Voodoo Lab HEX User Manual

HEX

User’s Manual

(Preliminary)

www.voodoolab.com

Copyright ©2014 by Digital Music Corporation.
This publication is protected by copyright and all rights are reserved.

Voodoo Lab, Pedal Power, Ground Control, Commander and Pedal Switcher are
trademarks of Digital Music Corp.

rev 0.8 12/2014

CONTENTS

INTRODUCTION . . . . . . . . 2

Overview
Front Panel
Rear Panel

CONNECTIONS . . . . . . . . 4

Power
MIDI
Audio

OPERATION . . . . . . . . . 5

Overview
Use with Ground Control Pro
Use with Commander
Use with Other MIDI Controllers

SETUP . . . . . . . . . . . 7

Enable MIDI Messages
Set MIDI Channel
Select MIDI Control Change Numbers
Quiet Switching
Factory Restore

WARRANTY . . . . . . . . . 10

HOW TO REACH US . . . . . . . 10

INTRODUCTION

Overview

Voodoo Lab HEX is a 6 loop true bypass audio switcher for adding automation to
guitar racks and pedalboards. Loops use the finest gold contact relays sealed in
nitrogen to be absolutely transparent. Using the Voodoo Lab Ground Control Pro
or Commander, or any other MIDI controller, you can instantly recall preset
combinations of effects.

HEX is organized as 5 series loops plus 1 isolated loop to provide routing
flexibility. The isolated loop can also be used as an A/B selector, amp channel
switching or remote tap tempo.

HEX is very compact, so it can be mounted on a rack shelf or pedalboard. With
the optional rack mount bracket, you can fit 2 HEX units in a single rack space.

Front Panel

1. Power LED. Indicates HEX is powered on.

2. Buttons / LEDs. Toggle loops on and off. These are also used for setup
functions and to save presets when not using a Voodoo Lab controller.

2