Voodoo Lab Pedal Power ISO-5 User's Manual

PEDAL POWER ISO-5

User’s Manual

(Preliminary)

www.voodoolab.com

Copyright ©2009 by Digital Music Corporation.
This publication is protected by copyright and all rights are reserved. No part of it may be

reproduced or transmitted by any means or in any form without the express prior
consent in writing from Digital Music Corporation. Voodoo Lab and Pedal Power are
trademarks of Digital Music Corp.

rev 0.7

Introduction

Pedal Power ISO-5 is an isolated power supply for powering guitar pedal effects
and accessories. Its compact design is perfect for smaller pedalboards, rack
shelves, or even as an additional power supply for larger boards. Pedal Power
ISO-5 features five independent, filtered and regulated output sections, which will
keep even the most sensitive vintage and boutique analog pedals dead quiet.

Pedal Power ISO-5 includes a high-current output which will properly power
modern digital power-hungry effects like those from Eventide, Line 6, and TC
Electronic. There’s also a dedicated 18V output for those pedals which need the
higher voltage for extra headroom.

Designed to meet the needs of professional users, Pedal Power ISO-5 will
provide clean, consistent power, even with the poor AC line conditions often
found on stage. Completely isolated output sections eliminate ground loops and
unwanted interactions between effects, resulting in lower noise and noticeably
improved tone.

All Voodoo Lab products are engineered and handmade in the U.S.A.

Unpacking
Your Voodoo Lab Pedal Power ISO-5 box should contain the following:
Pedal Power ISO-5 unit
Warranty card
AC line cord
DC Power cables:

5.5x2.1mm right angle barrel connectors (4)

5.5x2.1mm right angle to straight barrel connector (1)

5.5x2.5mm right angle “red” barrel (1)

3.5mm right angle mini plug (1)