Vollrath 72109 User Manual

WARMERS: 4/3 THERMOSET DROP-IN

The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: [phone]
Service Tel: [phone]
FAX: [phone]

Vollrath of Canada, Co.
Tel: [phone]
FAX: [phone]

www.vollrathco.com

Agency Listings

72109 120V AC, 1600W
72112 240V AC, 1600W
72111 120V AC, 1600W (Canada Only)

MODELS
TD43R-DI:

Approvals

Date:

4/3 Thermoset Drop-in Warmer

DESCRIPTION

Drop-in is designed with a self-insulating thermoset well
for ease of installation in solid-surface, laminate, or
metal countertops. Minimal heat transfer to the work
surface allows the drop-in to be installed without a
breaker strip.

Drop-in has an integral drain. Molded tailpiece
extension allows the drain to be routed to fit cabinet
interior clearances.

The thermoset well drop-in has two cast aluminum
dome elements mounted in the bottom of the well for
efficient energy transfer. Dome elements require that
the unit must be used with water in the well.

Project:

Item Number:

Quantity:

FEATURES

❑ Thermoset fiber-reinforced, self-insulating resin

well provides maximum energy efficiency

❑ Low water indicator light eliminates guesswork

❑ No-drip lip on top rim of well

❑ Dome elements positioned inside well for

maximum energy transfer

❑ Non-stick coating on elements for easy clean-up

❑ Top-mount for ease of installation

❑ Holds up to four 1/3 size, 4" (10.2 cm) deep pans

for greater serving capacity

❑ Thermostatic temperature control

❑ Low water indicator light eliminates guesswork

❑ 5-ft. (152.4 cm) cord and plug

❑ 5-ft. (152.4 cm) control cable for remote

installations

❑ Meets NSF4 hot holding and rethermalization

performance standards

❑ UL Listed

Warmers: 4/3 Thermoset Drop-in

The Vollrath Company, L.L.C.

PERFORMANCE CRITERIA

Drop-in warmer is designed to hold heated prepared
foods at temperatures above the HACCP “danger zone”
of 140
measured using the NSF mixture preheated to 165
(73.9
this product above 150
will be maintained best when the food product is held
using pans with covers, the proper water level is
maintained in the well, and the food product is stirred
regularly.

 F (60 C). The performance standard is

 F

 C). The electric unit will hold the temperature of

 F (65.6 C). The temperature

WARMERS: 4/3 THERMOSET DROP-IN

www.vollrathco.com

The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: [phone]
Service Tel: [phone]
FAX: [phone]

Vollrath of Canada, Co.
Tel: [phone]
FAX: [phone]

5-15R

120V

Receptacles

6-15R

208 - 240V

5-20R

120V

DIMENSIONS AND RATINGS

❑ Overall dimension with drain valve: 28¾" x 13¾" x 14" (73.025 cm x 34.925 cm x 35.56 cm)
❑ Maximum cutout dimension: 27½" x 13¼" (69.8 cm x 33.655 cm)

Item

72109 13¼ x 27½

(33.6 x 69.8)

72112 13¼ x 27½

(33.6 x 69.8)

Warmers: 4/3 Thermoset Drop-inThe Vollrath Company, L.L.C.

72111 13¼ x 27½

(33.6 x 69.8)

Cutout

Dimensions

IN (CM)

Control Box Cutout

Dimensions

IN (CM)

6³⁄₈ x 5⁷⁄₈

(16.129 x 14.923)

.

6³⁄₈ x 5⁷⁄₈

(16.129 x 14.923)

6³⁄₈ x 5⁷⁄₈

(16.129 x 14.923)

Dimensions
(L X W X H)

IN (CM) Voltage Watts Amps Plug

28¾ x 13¾ x 13¹⁄₁₆

120V AC 1600 13.3 5-15P 1

(73 x 34.9 x 33.2)

28¾ x 13¾ x 13¹⁄₁₆

240V AC 1600 7.7 6-15P 1

(73 x 34.9 x 33.2)

28¾ x 13¾ x 13¹⁄₁₆

120V AC 1600 13.3 5-20P 1

(73 x 34.9 x 33.2)

Case

Lot

©

2009 The Vollrath Company L.L.C Form Number L35562 Rev. 3/09

Printed in USA