Voodoo Lab MONDO User Manual

PEDAL POWER

MONDO

User’s Manual

www.voodoolab.com

Copyright ©2012 by Digital Music Corporation.

This publication is protected by copyright and all rights are reserved. Voodoo Lab and
Pedal Power are trademarks of Digital Music Corp.

rev 1.0

TABLE OF CONTENTS

Introduction . . . . 2

Unpacking . . . . 3

Connections . . . . 3

DIP Switches . . . . 5

DC Power Cables . . . 6

Strymon . . . . 6

Boss . . . . . 6

Line 6 . . . . . 7

TC Electronic . . . . 7

Eventide . . . . . 7

Additional Cables . . . 8

About Isolation . . . 9

Specifications . . . . 10

Warranty . . . . . 11

How to Reach Us . . . 11

Introduction

Pedal Power MONDO is a high-current capable supply that can power the largest

and most diverse pedalboards. With twelve independent, filtered and regulated

output sections, Pedal Power MONDO can properly power modern DSP-based

effects and all 9V battery operated pedals and accessories.

Nearly all DSP-based effects made today are supplied with digital switching

power adapters, which produce significant high frequency noise. Because Pedal

Power MONDO is an audiophile quality linear (analog) supply, there are no

digital artifacts to introduce into your signal path. And, its ultra low-noise design

keeps the most sensitive vintage and boutique analog pedals dead quiet.

All linear, transformer-based power supplies generate heat. While other high-

power linear supplies operate at excessively high internal temperatures (which

will limit their long term reliability), Pedal Power MONDO includes many

exclusive design features to keep internal temperatures within proper limits to

guarantee long-term reliability.

Designed to meet the needs of professional users, Pedal Power MONDO

provides clean, consistent power, even under the poor AC line conditions often

found on stage. Completely isolated output sections eliminate ground loops and

unwanted interactions between effects, resulting in lower noise and noticeably

improved tone.

All Voodoo Lab products are designed and manufactured in the U.S.A.

- 2 -