Vortexgear POK3R User Manual

!

POK3R User manual

The Vortexgear POK3R is the perfect solution for limited space in situations. It's
integrating 3 kind of layout. Also features 3 layers customization options individually
programmable key codes and LEDs, all easily set through what you want.

Main Features:

1.!ANSI or ISO layout with 60% size

2.!Cherry MX inside

3.!Arbitrary programming key code and LED colors

4.!ABS double shot Keycaps

5.!3 layers customization

6.!Built-up 3 kind of layout (Qwerty, Dvorak, Colemak)

7.!Metal bezel

Package Content:

1.!Keyboard x 1

2.!USB Cable x 1

Enjoy now for this fantastic tool and your typing feeling.

!

Keycode Programming Instructions*1:

Step 1. Choose a layer (Fn+<,> or ? key) you want to edit the keycodes.

Step 2. Press Fn + Right CTRL to enter the programming mode (Spacebar right LED steadily lit)

Step 3. Select a desire key you want to program (Spacebar right LED flashing)

Step 4. Key in the programming contents and then press Pn(Spacebar right LED steadily lit again)

Step 5. Repeat step 2 and step 3 to program other keys.

Step 6. Press Fn + Right CTRL to exit programming mode (Spacebar right LED off)

More:

· Support Fn layer programming, you can select the Fn combination key (e.g., Fn + A) to program it

· Support time delay, press 15ms key (Fn + T) each time to delay 15ms, press 0.1s key (Fn + G) each time

to delay 0.1s, press 0.5s key (Fn + B) each time to delay 0.5s. Consecutive delay will add up but will only

be counted as 1 key stroke.

· Every key can program up to 32 key strokes.

· If there is no key pressed for 15 sec in programming mode, it will back to normal mode.

Note:

*1

Default layer, R_ctrl, M,<,> and ? keys are fixed can’t be programmed.

Restore to factory default:

Current layer:

Press and hold Fn + R

All layers:

Press and hold both Alt keys, it will clean all the layers’ program key codes.

Remark:

1. When you reset the current layer or all layers, the spacebar left LED will flash at the after 5 seconds then it
will return to default.

2. If you had changed the Fn position and forgot where it was. You still can press the original position of Fn +
R to restore it.