Page 1
NSF7 REFRIGERATED SHORT SIDE DROP-INS
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
www.vollrathco.com
Agency Listings
Project:
Item Number:
Quantity:
NSF7 Refrigerated Short Side Drop-ins
NSF7 Refrigerated Short Side Drop-in
DESCRIPTION
The short side drop-in NSF7 refrigerated cold pans are designed
for top-mount installation.
A full-perimeter drip edge contains spills and condensation within
the stainless steel countertop area of the drop-in.
High-density polyurethane foam insulation surrounds the exterior
of the well to provide the most efficient performance with energy
savings.
A 3" (7.62 cm) recess lowers the food pan below the work surface
to minimize the impact of ambient air. The deep display well is
designed to accommodate standard 12" x 20" (30.4 cm x 50.8 cm)
pans up to 6" (15.24 cm) deep.
Refrigeration coils surround the exterior side walls of well for
maximum cooling. Refrigerant is R134A to meet federal
standards.
MODELS
36653 Two Pan
36656 Three Pan
36659 Four Pan
FEATURES
❑ Top is 18-gauge stainless steel, with ³⁄₈" (9.5 mm) overhang
on all sides and die stamped with full-perimeter drip edge.
Molded breaker gasket is fitted under the drip edge.
❑ Flat work surface around opening.
❑ Seamless well is 18-gauge 300 series stainless steel
❑ 1" (2.5 cm) integral drain is standard.
❑ Inner well assembly insulated with foamed-in-place
polyurethane foam insulation.
❑ Condensing unit suspended below well.
❑ Temperature control on compressor.
❑ For complete air circulation, two 8" x 10" (20.3 cm x 25.4 cm)
openings in the cabinet are required.
❑ Exterior housing is 18-gauge galvanized steel.
❑ Optional perforated false bottom is nominal
1" (2.5 cm) high and constructed of 18-gauge Type 304
stainless steel. False bottom will reduce pan depth by same
dimension.
False bottom options:
Drop-In Model False Bottom Model
36653 70100 – Quantity 2
36656 70100 – Quantity 3
36659 70100 – Quantity 4
❑ Unit comes with a ___________cord and plug and does not
require hard wiring.
❑ On/Off switch is mounted on the side of the compressor
housing.
❑ Positioning clips are provided to center the drop-in within the
cutout.
❑ One year parts and labor warranty. Additional four years
on the compressor.
The Vollrath Company, L.L.C.
Cold drop-ins are best used for holding periods up to
4 hours. For best performance, stainless steel containers are
recommended.
Modular drop-in orders cannot be canceled or returned.
Due to continued product improvement, please consult
www.vollrathco.com for current product specifications.
WARRANTY: All models shown come with Vollrath’s standard
warranty against defects in materials and workmanship. For full
warranty details, please refer to the Vollrath Equipment and
Smallwares Catalog.
Approvals Date
Page 2
NSF7 REFRIGERATED SHORT SIDE DROP-INS
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
Air
Flow
Front View
Side View
To p V i ew
.¾ (1.9)
Minimum space
required TYP.
(Closed ends)
³⁄₈ (.95)
Riser above
countertop
13
(33)
18¹⁄₁₆
(45.9)
22¹³⁄₁₆
(58)
18¹⁵⁄₁₆
(48.1)
B
A
11⁷⁄₈
(30.2)
6⁵⁄₈
(16.8)
5-15R
120V
MODELS
36653 Two-pan
36656 Three-pan
36659 Four-pan
DIMENSIONS
❑ Opening cutout must have a ⁷⁄₈" (2.2 cm) corner radius.
❑ Dimensions shown in inches (cm).
NSF7 Refrigerated Short Side Drop-ins
SPECIFICATIONS
The Vollrath Company, L.L.C.
Item
36653
36656
36659
(A)
Overall
Length
45⁷⁄₁₆
(115.4)
66
(170)
88⁵⁄₁₆
(224.2)
⁷⁄₈
(B)
Interior
Length
40¾
(103.5)
61½
(156.2)
82¼
(209)
Cutout
Length
44¹¹⁄₁₆
(113.5)
66¹⁄₈
(168)
87⁹⁄₁₆
(222.4)
Cutout
Width
17⁵⁄₁₆
(44)
17⁵⁄₁₆
(44)
17⁵⁄₁₆
(44)
Compressor Voltage Amps Plug
1/4 HP 120 4.9 5-15P
1/4 HP 120 4.9 5-15P
1/3 HP 120 4.9 5-15P
Receptacles
©
2012 The Vollrath Company L.L.C. Form Number L35729 3/12
Printed in USA
Loading...