Announce Only

6.Set Base Ringer

7. Set Number of Rings

TELEPHONE WALL JACK

AC ELECTRICAL OUTLET

RECORDING OUTGOING ANNOUNCEMENTS

1. Press MENU ( “--” LED flashes during set-up). Prompt : “Set Outgoing Message ”.

2. Press REC/MEMO to record announcement. Prompt: "Now Recording ". Record your announcement.

3. Press MAILBOX X(1,2 or 3) to stop recording. Your announcement will automatically be played back, followed by a beep.

SET SECURITY CODE

1. Press MENU twice. Prompt: “Set Security Code” (default setting is 19).

2. Press SELECT. Prompt will give current security code. Continue to press SELECT until desired security code is reached (00-99). Short press increase code by 1. Holding SELECT continuously will increment code by 10.

3. Press TIME/SET. Prompt: “Security Code is XX”.

SET DAY & TIME

1. Press MENU 3 times. Prompt: “Set Day & Time”.

2. Press SELECT. Voice cycles through days of the week as you keep pressing SELECT. Stop at desired day.

3. Press TIME/SET. Voice cycles through the hours as you keep pressingSELECT. Stop at desired hour.

4. Press TIME/SET. Voice cycles through the minutes as you keep pressing SELECT. Stop at desired minute.NOTE: holding SELECT key continuously increases minutes by 10.

5. Press TIME/SET. Voice will repeat the selected DAY & TIME.

SET AUDIBLE MESSAGE ALERT

1. Press MENU 4 times Prompt: “Set Audible Message Alert ”.

2. Press SELECT. Prompt: “ON ” (or “OFF” ).

3. Pressing SELECT toggles between ON and OFF.

4. Press TIME/SET. Prompt: “Audible message Alert ON” (or “OFF”).

SET ANNOUNCE ONLY

1. Press MENU 5 times. Prompt: “Set Announce Only”.

2. Press SELECT until desired setting “on” or “off” is declared.

3. Press TIME/SET. Prompt: “Announce Only” is ON (or OFF).

SET BASE RINGER

1. Press MENU 6 times. Prompt: “Set Base Ringer”.

2. Press SELECT. Prompt: “ON” (or “OFF”).

3. Press SELECT to toggle between ON and OFF.

4. Press TIME/SET. Prompt: “Base Ringer is on (or off)”.

SET # OF RINGS

1. Press MENU 7 times. Prompt: “Set Number of Rings ”.

2. Press SELECT. Voice cycles through “2, 4, 6, T oll Saver ”. Press SELECT until you reach desired setting.

3. Press TIME/SET. Voice will repeat selected Ring setting.

Press any MAIL BOX key to exit set-up mode at any time.