How it Works
Vollrath
Loading...
3667101U
Installation Manual
8 pgs1.44 Mb0
User Manual
2 pgs800.18 Kb0

Vollrath 3667101U User Manual

Project:
www.vollrathco.com
Agency Certifications
Item Number:
Quantity:
MODULAR DROP-IN: HOT/COLD TOP AND BOTTOM MOUNT WELLS
MODELS
3667101D Single Pan Drop-in, Top Mount, 120V 3667102D Single Pan Drop-in, Top Mount, 120/208-240V 3667101U Single Pan Drop-in, Bottom Mount, 120V 3667102U Single Pan Drop-in, Bottom Mount, 120/208-240V
FEATURES
❑ Top is 18-gauge 300 series stainless steel, with a flat work
surface around the opening and die stamped with full­perimeter drip edge. A molded breaker gasket is fitted under the drip edge.
❑ Seamless well is 18-gauge 300 series stainless steel
Modular Drop-In: Hot/Cold Top-Mount Well
DESCRIPTION
The modular drop-in can operate either hot or cold and is available in both top-mount and bottom-mount configurations. In cold operation, the well meets NSF7 standards. In hot operation, the well meets NSF4 when using moist heat.
A full-perimeter drip edge contains spills and condensation within the stainless steel countertop area of the drop-in.
High-density polyurethane foam insulation surrounds the exterior of the well to provide most efficient performance with energy savings.
A 3" (7.62 cm) recess lowers the food pan below the work surface to minimize the impact of ambient air.
Modular drop-in orders cannot be canceled or returned.
❑ Exterior housing is 18-gauge galvanized steel ❑ Refrigeration coils surround the exterior side walls of the
well for maximum cooling
❑ 625 Watt rope heater is attached to the bottom of well ❑ The inner well assembly is insulated with foamed-in-place
polyurethane foam insulation
❑ Hot/Cold operation toggle switch with lighted indicator ❑ On/Off switch is mounted on side the control box ❑ Thermostatic hot control ❑ Factory set cold control on compressor ❑ Condensing unit suspended below well ❑ ¾" (1.9 cm) integral drain is standard ❑ Unit comes with cord and plug and does not require hard
wiring
❑ Positioning clips are provided to center drop-in within the
cutout
❑ For complete air circulation, two openings in the cabinet
are required. Louver cutout size is 8" x 10" (20.3 cm x 25.4 cm).
❑ One year parts and labor warranty. Additional four years on
compressor
Modular Drop-in: Hot/Cold Top and Bottom Mount Wells
The Vollrath Company, L.L.C.
Due to continued product improvement, please consult www.vollrathco.com for current product specifications.
WARRANTY: All models shown come with Vollrath’s standard warranty against defects in materials and workmanship. For full warranty details, please refer to the Vollrath Equipment and Small­wares Catalog.
Approvals Date
www.vollrathco.com
The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A. Customer Service: 800.628.0830 Canada Customer Service: 800.695.8560 Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832 Technical Services Fax: 920.459.5462
Top Mo u n t
Bottom Mount
Front View Side ViewTop View
13¼ (33.7)
Inside Upper
Front View Side ViewTop V i e w
11⁷⁄₈ (30.2)
Inside Lower
22 (55.9)
Inside Upper
19⁷⁄₈ (50.5)
Inside Lower
16⁷⁄₈ (52.9)
Overall Flange
14½
(36.8)
25¹⁄₈ (63.8)
Overall Flange
11¹¹⁄₁₆
(29.7)
24¹⁄₁₆
(61.1)
23⁷⁄₈
(60.6)
13¼ (33.7)
Inside Upper
11⁷⁄₈ (30.2)
Inside Lower
22 (55.9)
Inside Upper
19⁷⁄₈ (50.5)
Inside Lower
18¹⁄₁₆ (45.9)
Overall Flange
17⁵⁄₁₆ (44)
Cutout
Opening
14½
(36.8)
26 (66)
Overall Flange
25¼ (66.1)
Cutout
Opening
³⁄₈ (1)
Rise above countertop
10½
(267)
23⁷⁄₈
(60.6)
¾ (1.9)
Minimum
Space
Required
¾ (1.9)
Minimum
Space
Required
6½ (16.5) Inner Well
6½ (16.5) Inner Well
NOTE: Vollrath drop-ins are made to order and cannot be returned. It is the responsibility of the installer to ensure
cut-outs on new installations are correct, or retrofit installation dimensions match up with Vollrath product dimensions.
Vollrath will not guarantee that our models retrofit with specific competitive models (as competitive specifications can
change without notice). We recommend countertop cut-outs be made after receipt of the Vollrath drop-in, to ensure
proper fit prior to cutting into countertop materials.
23⁷⁄₈
(60.6)
5-15R
120V
14-20R
120/208-240V
Modular Drop-in: Hot/Cold Top and Bottom Mount Wells
MODULAR DROP-IN: HOT/COLD TOP AND BOTTOM MOUNT WELLS
MODELS
3667101D Top Mount, 120V 3667101U Bottom Mount, 120V 3667102D Top Mount, 120/208-240V 3667102U Bottom Mount, 120/208-240V
DIMENSIONS
❑ Dimensions shown in inches (cm) ❑ Well cutout must have a
⁷⁄₈" (2.22 cm) corner radius
❑ Control cutout: 8
³⁄₈" (9.5 mm) corner radius
³⁄₈" x 7¹⁄₈" (21.3 x 21.3 cm) with a
The Vollrath Company, L.L.C.
ELECTRICAL SPECIFICATIONS
Item Voltage
3667101D 120 5 5.2 5-15P 3667102D 120/208-240V 5 2.3 - 2.6 14-20P 3667101U 120 5 5.2 5-15P 3667102U 120/208-240V 5 2.3 - 2.6 14-20P
Amps
PlugRefrigeration Mode HeatIng Mode
©
2012 The Vollrath Company L.L.C. Form Number L35823 2/12
Receptacles
Y
W
X
Printed in USA
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use