Vogel's TVM3665B, TVM3465B Installation Guide for TVM3465B
TVM 3460 Series
TVM 3660 Series
Full Installation Guide
Everything you need to get your TV safely on the wall, in no time
Before you start
…we just wanted to say thanks for choosing Vogel’s. Smart choice.
And you’re already making another smart choice – reading the manual! Keep reading to learn all about
safe, efficient installation, and how to use your new mount.
TVM 3460/3660 Series - English 1
Stay safe
Warning
Always read these safety instructions carefully before installing and using this product.
Following these instructions is strictly required. Incorrect mounting and/or installation could put
you, your TV, and your family at substantial risk.
Don’t dare risk it… Read all
l Vogel’s recommends that the mounting and/or installation of this product should be carried out
by a suitably qualified expert.
l Vogel’s cannot be held responsible for any injury and/or damage caused by incorrect
installation.
l Please consult the manual for your TV and ensure that the weight and size of the TV is within
the maximum weight and size limits specified for this product, and that the TV mounting bolts
used are of a suitable length and diameter. Note that not all the TV mounting accessories
provided are required for the installation of any one TV.
l The wall mounting accessories provided are exclusively intended for installation on walls made
of solid brick, solid concrete or solid wood columns.
l Any material covering the wall must not exceed 3 mm/ 0.12 inch.
l For mounting on walls made of other materials, such as hollow bricks, wood panels or
plasterboard, please consult your installer and/or specialist supplier.
l Clean the product with a dry, lint-free cloth. Do not use detergents or other solvents to clean the
product.
l Only qualified, certified personnel may repair the product. Use only original spare parts. The
use of other parts will result in voiding the warranty, and could lead to injuries.
l Alterations to the product and technical modifications are not permitted. This will void the
warranty, and could lead to injuries.
l Always store the product in a dry and safe place with a temperature between -10°C to +50°C.
l Handle and transport the product with care.
l Repack the product when transporting or not using it for a longer period of time.
l Lifting your TV is a two-person job. Don’t be bold!
TVM 3460/3660 Series - English 2
What’s in your box?
l Something missing? Make sure your packaging has everything in place:
A. Wall mount
B. Interface bars
C. Interface clips
D. Safety instructions
E. Bolts for fastening strips on TV (see contents below)
F. Spacers
G. Washers Ø 18 mm
H. Screws
I. Plugs (fischer© DuoPower)
J. Washers Ø 22 mm
K. Covers
L. Protective TV patches
M. Cable clips
N. Cable clip for wall plate
O. Spirit level
P. Thumbnut
Q. Clip covers
R. Hole reducers
TVM 3460/3660 Series - English 3
l Contents of the TV fasteners kit:
l 4x M6*12mm bolts
l 4x M6*25mm bolts
l 4x M6*35mm bolts
l 4x M8*12mm bolts
l 4x M8*25mm bolts
l 4x M8*45mm bolts
l 4x M6 washer
l 4x spacer 10mm
l 4x spacer 5mm
You don't need all fasteners to mount your TV. Store the rest for later or other use!
Got your tools ready?
l
Don’t start without all the necessary tools:
l Crosshead screwdriver
l Drilling machine
l 10 mm or 25/64” concrete/brick drill (for concrete/brick walls only)
l 5 mm or 13/64” concrete/brick drill (for concrete/brick walls only)
TVM 3460/3660 Series - English 4
l 5 mm or 13/64” wood drill (for wooden walls only)
l Stud finder (optional)
l Socket wrench no. 13
l Pencil
l M4 (4mm) Allen key
Take care of your safety
l Who cares about looking cool? Always wear personal protective equipment:
l Eye protection
l Ear protection
l Safety shoes
TVM 3460/3660 Series - English 5
Ready… set… get installing!
Step 1: Attach the clips to the TV
1.
Carefully place the TV face down, on a clean surface without any obstacles.
2. Fix the protective TV patches Ⓛ onto the interface clips Ⓒ . Screw the interface clips Ⓒ onto
the TV with the bolts Ⓔ and the hole reducers Ⓡ.
Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer
Care are waiting to help: vogels.com/contact
Make sure bolts and spacers are positioned correctly.
TVM 3460/3660 Series - English 6
Refer to the user manual of your TV for the correct mounting material.
3. Loosen the pre-attached bolts Ⓒ with the allen key Ⓞ .
4. Remove both thumbnuts Ⓟ from the interface bars Ⓑ.
5. Slide the lower interfac e bar Ⓑ through the designated spacing of the interface clips Ⓒ . Make
sure the interface bar Ⓑ is placed in a centered position. Notice the holes on the side of this
interface bar Ⓑ . They need to face downwards.
6. Slide the upper interface bar Ⓑ through the designated spacing of the interface clips Ⓒ. Make
sure this interface bar Ⓑ is also placed in a centered position.
7. Attach both interfac e bars Ⓑ to the strips by tightening the pre-attached bolts Ⓒ with the allen
key Ⓞ .
8. Screw the thumbnut Ⓟ into the upper bar. Make sure you don’t screw it in completely, yet.
9. Click the clip cov ers Ⓠ onto the clips.
TVM 3460/3660 Series - English 7
TVM 3460/3660 Series - English 8
Loading...