Voodoo Lab Amp Selector User Manual

AMP SELECTOR

Owner’s Manual

Version 1.0

VOODOO LAB AMP SELECTOR

User’s Manual

Introduction

The Voodoo Lab Amp Selector is the ultimate stand-alone tool for switching your guitar
into multiple amplifiers. It lets you use up to four amps simultaneously without added
hum or loss of tone. You can switch between them or layer them in any combination.
The switching is absolutely silent with no clicks or pops. If you play multiple amplifiers,
this is what you’ve been waiting for!

The Amp Selector’s unique programmable switching lets you tailor its operation to your
own playing style. On/off mode allows you to operate it as four independent on/off controls.
Or exclusive mode means that whichever button you select, only that amplifier is active.
This permits you to change amps with only a single button press, no need to first turn one
off and then another on. You can even use both modes simultaneously to provide one
touch control yet still select an additional amp for layering!

Level controls for each output provide a convenient way to balance the volume between
amps. There is also second input which if used will split the Amp Selector into two separate
A/B/Both functions. This is great for applications using two guitars (electric and acoustic,
for example) or a stereo signal path. And we included a tuner out‚ which gives you an
additional output without loading down your guitar’s tone. Of course you can use this
output to run a tuner, but it can also drive a direct signal to a console or even chain
additional Amp Selectors if you need more than four amps.

Voodoo Lab provides tone tools for the serious artist and professional player. Your Amp
Selector is hand made using the finest possible components and engineered to be rugged,
reliable and provide the best possible tone. Enjoy it!

2