
Project:
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
Agency Listings
Note: Product has not been performance
tested for potentially hazardous foods.
Item Number:
Quantity:
STANDARD REFRIGERATED SHORT SIDE DROP-INS
Standard Refrigerated Short Side Drop-ins
Standard Refrigerated Short Side Drop-in
DESCRIPTION
The short side modular drop-in standard (non-NSF7) refrigerated
cold pans are designed for top-mount installation.
A full-perimeter drip edge contains spills and condensation within
the stainless steel countertop area of the drop-in.
High-density polyurethane foam insulation surrounds the exterior
of the well to provide the most efficient performance with energy
savings.
MODELS
36652 Two Pan
36655 Three Pan
36658 Four Pan
FEATURES
❑ Top is 18-gauge stainless steel, with 3/8" (9.5 mm) overhang
on all sides and die stamped with a full-perimeter drip edge.
Molded breaker gasket is fitted under the drip edge.
❑ Flat work surface around opening.
❑ Seamless well is 18-gauge 300 series stainless steel.
❑ 1" (2.5 cm) integral drain is standard.
❑ Inner well assembly insulated with foamed-in-place
polyurethane foam insulation.
❑ Condensing unit suspended below well.
❑ Temperature control on compressor.
❑ For complete air circulation, two 8" x 10" (20.3 x 25.4 cm)
openings in the cabinet are required.
❑ Exterior housing is 18-gauge galvanized steel.
❑ Optional perforated false bottom is nominal 1" (2.5 cm)
high and constructed of 18-gauge 300 series stainless steel.
False bottom will reduce pan depth by same dimension.
False bottom options:
Drop-In Model False Bottom Model
36652 70100 – Quantity 2
36655 70100 – Quantity 3
36658 70100 – Quantity 4
The Vollrath Company, L.L.C.
The deep display well is designed to accommodate standard
12" x 20" (30.5 x 50.8 cm) pans with adaptor bars.
Refrigeration coils surround the exterior side walls of well for
maximum cooling. Refrigerant is R134A to meet federal
standards.
Refrigerated cold drop-ins are best used for holding periods
up to 4 hours. For best performance, stainless steel containers
are recommended.
Modular drop-in orders cannot be canceled or returned.
Due to continued product improvement, please consult
www.vollrathco.com for current product specifications.
❑ Unit comes with ____________cord and plug and does not
require hard wiring.
❑ On/Off switch is mounted on the side of the compressor
housing.
❑ Positioning clips are provided to center the drop-in within the
cutout.
❑ One-year parts and labor warranty. Additional four years
on the compressor.
WARRANTY: All models shown come with Vollrath’s standard
warranty against defects in materials and workmanship. For full
warranty details, please refer to the Vollrath Equipment and
Smallwares Catalog.
Approvals Date

STANDARD REFRIGERATED SHORT SIDE DROP-INS
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
B
11⁷⁄₈
(30.2)
A
18¹⁵⁄₁₆
(48.1)
13
(33)
.¾ (1.9)
Minimum space
required TYP.
(Closed ends)
Air
Flow
³⁄₈ (.95)
Riser above
countertop
Front View
Side View
Top View
18¹⁄₁₆
(45.9)
22¹³⁄₁₆
(58)
8
(20.3)
MODELS
36652 Two-pan
36653 Three-pan
36654 Four-pan
DIMENSIONS
❑ Opening cutout must have a ⁷⁄₈" (2.2 cm) corner radius.
❑ Dimensions shown in inches (cm).
Standard Refrigerated Short Side Drop-ins
SPECIFICATIONS
The Vollrath Company, L.L.C.
(A)
Overall
Item
36652
36655
36658
Length
45⁷⁄₁₆
(115.4)
66
⁷⁄₈
(170)
88⁵⁄₁₆
(224.2)
(B)
Interior
Length
40¾
(103.5)
61½
(156.2)
82¼
(209)
Cutout
Length
44¹¹⁄₁₆
(113.5)
66¹⁄₈
(168)
87⁹⁄₁₆
(222.4)
Cutout
Width
17⁵⁄₁₆
(44)
17⁵⁄₁₆
(44)
17⁵⁄₁₆
(44)
Compressor Voltage Amps Plug
1/4 HP 120 4.9 5-15P
1/4 HP 120 4.9 5-15P
1/3 HP 120 4.9 5-15P
Receptacles
©
2012 The Vollrath Company L.L.C. Form Number L35728 3/12
Printed in USA