Vornado Tower Circulator, 184, 154, 173, 153 Owner's Manual

READ AND SAVE THESE INSTRUCTIONS

Tower Circulator Owner’s Guide

LEER Y GUARDAR ESTAS INSTRUCCIONES

Guía Del Propietario Del Ventilado Torre

LISEZ ET CONSERVEZ CES INSTRUCTIONS

Mode D’emploi Du Ventilateur Tour Pour Toute La Piéce

www.vornado.com

2 English

Designed, engineered and supported in Andover, Kansas.

Pensado, diseñado y respaldado en Andover, Kansas.

Conception, mise au point et soutien technique effectués à Andover, au Kansa

Questions or comments?

¿

Prequntas o comentarios?

Questions ou commentaires?

www.vornado.com

[e-mail]

800.234.0604

3

English

Español p. 13
Français p. 23

Important Instructions ........................................................................ 4

Vornado V-Flow™ Circulation ............................................................. 6

Features and Benefits ......................................................................... 7

Base Assembly Instructions ................................................................ 7

How To Use ......................................................................................... 8

Controls ...............................................................................................9

Operating Tips .................................................................................. 10

Cleaning and Storage ....................................................................... 10

Troubleshooting ............................................................................... 11

Warranty ............................................................................................ 12

Contents

4 English

This appliance has a polarized plug. (One blade is wider than the other.)
To reduce the risk of electrical shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to defeat this safety feature.

WARNING – To reduce the risk of fire or electrical shock, do not use this
product with any solid state speed control device. To reduce the risk of
fire or electric shock and injury to persons, do not use in a window.

This product employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and check the product.
If the replacement fuse blows, a short-circuit may be present and the
product should be discarded or returned to an authorized service facility
for examination and/or repair.

 Do unplug your Tower Circulator before cleaning.
 Do clean your Vornado Tower Circulator regularly. Refer to the

CLEANING instructions provided. Never clean the air circulator in any
manner other than as instructed in this manual.

 Do Not use gasoline, thinners, solvents, ammonia or other chemicals

for cleaning.

 Do Not immerse this product in water or allow water to drip into the

motor housing.

 Do Not use near furnaces, fireplaces, stoves or other high-temperature

heat sources.

 Do Not position this product too close to draperies because they may

be drawn into the rear grill, cutting off airflow.

 Do Not use this product outdoors.

 Do Not use this product on wet surfaces.
 Do Not use this product in a bathtub or shower.
 Do Not use this product if it has a damaged cord or plug. Discard fan or

return to an authorized service facility for examination and/or repair.

 Do Not carry this product by the cord, or use the cord as a handle.
 Do Not attempt to repair or replace parts.
 Do Not run cord under carpeting. Do Not cover cord with throw rugs,

runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.

 Do Not operate the Tower Circulator on an elevated surface, such as a

shelf or desktop, use only while placed on the floor.

 Do use common sense when using this product and/or any electrical

appliance.

User Servicing Instructions

Grasp plug and remove from the receptacle or other outlet device. Do
not unplug by pulling on cord. Open fuse cover (A.) by sliding access
cover on top of attachment plug towards blades. Remove fuse (B.)
carefully by gently prying out the ends of the fuse from the receptacle.

Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. Contact
Vornado customer service for replacement fuse. Phone: [phone],
email: [e-mail]

Install replacement fuse (C.) by first placing the end of the fuse into the
fuse receptacle which is opposite of the blades of the plug, then carefully
push in the other end. Only push against the metal end of the fuse, not

IMPORTANT INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS TOWER.

5

English

the glass center portion. Close the fuse access cover (D.) by sliding the
cover back into the plug until it is completely closed, latches and is flush
with the face of the plug. Risk of fire. Do not replace attachment plug.
Contains a safety device (fuse, AFCI, LCDI) that should not be removed.
Discard product if the attachment plug is damaged.

This unit requires one (1) lithium coin cell battery (CR2032), 3 Volt
(included). DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY
EXPLODE OR LEAK.

WARNING: Keep away from children. If swallowed call [phone] or
[phone], in Canada [phone].

