Vornado 783, 733, 723 User Manual
models
723, 733, 783
WHOLE ROOM CIRCULATOR
OWNER’S GUIDE
GUÍA DEL PROPIETARIO DEL
CIRCULADOR DE AIRE PARA TODA
LA HABITACIÓN
GUIDE DE L’UTILISATEUR DU
VENTILATEUR INTÉGRAL DE PIÈCE
vornado.com
we expect
if it’s not
2 English
this product
to be PERFECT
WE will make
it right.
vornado.com
800.234.0604
help@vornado.com
CONTENTS
Important Instructions ........................................................................4
Features ..............................................................................................7
Getting Started ................................................................................... 8
Cleaning .............................................................................................. 9
Troubleshooting ............................................................................... 11
Warranty ............................................................................................ 12
Español p. 13 Français p. 24
English
3
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part of
the product. They contain important information about safety, use and
disposal. Before using the product, please familiarize yourself with all
operating and safety instructions. Please keep all documents for future
reference and pass these documents on, together with the product,
to any future owner. See our website to view, download and print the
most current version of this owner’s guide.
INTENDED USE: This product is intended to circulate the air in indoor
living spaces only in the United States and Canada. This product is not
intended for commercial or industrial use. The manufacturer assumes
no responsibility for damage or injury due to unauthorized use or
product modification. Failure to follow these directions will void the
product warranty.
WARNING: Risk to Children and Impaired Persons
- Supervision is required during the installation, operation, cleaning
and maintenance of this product by children under age 12 and
anyone with reduced physical, sensory or mental capabilities.
Children should be supervised to ensure that they do not play with
the appliance, its parts and packaging material.
INSTALLATION WARNING—To reduce risk of fire, electrical shock
and injury to persons, observe the following:
- Place this product away from curtains, draperies, tablecloths and
other fabrics, since they may be drawn into the fan, damage the
motor and/or cause a fire.
- No part of this product (the appliance, power cord, plug, packaging,
etc.) should be placed near furnaces, fireplaces, stoves or other high
temperature heat sources. Do not use this product in a window, on
an uneven or unstable surface, or near water.
- The appliance, power supply, power cord and plug cannot come
into contact with water. Do not use this product on wet surfaces.
Do not use this product in a bathtub or shower or position product
where it may fall into a bathtub, laundry, swimming pool or other
water container. Do not use this product outdoors or expose it
weather or elements.
- Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route under furniture or
appliances. Arrange cord away from traffic area and where it will not
be tripped over. The cord should not hang over edges of counters
or be placed where it can be crimped or closed in doors. Place
appliance near an easily accessible outlet so the product can be
unplugged quickly during an emergency.
SAFE USE WARNING—To reduce risk of fire, electrical shock and
injury to persons, observe the following:
- WARNING: To reduce likelihood of circuit overload, fire and electric
shock, do not operate with a solid state speed device, such as a
dimmer control switch.
- Do not operate unit if the unit has been dropped or damaged. Do
not use this product if it has a damaged power cord or plug. To
avoid risk of electrical shock, do not attempt to repair or replace
parts. Only original replacement parts may be used. If the power
cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a
hazard. Contact Vornado Consumer Service at 1-800-234-0604
(phone) or consumerservice@vornado.com (email) for further
instructions about replacement and repair.
- Risk of fire. Your appliance may be equipped with a detachable
4 English
power supply or a cord/plug with a safety device such as a fuse. Use
only the power cord and plug provided.
- Before plugging power cord into electrical outlet, be sure that
all electrical information on the rating label, including voltage, is
compatible with your outlet’s power supply.
- Never use the cord as a handle or otherwise yank, strain or stretch
the power cord.
- While the product is plugged in, do not insert or allow foreign
objects to enter any input or output opening as this may cause risk
of electric shock or fire, or damage the product.
- A loose fit between wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the
product in this outlet. Contact a qualified electrician to replace
loose or worn outlets.
- This appliance has a polarized plug (one blade is wider than the
other.) To reduce the risk of electrical shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
- Before moving, repositioning, servicing, cleaning and when not in
use, use the product controls to turn off the power and then unplug.
To disconnect from outlet, grasp and pull only the plug. Also, power
off and unplug if the product will be left unattended for an extended
period of time or during electrical storms.
SERVICING WARNING—To reduce risk of fire, electrical shock
and injury to persons, observe the following:
- Clean your product regularly, only as is instructed in this manual.
Prior to cleaning, turn off the power on your product and unplug. Do
not use gasoline, thinners, solvents, ammonias or other chemicals
for cleaning. Refer to the CLEANING instructions provided.
- Do not open appliance housing while product is plugged in. To
avoid risk of shock, all service and/or repairs must be done by a
Vornado Authorized Service Center.
- This product may have an overload protection (fuse) located in
the plug. A blown fuse indicates an overload or short-circuit. If the
fuse blows, follow these instructions to replace and reinstall the
safety device:
User Servicing Instructions
1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect from the outlet.
