Voodoo Lab Pedal Power AC User Manual

PEDAL POWER

AC

User’s Manual

Copyright 2005-2008 by Digital Music Corporation.

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted

by any means or in any form without the express prior consent in writing from Digital Music Corporation.

Voodoo Lab and Pedal Power are trademarks of Digital Music Corp.

VOODOO LAB PEDAL POWER AC

User’s Manual

Introduction

The Voodoo Lab Pedal Power AC is the finest power supply available for AC powered
guitar effects and accessories. It’s the only professional solution for powering vacuum tube
overdrives and effects, MIDI footcontrollers, and high current digital processors--without
cumbersome and noise inducing wall warts.

The Pedal Power AC provides four isolated outputs, two 9VAC and two selectable between
9 and 12VAC. Each output is short-circuit protected and completely isolated. This insures
reliable operation, free of hum and noise.

Please take the time to read this entire manual before operating your Voodoo Lab Pedal
Power AC. This will eliminate the possibility of damage from improper usage. You can also
visit our web site at www.voodoolab.com for the latest information on this and other
products.

The U.S. model (120V input) can operate from 50Hz or 60Hz mains to allow use with a
step-down transformer in 50Hz countries.

Unpacking

Your Voodoo Lab Pedal Power AC box should contain the following:

Pedal Power AC system unit.
Warranty card.
AC mains line cord.
AC power cables:

5.5x2.5mm barrel (4) - red both ends

5.5x2.1mm barrel (2) - one end black

Please take a moment to fill out and mail your warranty card. This will register your warranty
and allow us to notify you with updates and new product information. Don’t worry, we
respect your privacy and never sell our mailing list.