NOTE: This equipment has been tested and found to comply with
the limits for Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

SAVE THESE INSTRUCTIONS

A. B. C. D.

IMPORTANT INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS TOWER.

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and the receiver.
 Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) his device must accept any interference received,
including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.

6 English

Vornado V-Flow™ Circulation

Typical Tower Fan

Typical tower fans oscillate due

to limited range of air movement.

You feel the airflow for only

seconds at a time.

Trust.

It is said that trust isn’t given, but earned. For decades Vornado has
been earning the trust of our customers by offering them only the
best. Vornado provides the highest level of performance, coupled
with the highest level of support available. Complete satisfaction
with no exceptions – this is Vornado’s promise to you. If you are
not satisfied for any reason, please contact us. Knowledgeable
representatives are available at 1-800-234-0604 from 7:00 AM to 6:00
PM CST. A wealth of additional support is also available online at
www.vornado.com. On behalf of myself and the entire staff at our
Andover, Kansas headquarters – thank you for selecting Vornado.

Sincerely,
Bill Phillips
CEO, Vornado Air

Find our complete product line at www.vornado.com

N

O

O

S

C

I

L

L

A

T

I

O

N

N

E

E

D

E

D

With V-Flow™ Circulation

V-Flow™ Circulation is a wide

span of constant airflow that

allows a Vornado to provide true

whole room circulation.

Maximize your cooling and heating efficiency.

7

English

Benefit

With push-button controls and multiple speeds,
any circulation need will be met.

Timer is easily set to turn off the unit in 1, 2, 4,
or 8 hours. Selected timer setting light will be
illuminated.

Solid base design eliminates the typical wobble
of common tower fans.

Remote control adds convenience, and stores
easily atop the fan using a magnetic cradle.

Saves energy by maximizing the performance
of cooling systems. When you use a Vornado
Tower Circulator, you will not have to set your
summertime thermostat as low.

Features and Benefits

Tools Needed:

Phillips head screwdriver

Base Assembly Instructions

1. Assemble the two base halves together. Position the base

half with the alignment pin, over the other base half with the
alignment sockets. Press the two halves together until flush.
(See Figure A.)

2. Assemble the base to the tower bottom. With the Tower on

its side, align the 4 base sockets onto the Tower bottom pins.
Note; one of the 4 pins is “D” shaped to allow it to fit only
one way. With the base in position, secure the base bottom
to the tower with the 4 Phillip screws provided. Tighten the
screws securely but do not over tighten. (See Figure B)

Figure A Figure B

8 English

Positioning Your Circulator

1. Position your Tower Circulator so the airstream has an unobstructed

path from one side of the room to the other, or position the
airstream to blow directly at you for direct cooling.

2. Set to a medium speed and allow a few minutes for an airflow

pattern to be established. (Different airflow patterns can be
established by changing the location, and speed of the Tower
Circulator.)

3. Adjust the speed accordingly until a desired comfort level is

achieved. You will quickly determine the precise amount of
circulation required to maintain your personal comfort in a given
room for the prevailing temperature and humidity conditions. Once
you discover the added comfort of air circulation, you will use your
Vornado Tower Circulator season after season.

How To Use

Placement near a wall or corner

Please position at least 6” away
from walls or other large surfaces.
Doing so will ensure your Tower
Circulator has adequate room
to intake air, providing optimum
performance. (See Figure A)

Directing the airflow

Unlike any other tower
fan, this product creates a
wide span of airflow called
V-Flow™ Circulation. The
Vornado logo indicates
the center point of the
V-Flow™ airstream, and
can be used as a reference
point for positioning the
product in the room. (See
Figure B)

6”

6”

Figure A

Figure B

9

English

Power (A) The unit functions ON and OFF by pressing the
POWER button. Lights on the unit’s control panel indicate the
power is ON.

Fan Speed (B) The fan speed can be adjusted by pressing the
SPEED button. Press the button to switch between the unit’s
speed settings. The turbo (highest) setting is for maximum air
circulation (available on 154 and 184 only). Lights on the unit’s
control panel indicate the selected speed setting.