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as
approved by Vornado Consumer Service. For an authorized
replacement fuse, please contact Vornado Consumer Service.
4. Once the replacement is received, use a small flat-head
screwdriver to slide open the fuse cover (located on the plug)
(See Fig. A).
5. Remove fuse by using the screwdriver to gently lift each end of
the fuse (See Fig. B).
6. Install the replacement fuse by using the screwdriver to gently
push each metal end of the fuse into the receptacle one at a
time. Do not push on the center of the fuse—it is fragile and
may break.
7. Slide the fuse cover closed using the screwdriver. When
closed, the cover should fit completely in the plug. No part of
the cover should stick out (See Fig. C).
8. Plug your appliance into the outlet and turn the power on.
9. If the replacement fuse blows, a short-circuit may be present
and the product should be discarded or returned to an
authorized service facility for examination and/or repair.
Fig. A Fig. B Fig. C
English
5
FCC Consumer Advisement
This equipment may generate, use and/or radiate radio frequency
energy that may cause harmful interference to radio communications.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to contact Vornado Consumer Service.
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the product.
DISPOSAL WARNING
To reduce waste and environmental harm, observe the following:
PACKAGE RECYCLING: The packaging protects the
appliance from transport damage. The packaging materials
are selected from the point of view of their environmental
friendliness and disposal technology and are therefor
recyclable. Dispose of all packaging materials in an
environmentally responsible manner.
WEEE Recycling
- Waste Electrical and Electronic Equipment Disposal: This
marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product
was purchased. They can take this product for environmental
safe recycling.
6 English
FEATURES
Save energy by maximizing the performance of heating and cooling systems. When you use a Vornado Air Circulator, you will not have to
set your summertime thermostat as low or your wintertime thermostat as high.
CONTROLS
723, 783
CONTROL
KNOB
733
CONTROL
KNOB
MED
LOW
OFF
HIGH
HIGH
MED
LOW
DIRECTABLE
AIRFLOW
Direct the
airflow where
you want it.
FINGER FRIENDLY
DESIGN
Resists curious fingers.
REMOVABLE GRILL
For easy cleaning.
AIR INLETS
Signature inlets and
powerful motor to
move more air.
MULTIPLE SPEEDS
Speed setting for
every comfort level.
SILICON FEET
Non-marking feet
added for stability.
English
7
GETTING STARTED
Screw
INSTALLING PROTECTIVE FEET
Use the feet to protect floors when using your air circulator on
uncarpeted surfaces such as hardwood, vinyl, or tile. The feet are
simple to install and will help maintain the whisper-quiet operation.
STAND ASSEMBLY
(Model 783)
Screwdriver required
1. Attach Head Assembly
(A) to Extension (B) with
screw provided.
2. Attach Extension (B)
to Base (C) with screw
provided.
HEIGHT ADJUSTMENT
(28 - 40 INCHES)
Add extension (B) for full
40" tall product. Remove
extension (B) for 28" tall
product.
8 English
Nut
A
CUSHION RING FEET
(Model 723)
The cushion ring feet are
packaged separately in the
box. To install, roll all feet onto
the base and space evenly.
For balanced support it is
recommended to use 4 ring feet.
B
CUSHION PADS
(Model 733)
Use guide marks on base bottom
for location.
C
1. Place 4 pads over the 4 edge
bends.
2. Place 2 pads on each of the
curved ends.
CLEANING
GRILL REMOVAL
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.
1. Depress one of the grill clips (A) by placing your thumb
against the outside surface of the clip and pressing
downward towards the motor, applying slight pressure
forward. Usually by releasing one clip, the grill can be
removed. If the grill cannot be removed, repeat the process
on remaining clips.
A flathead screwdriver can also be used if the clips are
difficult to release.
2. Replace by lining up the clips with the holes and firmly
snapping the grill back into place.
A
Note: The motor is
permanently lubricated
and requires no oiling.
English
9
CLEANING
BLADE REMOVAL
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing blade.
1. Pull the blade straight out from the
shaft.
2. Wipe the Blade with a damp cloth.
If your circulator is used in a greasy
environment, such as a kitchen,
mild soap or a common household
cleaner may be necessary. Do not
use solvents. Do not place blade in
the dishwasher. The excessive heat
can distort the plastic.
3. To reattach - be certain the flat
side of the shaft aligns directly with
the corresponding flat side on the
blade’s socket. Push the blade all
the way on the shaft until it bottoms
out. Do not use a hammer as this
could result in bearing damage.
10 English
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTIONPROBLEM
The unit fails to power on.
Airflow is weak or slow.
GFCI has tripped.
Unit is not plugged in. Plug Power Cord into electrical outlet.
Ensure unit fan speed setting is selected.
Plug fuse has blown. Replace fuse (See USER SERVICING INSTRUCTIONS on page 5).
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualified electrician.
Unit set to a low speed setting. Adjust to a higher speed setting.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip
when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not
connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualified
electrician to check the GFCI outlet.
English
11
Loading...