Vornado ATH1 Owner's Manual
model ATH1
READ AND SAVE THESE INSTRUCTIONS
Tower Heater Owner’s Guide
LEER Y GUARDAR ESTAS INSTRUCCIONES
Guía Del Propietario Del Calefactor De La Torre
www.vornado.com
2 English
Designed, engineered and supported in Andover, Kansas.
Questions or comments?
www.vornado.com
consumerservice@vornado.com
800.234.0604
Pensado, diseñado y respaldado en Andover, Kansas.
¿
Prequntas o comentarios?
3
English
Español p. 11
Important Instructions ........................................................................ 4
Vornado V-Flow™ Heat Circulation .................................................... 5
How To Use Tower Heater Controls ................................................... 6
How To Use
Positioning Your Tower Heater ....................................................... 7
Using Your Vornado Heater ............................................................7
Resetting Your Vornado Heater ...................................................... 7
Advanced Safety Features .................................................................. 8
Cleaning and Storage
How To Clean .................................................................................. 8
Storage ............................................................................................ 8
Troubleshooting ................................................................................. 9
Operating Tips .................................................................................... 9
Warranty ............................................................................................ 10
Contents
4 English
Please visually inspect all internal and external components before connecting
to electric current. If any damage is found, DO NOT USE THIS UNIT and
contact Vornado Air LLC at 1-800-234-0604.
This appliance has a polarized plug. (One blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
When using electrical appliances, basic precautions should always be followed
to reduce the risk of fire, electric shock, and injury to persons, including the
following:
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use handles when moving this heater. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes, and curtains at least 3
feet (0.9 m) from the front of the heater and keep them away from the sides
and rear.
Extreme caution is necessary when any heater is used by or near children or
invalids and whenever the heater is left operating and unattended.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped or damaged in any manner. Discard heater,
or return to authorized service facility for examination and/or repair.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations. Never locate heater where it may fall into a bathtub or
other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.
To disconnect heater, turn controls to off, then remove plug from outlet.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
Do not use on soft surfaces, like a bed, where openings may become
blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in areas
where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury
to persons.
Always plug heaters directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power tap (outlet/power strip). Operate this
heater only in its upright position.
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
This heater is equipped with a thermal safety shut-off system, designed to
turn off the heater when an internal overheating condition is detected (see
How To Use “RESETTING YOUR VORNADO HEATER,” to determine how to
check and reset the heater on page 7).
Do not operate this product with any electronic speed-control device on the
same circuit.
Do not use heater to dry human or animal hair/fur or articles of clothing.
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.
SAVE THESE INSTRUCTIONS
5
English
V-Flow™ Heat Circulation
Ordinary heaters provide only localized heat. Heat immediately rises
to the ceiling, resulting in cold and hot spots in the room. Vornado’s
unique V-Flow Action delivers continuous, uniform heat, surrounding
everyone in the room in a warm, comfortable temperature without
the need for oscillation.
Trust.
It is said that trust isn’t given, but earned. For decades Vornado has been
earning the trust of our customers by offering them only the best. Vornado
provides the highest level of performance, coupled with the highest level of
support available. Complete satisfaction with no exceptions – this is Vornado’s
promise to you. If you are not satisfied for any reason, please contact us.
Knowledgeable representatives are available at 1-800-234-0604 from 7:00 AM
to 6:00 PM CST. A wealth of additional support is also available online at
www.vornado.com. On behalf of myself and the entire staff at our Andover,
Kansas headquarters – thank you for selecting Vornado.
Sincerely,
Bill Phillips
CEO, Vornado Air
Find our complete product line at www.vornado.com
Ordinary Tower Heater
Without Adequate Heat Circulation
Vornado ATH1
With Signature V-Flow™ Heat Circulation
W
I
D
E
H
E
A
T
I
N
G
Z
O
N
E
N
O
O
S
C
I
L
L
A
T
I
O
N
N
E
E
D
E
D
C LA H
6 English
1
Power On/Off
Press ( ) to turn unit On or Off. LED light illuminates when the
unit is On. When turning the unit Off, the display will countdown
8 seconds. This time allows the heater to cool before shut down.
Temperature Control
Allows you to select your desired comfort level. Press ( ) to
increase the set temperature. Press ( ) to decrease the set
temperature. The heat output will be adjusted automatically, to
accurately maintain the room temperature.
Fan Control
Press ( ) to select either Continuous (C) or Auto (A). In
Continuous mode (C), the Fan will run Continuously on high
speed when High Heat (H) is selected, or Continuously low
speed when Low Heat (L) is selected.
In Auto mode (A), the Fan speed will fluctuate to efficiently
maintain set temperature.
Heat Setting Control
Press ( ) to select either (L) Low Heat (maximum of 750 watts) or
(H) High Heat (maximum of 1500 watts).
How To Use Tower Heater Controls
2
3
4
1
2
3
4
Loading...