Timer (C) The unit has an automatic timer to turn the unit OFF
at intervals of 1, 2, 4 or 8 hours. To set the timer, turn the unit
on and select desired speed. Press the timer button until the
desired run time light is illuminated. The unit will continue to
run until that amount of time has expired.

Models 184 and 154

feature 4 speed settings

Models 173, 153 and 143

feature 3 speed settings

Controls

Remote Control This unit comes with a remote control. The
remote control functions are the same as the control panel on
the unit. The remote requires a line-of-sight path to allow for
the signal to be received by the unit. Position the unit so the
receiver lens (located above the Vornado logo) is visible from
the remote control. The remote control can be stored with
the Tower Circulator using the magnetic bowl-shaped cradle
located on the top of the product.

Remote Control Battery The remote control comes with a 3
Volt lithium coin cell battery (CR2032). To install, remove the
battery cover on the bottom of the remote control. Remove any
plastic protection from the battery and place it in the remote
with the + side facing out. Then reposition the cover onto the
bottom of the remote. If your remote does not work, please try
replacing with a new 3 Volt CR2032 battery.

1 4

3

2

A

B

C

10 English

How to Clean

 Your Tower Circulator has no user

serviceable parts. Do not disassemble
the unit. This will void your warranty. If
service is required, return your circulator
to Vornado (see WARRANTY for
instructions on page 12).

 The motor is permanently lubricated

and requires no oiling.

Because your Tower Circulator moves a substantial amount of air, it
will need regular cleaning. To clean follow these simple instructions:

1. Unplug the unit.

Note: Do not use gasoline, thinners, solvents or other

chemicals for cleaning

.

2. Use the brush attachment on your household vacuum

cleaner to vacuum any accumulated dust off the Front
Angled Outlet Grill and Side Inlet Grill. Wipe down the

entire surface with a soft cloth.

Storage

It is recommended to store your Tower Circulator by following these
instructions:

1. Unplug power cord and bundle loosely.

2. Thoroughly clean your Tower Circulator (see instructions above).

3. Cover, or place back in retail carton if available. This will prevent

the unit from accumulating dust overtime.

4. Store unit in a cool and dry location.

Getting the Most From Your Circulator

Thank you for your purchase. It’s important for you to know that this
product functions very differently than typical tower fans you may
have used in the past. Here are a few things to keep in mind:

Expect Powerful Circulation

Your Tower Circulator is designed to move considerably more air than
a traditional tower fan. Consider the following as you adjust product
settings.

Operating Tips

Ultra-high volume airflow. Increased sound lev­els may be perceptible due to airflow volume
and velocity.

High volume airflow. Rapidly moves air across
the room for efficient cooling. Increased sound
levels may be perceptible due to airflow volume
and velocity.

Superior circulation power compared to tradi­tional tower fans on their high setting. May be
preferred for day-to-day use.

Near-silent operation while offering steady cir­culation.

Turbo Setting

(184 and 154 only)

High Setting

Middle Setting(s)

Low Setting

Cleaning and Storage

View cleaning tutorial

on your mobile device.

11

English

Troubleshooting

Unit is not plugged in. Plug Power Cord into electrical outlet.

Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.

Fuse needs to be replaced. See IMPORTANT INSTRUCTIONS for how to replace the fuse or contact Consumer Service.

Ensure unit is set to highest setting for maximum air circulation.

Allow the unit to fully circulate the air throughout the room, this may take several minutes.

Ensure all air inlets and outlet grill are unobstructed.

The battery is packaged separately and may not be installed. Refer to CONTROLS - Remote Control Battery on page 9
for instructions.

The battery is dead. Replace with new 3 volt CR2032 battery. Refer to CONTROLS - Remote Control Battery on page 9
for instructions.

The remote requires a line-of-sight path to allow for the signal to be received by the unit. Position the unit so the
receiver lens (located above the Vornado logo) is visible from the remote control.

Unit fails to
power on.

Unit is not pro­ducing sufficient
amount of air.

Remote Control
is not working.

Problem Possible Cause and Solution