Vornado VH102 User Manual
READ AND SAVE THESE INSTRUCTIONS
Whole Room Heater Owner’s Guide
LEER Y GUARDAR ESTAS INSTRUCCIONES
Guía del propietario el calentador para ambientes
www.vornado.com
models VH102 & VH2
Assembled, designed and supported in Andover, Kansas.
Contents
Important Instructions ........................................................................ 4
Vornado Vortex Action ....................................................................... 5
How To Use
VH102 Controls ............................................................................... 6
VH2 Controls ................................................................................... 6
Resetting Your Vornado Heater ...................................................... 7
Montaje, diseño y soporte en Andover, Kansas.
Questions or comments?
¿
Prequntas o comentarios?
www.vornado.com
consumerservice@vornado.com
800.234.0604
Advanced Safety Features .................................................................. 7
Cleaning and Storage
How To Clean .................................................................................. 8
Storage ............................................................................................ 8
Troubleshooting ................................................................................. 9
Operating Tips .................................................................................... 9
Warranty ............................................................................................ 10
Español p. 11
English2 English
3
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.
Please visually inspect all internal and external components before connecting
to electric current. If any damage is found, DO NOT USE THIS UNIT and
contact Vornado Air LLC at 1-800-234-0604.
This appliance has a polarized plug. (One blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
When using electrical appliances, basic precautions should always be followed
to reduce the risk of fire, electric shock, and injury to persons, including the
following:
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use handles when moving this heater. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes, and curtains at least 3
feet (0.9 m) from the front of the heater and keep them away from the sides
and rear.
Extreme caution is necessary when any heater is used by or near children or
invalids and whenever the heater is left operating and unattended.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped or damaged in any manner. Discard heater,
or return to authorized service facility for examination and/or repair.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations. Never locate heater where it may fall into a bathtub or
other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.
To disconnect heater, turn controls to off, then remove plug from outlet.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
Do not use on soft surfaces, like a bed, where openings may become
blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in areas
where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury
to persons.
Always plug heaters directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power tap (outlet/power strip). Operate this
heater only in its upright position.
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
This heater is equipped with a thermal safety shut-off system, designed to
turn off the heater when an internal overheating condition is detected (see
How To Use “RESETTING YOUR VORNADO HEATER,” to determine how to
check and reset the heater).
Do not operate this product with any electronic speed-control device on
the same circuit.
Do not use heater to dry human or animal hair/fur or articles of clothing.
SAVE THESE INSTRUCTIONS
Vornado® Vortex Action
Ordinary Heater
Without Adequate
Heat Circulation
82º
82º
82º
62º
Ordinary heaters provide only localized heat.
Heat immediately rises to the ceiling, resulting in
cold and hot spots in the room. Vornado’s unique
Vortex Action delivers continuous, uniform heat
surrounding everyone in the room in a warm,
comfortable temperature.
Vornado Whole
Room Heater
With Signature
Vortex Heat
Circulation
72º
72º
72º
Trust.
It is said that trust isn’t given, but earned. For decades Vornado has been
earning the trust of our customers by offering them only the best. Vornado
provides the highest level of performance, coupled with the highest level of
support available. Complete satisfaction with no exceptions – this is Vornado’s
promise to you. If you are not satisfied for any reason, please contact us.
Knowledgeable representatives are available at 1-800-234-0604 from 8:00 AM
to 5:00 PM CST. A wealth of additional support is also available online at www.
vornado.com. On behalf of myself and the entire staff at our Andover, Kansas
headquarters – thank you for selecting Vornado.
Sincerely,
Bill Phillips
CEO, Vornado Air
Find our complete product line at www.vornado.com
English4 English
5
How To Use
VH102 Controls
4
1
4
Heat
(I) Low Heat 750 watts
(II) Medium Heat 1125 watts
(III) High Heat 1500 watts
VH2 Controls
4
1
3
2
3
2
1
Power On/Off
Illuminated when the unit is On.
2
Thermostat
Allows you to select your desired
comfort level.
For fan only use - select the Fan
setting and press Cont. on the
Fan switch.
Fan
3
In the Auto position, the fan will
cycle on and off with the heating
element. In the Cont. position,
the fan will run continuously.
1
Power On/Off
Illuminated when the unit is On.
Thermostat
2
Allows you to select your desired
comfort level.
3
Fan
In the Auto position, the fan will
cycle on and off with the heating
element. In the Cont. position,
the fan will run continuously.
4
Heat
Low Heat 750 watts
High Heat 1500 watts
Getting Started
Using your Vornado Heater is easy. Just follow these simple
steps.
1. Position your heater so the vortex beam of warm air is
directed across the room, unobstructed. Position it in a
location that is representative of the room temperature.
Avoid areas of temperature extremes such as cold drafts and
heat registers (refer to IMPORTANT INSTRUCTIONS for safe
placement).
2. Plug power cord into standard wall outlet.
3. Set Power switch to On.
4. Select High or Low heat.
5. Set Thermostat to the highest setting. When the room
reaches the desired comfort level, turn the Thermostat knob
slowly counterclockwise until the heat cycles off (easier to
detect when Fan is set to Auto).
How To Use
Resetting Your Vornado Heater
Your Vornado Heater has a multi-level safety shut-off system
designed to prevent overheating. Overheating may occur
when the inlets or outlet are blocked, a foreign object
prevents the blade from turning, or the appliance tips over. If
this happens, the safety shut-off system will cut power to the
heat element and you will need to manually reset the heater.
1. Set the Power switch to Off and unplug the unit.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing the unit to cool down.
4. Plug in the unit and place in desired position.
5. Set the Power switch to On. Your Vornado Heater should
now function normally.
Note: If the safety shut-off system repeatedly shuts off
your heater or if it will not reset after following the above
procedure, DO NOT ATTEMPT TO DISASSEMBLE THE UNIT.
Call Vornado Consumer Services Department toll-free at
1-800-234-0604.
Advanced Safety Features
Tight Grill Spirals
Resists curious fingers.
Cool Touch Case
Safe to touch, even on high heat setting.
Automatic Safety Shut Off System
If airflow becomes blocked and overheating occurs,
power to the heating element is shut off.
Tip-Over Protection
Heater will automatically shut off if tipped towards
the front or back.
Ideal 120°F Exit Air Temperature
Warm enough to heat an entire room.
English6 English
7
Loading...