MICRO
User’s Manual
Voodoo Lab guitar effect pedals are handcrafted from the finest modern and vintage components.
They are housed in rugged aluminum cases with heavy duty metal switches. True bypass switching is
used for absolutely no loss of tone when the pedal is bypassed. All Voodoo Lab products are
designed and manufactured in California. For more information about Voodoo Lab products,
please visit our web site at www.voodoolab.com.
Description
The Univibe was designed in 1968 as a rotating speaker simulator. It achieved legendary status on
land- mark recordings by Jimi Hendrix, Robin Trower and Stevie Ray Vaughan. Often described as
a chorus effect, the Univibe circuit is actually a variation of a four stage phase shifter. The Voodoo
Lab Microvibe includes the same sinewave oscillator, incandescent lamp and photocells which
provide the Univibe’s unique “feel.” Our Microvibe delivers the same lush, psychedelic tone of the
original, but in a compact, battery operated pedal.
Operation
Here are some sample settings to get you started:
1. Elementary Psychedelic: Set the Intensity at about 4:00 and the Speed around half or a little
more. In general, as you increase the speed you should decrease the intensity.
2. Leslie Speaker: Set the Intensity around half and the Speed all the way up.
Plugging into the input jack turns on the power to your Microvibe. To preserve battery life,
disconnect the input cable when not in use.
Battery
The Voodoo Lab Microvibe is powered by a single 9V battery. To replace the battery, remove the
four screws which secure the bottom cover. Always use alkaline batteries in your Microvibe for the
longest battery life and most consistent tone.
External Power
The Voodoo Lab Microvibe can be powered externally with a regulated 9VDC power supply
eliminating the need for the internal battery. The external power supply connector is a 5.5x2.1mm
barrel with center negative polarity.
VIBE
Warranty (North America only)
Voodoo Lab warrants this product against any defects that are due to faulty material or
workmanship for a period of five years from the date of original retail purchase. This warranty
does not include damage to the product resulting from accident or misuse. This warranty is given
to the original purchaser only and it is not assignable to any other person.
If the product should become defective within the warranty period, Voodoo Lab will repair it or
replace it free of charge, provided it is returned freight prepaid to Voodoo Lab with a valid RMA
(return material authorization) number.
This warranty shall not apply to any goods that have been repaired or altered by anyone other than
the manufacturer. There are no warranties which extend beyond the terms described herein.
Should you experience any difficulty with this Voodoo Lab product, contact us as described below.
If it is determined that the product must be returned to the factory for repair, you will be issued an
RMA and given shipping and packaging instructions.
Warranty (Outside North America)
Regions outside North American please contact your country’s distributor for warranty
information.
How to Reach Us
You can reach us by the following:
Tel: 707 545 0600
Fax: 707 545 9777
Mail: Voodoo Lab
3165 Coffey Lane, Santa Rosa, CA 95403
Email: info@voodoolab.com
Web si te: www.voodoolab.com
Forum: voodoolab.com/forum
Copyright 1998-2007 by Digital Music Corporation. Voodoo Lab and Pedal Power are trademarks of Digital Music Corp. Printed in U.S.A.
Loading...